Crack may occur witin a capacitor inside the camshaft position sensor
The Camshaft position sensor may overheat causing the engine management warning light to illuminate and in the worst case a localised thermal incident may occur
🔔 أنشئ حسابًا مجانيًا لتلقي تنبيهات البريد عن Daewoo لانوس (كل الأجيال)
The Camshaft position sensor may overheat causing the engine management warning light to illuminate and in the worst case a localised thermal incident may occur
On certain vehicles, the ECM wiring harness which is located in the passenger footwell area may chafe against a caulked body seam due to movement of the passenger's feet and result in a short circuit to ground. There is a possibility that engine driveablity may be affected and/or the engine may stall. Correction: Extra protection will be applied to the wiring harness and an additional tie strap will be installed to reroute the ECM harness away from the body seam.
Vehicle description: Passenger vehicles. A wiring harness, located beneath the carpet in the front passenger floor area, can become damaged by passenger traffic as the wire harness is rubbed against a body seam in the floor panel.
Vehicle description: Passenger vehicles. A wiring harness, located beneath the carpet in the front passenger floor area, can become damaged by passenger traffic as the wire harness is rubbed against a body seam in the floor panel.
المصادر: NHTSA (الولايات المتحدة، ملك عام)، وزارة النقل الكندية (رخصة الحكومة المفتوحة – كندا)، DVSA (المملكة المتحدة، رخصة الحكومة المفتوحة 3.0)، RappelConso وSafety Gate الأوروبي (فرنسا، الرخصة المفتوحة 2.0)، ووزارة MLIT اليابانية (رخصة البيانات العامة 1.0)، ووزارة MOLIT الكورية (car.go.kr).