قراءة مجانية · حساب مجاني للمساهمةخليفة Anticars (2000)
تسجيل الدخولإنشاء حساب
UKDVSA · المملكة المتحدةR/2024/21922 مايو 2024

Checking high-voltage battery

معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظار

Deviations to various important parameters were discovered on the affected battery modules. These may result in the affected battery modules becoming defective over the course of the vehicle’s service life. In turn this represents a fire hazard with the associated risk of severe or fatal injuries to people inside and/or outside the vehicle as well as significant material damage.

الحل: Check and if necessary replace individual modules of the high-voltage battery. To minimise this risk the manufacturer advises that you limit the charging target to 80 percent capacity until the inspection has been carried out. This significantly reduces the load on the battery during charging. You can adjust this setting in the Charging target menu in the MMI or in the ’myAudi’ app. As this setting may change during vehicle use the current value must always be checked prior to charging the vehicle and set to a maximum of 80 percent if necessary. Additionally until the inspection has been completed the manufacturer advises not to charge the vehicle under cover and or to ensure the vehicle is not parked adjacent to or under buildings.

يشمل: Audi Q8 e-tron (سنوات الطراز 2022–2023)

الإشعار الرسمي ↗

المصادر: NHTSA (الولايات المتحدة، ملك عام)، وزارة النقل الكندية (رخصة الحكومة المفتوحة – كندا)، DVSA (المملكة المتحدة، رخصة الحكومة المفتوحة 3.0)، RappelConso وSafety Gate الأوروبي (فرنسا، الرخصة المفتوحة 2.0)، ووزارة MLIT اليابانية (رخصة البيانات العامة 1.0)، ووزارة MOLIT الكورية (car.go.kr).