Some vehicles may exhibit an interference between the front (1) and the rear door bright window glass molding (2) due to the bright window glass molding shifting backward when opening/closing the front door. This is caused by an inappropriate position of the positioning tab on the front door glass run-channel. To eliminate this concern, double-sided tape has been added to the front door glass run-channel, and the shape of the rear end of the front door glass run-channel has been modified to prevent the bright window glass molding from shifting. Customers having this concern should have their vehicle repaired using the following repair procedure. REPAIR PROCEDURE 1. Verify the customer concern. 2. Replace the front glass run-channel(s) with a modified one(s) according to the instructions in MGSS (FRONT DOOR GLASS RUN-CHANNEL REMOVAL/INSTALLATION). NOTE: Repair only the side with the issue. ATTENTION: Removing the front beltline moldings is unnecessary for this repair procedure when replacing the front door glass run-channel. 3. Verify the repair.
NANHTSA · نشرة المصنع11030601
النشرات الفنية
معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظار
يشمل: Mazda CX-90 (سنوات الطراز 2024)
المصادر: NHTSA (الولايات المتحدة، ملك عام)، وزارة النقل الكندية (رخصة الحكومة المفتوحة – كندا)، DVSA (المملكة المتحدة، رخصة الحكومة المفتوحة 3.0)، RappelConso وSafety Gate الأوروبي (فرنسا، الرخصة المفتوحة 2.0)، ووزارة MLIT اليابانية (رخصة البيانات العامة 1.0)، ووزارة MOLIT الكورية (car.go.kr).