قراءة مجانية · حساب مجاني للمساهمةخليفة Anticars (2000)
تسجيل الدخولإنشاء حساب
NANHTSA · نشرة المصنع11039102

النشرات الفنية

معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظار

Complaint While driving, engine speed may increase with accelerator pedal input while vehicle acceleration remains limited with no torque transfer to the wheels 4th gear may remain displayed in the instrument cluster after the condition occurs, including when the vehicle has come to a standstill. Cycling the ignition may restore normal transmission operation. No related fault code or warning message may be stored. Cause During extended periods of steady driving in 4th gear, a preventative flushing routine of the Mux2P valve may be performed in the transmission valve body. If 3rd gear is requested shortly afterward, the pressure within the Mux2P oil channel may not yet have fully reduced. Under these conditions, the transmission control unit may detect an implausible shift actuator movement. As a protective measure, the transmission control unit may temporarily shift the transmission into neutral. As a result, 4th gear may continue to be displayed in the instrument cluster even after the vehicle has come to a standstill. Remedy Please perform the following: 1. Update software TCM8FDCT_PT4 transmission control unit

يشمل: Mercedes-Benz A-Class IV (W177) (سنوات الطراز 2020) · Mercedes-Benz GLB-Class I (سنوات الطراز 2026)

الإشعار الرسمي ↗

المصادر: NHTSA (الولايات المتحدة، ملك عام)، وزارة النقل الكندية (رخصة الحكومة المفتوحة – كندا)، DVSA (المملكة المتحدة، رخصة الحكومة المفتوحة 3.0)، RappelConso وSafety Gate الأوروبي (فرنسا، الرخصة المفتوحة 2.0)، ووزارة MLIT اليابانية (رخصة البيانات العامة 1.0)، ووزارة MOLIT الكورية (car.go.kr).