Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle exhibit/set SYMPTOM: one or more of the following Diagnostic Trouble Codes (DTCs): P219A - Bank 1 Air-Fuel Ratio Imbalance. P219B - Bank 2 Air-fuel Ratio Imbalance. P032F - Combustion Engine Producing Insufficient Torque. NOTE: This revision has an updated and more effective fix for DTC P219B than the prior version. Customers may experience one or more of the following: **Power Take Off (PTO) may cancel during engagement with high PTO loads.** Engine speed surging, unstable, hunting, or oscillating while coasting at low vehicle speeds. Stationary Idle PTO feature is not activating when the user configuration is selected to require parking brake be set (DD/DP Only). PTO not auto-resuming after hard-wired remote start (DD/DP Only). Driveline clunk or bump when coasting to a stop in cruise control mode. Engine idle undershoot or delayed response with power steering input. In addition, the following software enhancement(s) is available: Increase the duration that PTO related messages are displayed on the Instrument Panel Cluster (IPC) (DD/DP Only). This bulletin involves reprogramming the PCM with the latest available software.
NANHTSA · نشرة المصنع11035974
النشرات الفنية
معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظار
يشمل: Dodge Ram IV (2009) (سنوات الطراز 2025)
المصادر: NHTSA (الولايات المتحدة، ملك عام)، وزارة النقل الكندية (رخصة الحكومة المفتوحة – كندا)، DVSA (المملكة المتحدة، رخصة الحكومة المفتوحة 3.0)، RappelConso وSafety Gate الأوروبي (فرنسا، الرخصة المفتوحة 2.0)، ووزارة MLIT اليابانية (رخصة البيانات العامة 1.0)، ووزارة MOLIT الكورية (car.go.kr).