Some vehicles may exhibit a rattle noise and/or exhaust leaking noise from the rear of the vehicle. The noise may be caused by a gap between the exhaust hanger bracket and flange, which allows moisture containing road salt to enter and cause the exhaust studs to rust and possibly break off.The welding location of the exhaust hanger bracket and flange has been changed during vehicle production to ensure the hanger bracket and flange are flush, with no gaps that could allow intrusion of moisture containing road salt.The purpose of this bulletin is to cut and clean the welding location of the exhaust hanger bracket and re-attach it, so the hanger bracket and flange are flush with no gaps, to prevent intrusion of moisture containing road salt.
NHTSA · نشرة المصنع10097299سنوات الطراز 2010معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
**مازدا: ضوضاء توقيت الصمامات المتغير (vvt) عند بدء تشغيل المحرك**
عند تشغيل المحرك لأول مرة، قد تُصدر بعض المركبات طقطقة عالية من نظام توقيت الصمامات المتغير (vvt) (a). ويحدث ذلك بسبب عدم انغلاق المسمار القفلي لمحرك توقيت الصمامات المتغير بشكل كامل، أو بسبب تآكل فتحة المسمار القفلي.
*pe تم التحديث بتاريخ 06/08/2011. *kb
المصادر: NHTSA (الولايات المتحدة، ملك عام)، وزارة النقل الكندية (رخصة الحكومة المفتوحة – كندا)، DVSA (المملكة المتحدة، رخصة الحكومة المفتوحة 3.0)، RappelConso وSafety Gate الأوروبي (فرنسا، الرخصة المفتوحة 2.0)، ووزارة MLIT اليابانية (رخصة البيانات العامة 1.0)، ووزارة MOLIT الكورية (car.go.kr).