قراءة مجانية · حساب مجاني للمساهمةخليفة Anticars (2000)
تسجيل الدخولإنشاء حساب
NANHTSA · نشرة المصنع10091623

النشرات الفنية

معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظار

Some vehicles may exhibit a lack of power and/or misfires during pdi. This may be due to a low fuel level in the fuel tank. Verify there is at least a tank of fuel in the tank. If not, fill to tank, start the engine and drive the vehicle for a minimum of 1 mile to purge any air remaining in the fuel system, then re-test. Note: Fill the fuel tank with adequate fuel ( tank or more) prior to driving the vehicle to exit delivery mode. Continuing to drive the vehicle with very low fuel levels may cause damage to the fuel pump.If the concern is resolved by adding fuel, do not contact the technical assistance hotline or create a pqm alert. If the concern is not resolved by adding fuel, contact the technical assistance hotline.

يشمل: Mazda CX-9 II (2013) (سنوات الطراز 2016)

الإشعار الرسمي ↗

المصادر: NHTSA (الولايات المتحدة، ملك عام)، وزارة النقل الكندية (رخصة الحكومة المفتوحة – كندا)، DVSA (المملكة المتحدة، رخصة الحكومة المفتوحة 3.0)، RappelConso وSafety Gate الأوروبي (فرنسا، الرخصة المفتوحة 2.0)، ووزارة MLIT اليابانية (رخصة البيانات العامة 1.0)، ووزارة MOLIT الكورية (car.go.kr).