قراءة مجانية · حساب مجاني للمساهمةخليفة Anticars (2000)

BMW زد 4

1989–2026 · 4 الأجيال · 12 أعطال موثّقة · 3 أسواق
الأجيال

النشرات الفنية (TSB) تعليمات إصلاح يرسلها المصنعون إلى وكلائهم بشأن مشكلات معروفة. ليست استدعاءات سلامة، لكنها كثيرًا ما تؤكد وجود عطل.

سنة الطراز
السوقالكلEUNAUK
زد 4 Z4 (E85/E86) · 2002–2008
نشرةمتوسطالكهرباءNA

نشرة

Cannot install fog lamp / cruise control retrofit kits. *tt

NHTSA · نشرة المصنع10002305سنوات الطراز 2003معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
زد 4 (G29) · 2018–2026
نشرةمتوسطالكهرباءNA

نشرة

Certain vehicles with a Wireless Charging Tray installed may experience operation issues with ComfortAccess or remote functions.

NHTSA · نشرة المصنع10253731سنوات الطراز 2023معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
زد 4 (E89) · 2009–2016
نشرةمتوسطالكهرباءNA

نشرة

يؤدي عيب تصنيع داخل صمام تحديد الضغط في وحدة توصيل الوقود الكهربائية (مضخة الوقود الموجودة داخل الخزان) إلى صدور ضوضاء أثناء القيادة. ولا يؤدي هذا العيب إلى تعطل مضخة الوقود أو فقدان القدرة.

NHTSA · نشرة المصنع10193493سنوات الطراز 2013ترجمة آلية · اللغة الأصلية: الإنجليزيةعرض التفاصيل →
زد 4 (E89) · 2009–2016
نشرةمتوسطالكهرباءNA

نشرة

Butt connector for repairing a plug connection. The ?top up coolant? message is displayed in the central display (CC message ID 166). When checking the cooling system there are no leaks found and the expansion tank is filled to the proper level.

NHTSA · نشرة المصنع10193494سنوات الطراز 2013معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
زد 4 (G29) · 2018–2026
نشرةمتوسطالكهرباءNA

نشرة

Low Washer Fluid Warning Light is illuminated when the Washer Fluid Tank is Full : The low washer fluid warning is illuminated even though the washer fluid reservoir is full. There are no faults stored in the system for the washer fluid level switch. A non-approved washer fluid was used that is silicone-based. Silicone-based fluids are not compatible with the contactless capacitive level sensor. Fluids that contain a silicone additive are normally colored other than blue.

NHTSA · نشرة المصنع10169468سنوات الطراز 2019معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
زد 4 (G29) · 2018–2026
نشرةمتوسطالكهرباءNA

نشرة

HU-H3 MGU HEAD UNIT DOES NOT START CID REMAINS BLACK: If the ignition is briefly switched off and without the vehicle entering sleep mode the MGU (Media Graphics Unit) head unit does not start The CID display remains black.

NHTSA · نشرة المصنع10166391سنوات الطراز 2019معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
زد 4 (G29) · 2018–2026
نشرةمتوسطالكهرباءNA

نشرة

ERRONEOUS FAULT 1F2505 IS STORED IN THE DME This Service Information bulletin replaces SI B12 30 18 dated November 2018. This fault does not cause any drivability complaints or engine warning lamps.

NHTSA · نشرة المصنع10163998سنوات الطراز 2019معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
زد 4 (G29) · 2018–2026
نشرةمتوسطالكهرباءNA

نشرة

The Low Washer Fluid Warning Light is illuminated when the Washer Fluid Tank is Full This Service Information bulletin supersedes SI B61 23 15 dated April 2016.

NHTSA · نشرة المصنع10160350سنوات الطراز 2019معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
زد 4 (G29) · 2018–2026
نشرةمتوسطالكهرباءNA

نشرة

The Low Washer Fluid Warning Light is illuminated when the Washer Fluid Tank is Full This Service Information bulletin supersedes SI B61 23 15 dated April 2016.

NHTSA · نشرة المصنع10160267سنوات الطراز 2019معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
زد 4 (E89) · 2009–2016
نشرةمتوسطالكهرباءNA

نشرة

BMW Parts Bulletin TEC1T RDC Module Return BMW NA has requested the inspection of the following part numbers: 36 10 6 856 227 and 36 10 6 798 872 Stock should not be sold or installed on any vehicle. Please return the part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC1T must appear in the text of your TEC claim. TEC1T is valid from May 30, 2013, through June 13, 2013.The deadline for filing a claim under TEC1T is June 13, 2013. All parts must be returned to your facing RDC no later than June 27, 2013. Part number 36 10 6 856 227: All parts with an index of 02 and older must be returned. All parts with an index of 03 are correct. Part number 36 10 6 798 872: All parts with an index of 03 and older must be returned. All parts with an index of 04 are correct. The Index is the two digit code under the bar code located on the box label. The Index can also be found on the part itself just after the part number. Please re-order the same part number as needed. (c) 2013, BMW of North America, LLC. The contents of this document are confidential and should not be shared with third parties for distribution.

NHTSA · نشرة المصنع10150084معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
زد 4 (E89) · 2009–2016
نشرةمتوسطالكهرباءNA

نشرة

CLOSED-CIRCUIT CURRENT MONITORING. Increased closed-circuit currents may occur permanently or intermittently and cause the battery to discharge prematurely. The increase in closed-circuit current may be caused by a faulty control module or by the installation of a non-approved accessory. In a situation where a vehicle has broken down due to a discharged battery, for diagnostic purposes it is important not to disconnect the battery. This is because a control module will be reset if the battery is disconnected. Following a reset, the faulty control module may start functioning correctly again, making accurate diagnosis impossible. To correctly measure closed-circuit current, the 50-amp or 100-amp clip-on probe can be used in conjunction with the IMIB (Integrated Measurement Interface Box) to properly diagnose closed-circuit current problems over an extended period of time.

NHTSA · نشرة المصنع10149555معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
زد 4 (E89) · 2009–2016
نشرةمتوسطالكهرباءNA

نشرة

2013 MINI JCW Paddle Shifter Retrofit. SZL to EGS harness installation. For necessary preliminary tasks, refer to ISTA and perform the following steps listed in this document.

NHTSA · نشرة المصنع10149498معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
زد 4 (E89) · 2009–2016
نشرةمتوسطالكهرباءNA

نشرة

"N54 - Diagnosis of Cold Start Rough Running with Misfire Faults. The customer may complain that during the cold start in the morning, the engine runs very roughly and the Service Engine Soon lamp is illuminated. Various misfire fault codes (e.g., 29CC, 29D2, 29D1, 29D0, 29C0, 29CF) may be stored in the DME control module. The engine rough running complaint can be reproduced on a cold start in the workshop. During the course of diagnosis, the spark plugs, removed from the misfiring cylinders after the problem was reproduced, are found to be soaked (""wet"") with fuel, while the injector tips are covered with a layer of carbon deposit. Possible cause: high-pressure injector failure (leakage or incorrect spraying pattern) due to internal wear or unfavorable stock of tolerances IMPORTANT: For comprehensive N54 drivability diagnostics, always refer to the ""N54 Engine Diagnostic Fault Tree"" file (the current version ""02_14_13"" is found as a PDF attachment to SI B12 55 06)."

NHTSA · نشرة المصنع10149429سنوات الطراز 2009معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
زد 4 (E89) · 2009–2016
نشرةمتوسطالكهرباءNA

نشرة

N63: Proper Ignition Harness Installation and Ground Connections. INFORMATION https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/16511.1.B12241... 10/14/2014 Page 2 of 2 Any consecutive damage to the BSD interface components (DME, alternator voltage regulator, QLT sensor) caused by incorrect reinstallation of the ignition harness is not covered under the BMW New Vehicle /SAV Limited Warranty.

NHTSA · نشرة المصنع10148021معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
زد 4 (E89) · 2009–2016
نشرةمتوسطالكهرباءNA

نشرة

## متطلبات صيانة البطارية: العناية بالبطارية تُعدّ الصيانة السليمة للبطارية أمراً حيوياً عندما تكون مركبات BMW ضمن مخزون مركزك. إن السماح لجهد بطارية المركبة بالانخفاض دون 12.0 فولت (12.0V) يقلل بشكل دائم من العمر الافتراضي للبطارية، وقد يؤدي إلى تعطلها المبكر. أما بالنسبة للمركبات المزودة ببطارية الجهد العالي (المركبات الهجينة/الكهربائية)، فإن الإخفاق في صيانة هذه البطارية بشكل صحيح قد يؤدي إلى تفريغ كبير لبطارية الجهد العالي (HV)، ما يستلزم استبدالها. نوفر نظام صيانة مرناً للبطاريات يمكن لكل مركز BMW استخدامه بما يتوافق مع احتياجاته الخاصة. تشرح هذه النشرة تقويم شحن البطارية (انظر المرفق)، وأنظمة الشحن، وإجراء أداة مبسط وفحص جهد البطارية أدناه.

NHTSA · نشرة المصنع10148035ترجمة آلية · اللغة الأصلية: الإنجليزيةعرض التفاصيل →
زد 4 (E89) · 2009–2016
نشرةمتوسطالكهرباءNA

نشرة

BMW Parts Bulletin TEC9V Fuel Tank / Level Sensor Returns BMW AG has requested an inspection of the following part numbers: 16 11 7 268 031, 16 11 7 268 032 and 16 11 7 297 340 Stock should not be sold or installed on any vehicle. 16 11 7 268 031 and 16 11 7 268 032 All fuel tanks produced before 05/30/2014 needs to be returned. All parts with later dates of production are ok and can be used. 16 11 7 297 340 All level sensors produced in Poland before 05/19/2014 (date is shown as day 139 of year 14 on the part) need to be returned. Those produced after this date are ok and can be used. All level sensors produced in Brazil currently in dealer inventory need to be returned. Please return all part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC9V must appear in the text of your TEC claim. TEC9V is valid from September 24, 2014, through October 08, 2014. The deadline for filing a claim under TEC9V is October 08, 2014. All parts must be returned to your facing RDC no later than October 22, 2014. Please re-order the same part numbers as needed. (c) 2014, BMW of North America, LLC. The contents of this document are confidential and should not be shared with third parties for distribution. Page 2 / 2 Made in Poland Made in Brazil Need to be returned (c) 2014, BMW of North America, LLC. The contents of this document are confidential and should not be shared with third parties for distribution.

NHTSA · نشرة المصنع10148044معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
زد 4 (E89) · 2009–2016
نشرةمتوسطالكهرباءNA

نشرة

BMW Parts Bulletin TEC3W Leak Diagnosis Module Return BMW AG has requested a return of the following part numbers: 16 13 7 315 813 and 16 13 7 274 147 Stock should not be sold or installed on any vehicle. Leak Diagnosis Module part number 16 13 7 315 813 must be returned. Please reorder new part number 16 13 7 333 302 as needed. Pressure Switch, Leak Diagnosis Module part number 16 13 7 274 147 must also be returned. Please reorder new part number 16 13 7 333 301 as needed. Please return all part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC3W must appear in the text of your TEC claim. TEC3W is valid from September 04, 2014, through September 18, 2014. The deadline for filing a claim under TEC3W is September 18, 2014. All parts must be returned to your facing RDC no later than October 02, 2014.

NHTSA · نشرة المصنع10148045معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
زد 4 (E89) · 2009–2016
نشرةمتوسطالكهرباءNA

نشرة

BMW Parts Bulletin TEC1U RDC Module Return BMW AG has requested an inspection of the following part numbers: 36 10 6 798 872 and 36 10 6 856 227 Stock should not be sold or installed on any vehicle. All parts with a date of and from 26/07/13 (July 26, 2013) are good. All parts with a date prior to 26/7/13 (July 26, 2013) must be returned to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC1U must appear in the text of your TEC claim. TEC1U is valid from March 5, 2014, through March 19, 2014.The deadline for filing a claim under TEC1U is March 19, 2014. All parts must be returned to your facing RDC no later than April 2, 2014. Please re-order the same part number as needed. (c) 2014, BMW of North America, LLC. The contents of this document are confidential and should not be shared with third parties for distribution.

NHTSA · نشرة المصنع10148013معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
زد 4 (E89) · 2009–2016
نشرةمتوسطالكهرباءNA

نشرة

TEC9T Return, Battery AGM. BMW AG has requested an inspection and return of affected batteries with the following part number: 61 21 8 520 153: Battery AGM Please inspect your stock of this battery. Batteries with finish code label E3, F3, G3, H3, I3, J3 and K3 should not be sold or installed on any motorcycle and must be held for scrapping by your ACM or FSE.

NHTSA · نشرة المصنع10147993معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
زد 4 (E89) · 2009–2016
نشرةمتوسطالكهرباءNA

نشرة

Closed-circuit Current Measurement. Increased closed-circuit currents may occur permanently or intermittently, and may cause the battery to discharge prematurely. The increase in closed-circuit current may be caused by a faulty control unit, or by the installation of a non-approved accessory. In a situation where a vehicle has broken down due to a discharged battery, for diagnostic purposes it is important not to disconnect the battery. This is because a control unit will be reset if the battery is disconnected. Following a reset, the faulty control unit may start functioning correctly again, making accurate diagnosis impossible. To correctly measure closed-circuit current, the 50-amp clip-on probe (previously used with the IMIB) or the 100-amp clip-on probe can now be used in conjunction with the IMIB (Integrated Measurement Interface Box) to properly diagnose closed-circuit current problems over an extended period of time. Connect the amp clip-on probe directly to the IMIB Measurement input 3 (green socket).

NHTSA · نشرة المصنع10147940معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
زد 4 (E89) · 2009–2016
نشرةمتوسطالكهرباءNA

نشرة

?Delivery Stop ? Natural Vacuum Leak Detection Temperature Sensor. A Delivery Stop has been issued on 6 Series Gran Coupe (F06), 5 Series Sedan (F10), 6 Series Convertible (F12), 6 Series Coupe (F13), and 7 Series (G12) vehicles produced from November 3, 2015 to November 5, 2015. These vehicles may have the incorrect Natural Vacuum Leak Detection (NVLD) temperature sensor installed. Please reference SI B16 09 15 (attached) for additional information. Please be reminded that it is a violation of Federal law for you to sell, lease or deliver any vehicle covered by this notification until the delivery stop repair has been performed. This means that centers may not legally deliver new motor vehicles to a consumer until it is fixed or use/sell replacement equipment/parts subject to a delivery stop. Note also that substantial civil penalties apply to violations of this law. Also, you should not sell, lease or deliver any Certified Pre-Owned or used vehicles subject to a delivery stop until the repair is completed.

NHTSA · نشرة المصنع10147892معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
زد 4 (E89) · 2009–2016
نشرةمتوسطالكهرباءNA

نشرة

losed-circuit Current Measurement. Closed circuit current needs to be measured. Excessive closed-circuit currents may occur continuously or intermittently, and may cause the battery to discharge prematurely. CAUSE The increase in closed-circuit current may be caused by a faulty control unit, or by the installation of a non-approved accessory. INFORMATION In a situation where a vehicle has broken down due to a discharged battery, for diagnostic purposes it is important to not disconnect the battery. This is because a control unit will be reset if the battery is disconnected. Following a reset, the faulty control unit may start functioning correctly again, making accurate diagnosis impossible. To correctly measure closed-circuit current, the 50-amp clip-on probe (previously used with the IMIB) or the 100-amp clip-on probe can now be used in conjunction with the IMIB (Integrated Measurement Interface Box) to properly diagnose closed-circuit current problems over an extended period of time. Connect the amp clip-on probe directly to the IMIB Measurement input 3 (green socket).

NHTSA · نشرة المصنع10147825معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
زد 4 (E89) · 2009–2016
نشرةمتوسطالكهرباءNA

نشرة

Battery Maintenance Requirements: Battery Care. Proper battery maintenance is vital when BMW vehicles are in your center's inventory. Allowing a vehicle's battery voltage to drop below 12.0 volts (12.0V) permanently reduces the battery life expectancy and can lead to premature failure of the battery. For vehicles, equipped with a highvoltage battery (hybrid/electric vehicles), failure to properly maintain this battery may lead to a greatly discharged HV battery, requiring replacement. We provide a flexible battery maintenance system every BMW center can use to meet their particular needs. This bulletin explains the Battery Charging Calendar (see attachment), charging system categories and a simplified tool and battery voltage checking procedure below. INFORMATION To transition the reimbursement of the battery maintenance step from the QCI to the new Battery Care Program described in the procedure section, a reduction in the QCI time allowances was necessary. For more information on the updated QCI payment and the related claim submission information, please refer to SI B01 01 08. Your center will received a separate payment for properly maintaining batteries on in-stock vehicles.

NHTSA · نشرة المصنع10147826معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
زد 4 (E89) · 2009–2016
نشرةمتوسطالكهرباءNA

نشرة

The Engine Intermittently Loses Power. Intermittently the engine may experience a loss of power along with a Drivetrain Malfunction message. The Service Engine Soon light (MIL) may also be illuminated. There are one or more of the following air mass plausibility and Valvetronic system faults stored in the DME memory: E-series with BN2000 ? 2775 - Air mass, plausibility: Air mass too low ? 2C57 - Charging pressure control, plausibility: Pressure too low ? 2DCE - Valvetronic system: No adjustment possible F-series with BN2020 ? 102002 - Air mass, plausibility: Air mass too low ? 120308 - Charging pressure control, plausibility: Pressure too low ? 133B04 - Valvetronic system: No adjustment possible CAUSE ? Defective Valvetronic component ? Erroneous faults set due to DME software parameters

NHTSA · نشرة المصنع10147814معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
زد 4 (E89) · 2009–2016
نشرةمتوسطالكهرباءNA

نشرة

"ISPI NEXT ISTA 3.44 introduces a new concept for displaying repair instructions. The new repair instructions have the following advantages compared to the old style: z All instructions (preliminary and follow-up) needed for the repair are included; hyperlinks are no longer needed. z All special tools needed for the repair can be viewed or printed from one tab in ISTA without leaving the repair instructions page. z All technical data and torque specs for the repair can be viewed from one tab in ISTA without leaving the repair instructions page. The most commonly used instructions have been converted to this new format (including repair instructions for the N63 Customer Care Package), and are listed below. Use these instructions instead of the old format. They will save you time and ensure a better quality repair. The Premium instructions can be found in ISTA with a text search for ""Premium."" 1. 1131052 - Replace both timing chains\PREMIUM (N63) 2. 1166000 - Remove and install or replacing vacuum pump\PREMIUM (N63) 3. 1362561 - Removing and installing or replacing both air-mass meters\PREMIUM (N63) 4. 1371190 - Removing and installing/replacing left clean air pipe\PREMIUM (N63) 5. 1371195 - Removing and installing/replacing right clean air pipe\PREMIUM (N63) 6. 1165025 - Removing and installing/replacing right exhaust turbocharger, right\PREMIUM (N63) 7. 1165030 - Removing and installing/replacing left exhaust turbocharger\PREMIUM (N63) 8. 1115001 - Replacing all engine ventilation lines and connection lines\PREMIUM (N63) 9. 1353332 - Replacing fuel feed line\PREMIUM (N63) 10. 1353315 - Removing and installing or replacing all injectors in the fuel injection system\PREMIUM (N63) 11. 5116165 - E70 Completely remove and install the centre console\PREMIUM 12. 6451591 - E90 Removing and installing/renewing evaporator\PREMIUM 13. 1136046 - E90 Removing and installing or replacing intake and exhaust camshaft adjusters\PREMIUM (N55) 14. 1112100 - E90 Removing and install

NHTSA · نشرة المصنع10147066معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
الأقدم →

المصادر: NHTSA (الولايات المتحدة، ملك عام)، وزارة النقل الكندية (رخصة الحكومة المفتوحة – كندا)، DVSA (المملكة المتحدة، رخصة الحكومة المفتوحة 3.0)، RappelConso وSafety Gate الأوروبي (فرنسا، الرخصة المفتوحة 2.0)، ووزارة MLIT اليابانية (رخصة البيانات العامة 1.0)، ووزارة MOLIT الكورية (car.go.kr).