**وصف القطعة:** 5.7 لتر Long Block
**وصف المشكلة:** تركيب الـ 5.7 لتر Long Block Assembly متوافق مع تطبيقات EGR وغير EGR. يجب طلب لوحة الإغلاق لنظام EGR (EGR Block-Off Plate) رقم 53032739AA عند تركيب هذا الـ Long Block Assembly في تطبيق غير EGR، ما لم تكن لوحة الإغلاق لنظام EGR منقولة من المحرك القديم.
Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 Nm [21 ft. lbs.].
NHTSA · نشرة المصنع10223854سنوات الطراز 2005معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
**وصف القطعة:** كتلة المحرك الطويلة 5.7L
**وصف المشكلة:** تجميعة الكتلة الطويلة 5.7L هذه متوافقة مع تطبيقات EGR وتطبيقات Non-EGR. يجب طلب لوحة سد EGR (53032739AA) عند تركيب تجميعة الكتلة الطويلة هذه في تطبيق Non-EGR، إلا إذا كانت لوحة سد EGR منقولة من المحرك القديم.
المصادر: NHTSA (الولايات المتحدة، ملك عام)، وزارة النقل الكندية (رخصة الحكومة المفتوحة – كندا)، DVSA (المملكة المتحدة، رخصة الحكومة المفتوحة 3.0)، RappelConso وSafety Gate الأوروبي (فرنسا، الرخصة المفتوحة 2.0)، ووزارة MLIT اليابانية (رخصة البيانات العامة 1.0)، ووزارة MOLIT الكورية (car.go.kr).