قراءة مجانية · حساب مجاني للمساهمةخليفة Anticars (2000)
تسجيل الدخولإنشاء حساب
NANHTSA · الولايات المتحدة00V34000024 أكتوبر 2000

Power train:Clutch assembly

معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظار

Vehicle description: Passenger vehicles. The starter ring gear, which is attached to the clutch assembly with three mounting screws, could become separated from the clutch assembly. This possible failure could be caused by (1) the fracture of the starter ring gear itself at the mounting holes due to an incorrect positioning of the mounting holes, or (2) by the failure of the mounting screws. If either of these conditions would occur, the result would be fragments of the starter ring gear being thrown from the clutch area.

الخطر: If these fragments came into contact with the vehicle's tire, a puncture could occur resulting in loss of vehicle control.

الحل: Dealers will (1) replace the starter ring gear mounting screws and measuring the starter ring gear mounting holes. The measurement of the starter ring gear will determine if the correct position of the mounting holes exists and if the position is incorrect, the starter ring gear will also be replaced; or (2) replace the starter ring gear with a new ring gear having the correctly positioned mounting holes and the replacement of the mounting screws.

يشمل: Ferrari 360 (سنوات الطراز 1999–2000)

الإشعار الرسمي ↗

المصادر: NHTSA (الولايات المتحدة، ملك عام)، وزارة النقل الكندية (رخصة الحكومة المفتوحة – كندا)، DVSA (المملكة المتحدة، رخصة الحكومة المفتوحة 3.0)، RappelConso وSafety Gate الأوروبي (فرنسا، الرخصة المفتوحة 2.0)، ووزارة MLIT اليابانية (رخصة البيانات العامة 1.0)، ووزارة MOLIT الكورية (car.go.kr).