نشرة
Product Emission Recall - Incorrrect Heated Oxygen Senfsor Installed
🔔 أنشئ حسابًا مجانيًا لتلقي تنبيهات البريد عن Buick Encore I
النشرات الفنية (TSB) تعليمات إصلاح يرسلها المصنعون إلى وكلائهم بشأن مشكلات معروفة. ليست استدعاءات سلامة، لكنها كثيرًا ما تؤكد وجود عطل.
Product Emission Recall - Incorrrect Heated Oxygen Senfsor Installed
This Bulletin Provides Information for Repairing Engine Front Cover Oil Leak, Sealing Surface Preparation and Applying RTV Sealant.
43210-01 - Service Update. Part Number Revised. Engine oil leakage at the oil cooler pipe caused by damaged O-ring.
This preliminary information bulletin provides Tips on Front Cover Oil Leak Condition.
43210 - Service Update. Stop Delivery Order. For vehicles equipped with a 1.4L Turbo Engine, certain of these vehicles may experience engine oil leakage at the oil cooler pipe caused by a damaged O-ring. Dealers are to replace the damaged O-Ring.
This Preliminary Information communication provides information to the technician about vehicles that have oil consumption or blue smoke from the exhaust. Technician will need to inspect the engine oil level and inspect the positive crankcase ventilation hoses, turbo housing, spark plugs, cylinders, intake manifold and air ducts for signs of excessive oil. Technician will also need to follow the latest versions of PI0552 and PIP4925. Technician will need to remove all pistons and inspect ring condition and for cracks between the number 1 and 2 compression ring lands, if no air leaks are found. If cracked piston ring lands are found, then inspect the cylinder head to determine first or second design. Technician will need to replace the cylinder head if it is the 1st design. Also the pistons rings will need to be placed.
43210 - service update. For vehicles equipped with a 1.4l turbo engine (rpo luj/luv), certain of these vehicles may experience engine oil leakage at the oil cooler pipe caused by a damaged o-ring. Dealers are to replace the damaged o-ring.
This Preliminary Information Communicates a Remote Vehicle Start is inoperative condition. Engineering is aware of the issue and is currently researching the concern. This PI will be updated when a solution is available.
This preliminary informational bulletin provides a revision to update the model information and information under Oil Pump Assembly.
This informational bulletin provides information on the proper oils to use on GM vehicles including information regarding the differences of the Dexos oils.
This informational bulletin supplies infomation for identifying non-GM (Aftermarket) engine calibrations for gasoline engines using Tech 2 or GDS 2 (U.S. and Canada).
The PI was created to advise of an engineering investigation for a concern of unable to connect toOnStar Virtual Advisor when selecting "New Destination" in the OnStar menu.
This technical bulletin provides information on Engine Oils Used in 2014 Model Year Vehicles
This Preliminary information communicates of the left side blind zone indicator comes on randomly with no objects present that engineering is currently working on the issue and that the PI will be updated with a repair is available.
This informational bulletin provides information on Identifying Non-GM (Aftermarket) Engine Calibrations for Gasoline Engines Using Tech 2 or GDS 2
This informational bulletin provides information on the proper oils to use on GM vehicles including information regarding the differences of the Dexos oils.
This preliminary information bulletin provides information for replacement oil pressure switches.
This Preliminary Information communication provides information to the technician about vehicles that have that the fuel gauge is operational but will not go past 7/8 full after filling the gas tank. Technician will need to remove the Fuel Tank and inspect for the float arm contacting the plastic evaporative vent tube inside the fuel tank, reposition and secure the tube away from the level sender using a zip tie.
This informational bulletin provides information on Identifying Non-GM (Aftermarket) Engine Calibrations for Gasoline Engines Using Tech 2 or GDS 2 (U.S. and Canada)
This preliminary information communication advises the technician that the 2016 buick encore 1.4l regular production option code le2 engine was placed on the exchange program. Dealer will need to call general motors product quality center for further assistance.
This preliminary information communication advises the technician that engineering is working on the map update and has a tentative release date around the 4th quarter of 2016 to the 1st quarter of 2017.
This preliminary information communication advises the technician that the engine exchange program on vehicles equipped with engine regular production option code le2 has ended. This engine can now be ordered through the regular general motors customer care and aftersales parts process or product quality center process for required dealers.
This preliminary information communication advises the technician upper oil pan and lower oil pan product quality center part restriction has ended. These parts can now be ordered through the regular general motors customer care and aftersales parts process or product quality center process for required dealers.
This preliminary information communication advises the technician that the upper and lower oil pan will be placed on product quality center part restriction. Dealer will need to call general motors product quality center for assistance.
This preliminary information communication advises the technician that engineering is working on the map update and has a tentative release date around the 4th quarter of 2016 to the 1st quarter of 2017.
المصادر: NHTSA (الولايات المتحدة، ملك عام)، وزارة النقل الكندية (رخصة الحكومة المفتوحة – كندا)، DVSA (المملكة المتحدة، رخصة الحكومة المفتوحة 3.0)، RappelConso وSafety Gate الأوروبي (فرنسا، الرخصة المفتوحة 2.0)، ووزارة MLIT اليابانية (رخصة البيانات العامة 1.0)، ووزارة MOLIT الكورية (car.go.kr).