قراءة مجانية · حساب مجاني للمساهمةخليفة Anticars (2000)

Porsche 944

1982–1991 · 1 الأجيال · 2 أعطال موثّقة · 2 أسواق
الأجيال
كل الأجيال9441982–19912158
سنة الطراز
السوقالكلJPNA
استدعاءحرجالمحركNA

Fuel System

The short section of high pressure fuel hose between the fuel rail and the fuel pressure regulator, which runs alongside the intake manifold, may be subject to hardening. In the event that this line does harden, fuel leaks could develop between the hose and metal pipe fittings. Leaking fuel could ignite on the hot exhaust system and lead to an engine compartment fire. Correction: Fuel hose will be replaced on 924s, 944 and 944 turbo vehicles and the fuel hose and fuel rail will be replaced on 944s vehicles.

وزارة النقل الكندية4 أبريل 19901990051سنوات الطراز 1985–1988معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
استدعاءحرجالمحركNA

Fuel system, gasoline:Fuel injection system:Fuel rail

The hose material used in the short section of the high pressure fuel line hose, between the fuel rail and fuel pressure regulator, is subject to hardening, and could cause fuel leaks between the hose and the metal pipe fittings.

NHTSA · الولايات المتحدة2 أبريل 199090V061000سنوات الطراز 1985–1988معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
استدعاءحرجالمحركNA

Fuel system, gasoline:Delivery:Hoses, lines/piping, and fittings

The protective sleeve covering of the return fuel hose between the pressure regulator and fuel return pipe was shortened leaving part of the hose exposed. In some instances this part of the hose becomes kinked due to the engine compartment heat and/or the routing of the hose. Consequence of defect: If this occurs it could restrict and damage the return fuel hose which could lead to fuel leakage and cause an engine compartment fire.

NHTSA · الولايات المتحدة12 يونيو 198686V077000سنوات الطراز 1986معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
استدعاءحرجالمحركNA

Fuel system, gasoline:Delivery:Hoses, lines/piping, and fittings

Fuel hose may be damaged due to too much pressure in crimping the hose end fitting. Consequence of defect: A fuel leak could develop which could cause a loss in system pressure and engine stalling. Also, fuel vapors in the engine compartment could be ignited by a spark and cause a fire.

NHTSA · الولايات المتحدة9 أبريل 198585V039000سنوات الطراز 1985معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →
استدعاءمتوسطالمحركNA

استدعاء

The fuel supply hose to the pressure damper in the engine compartment may develop a leak between the flex hose and the threaded connector due to improper crimping of the fitting. This will cause the fuel pressure in the injection system to drop, resulting in engine stalling. A stalled vehicle could pose a threat to traffic safety.

وزارة النقل الكندية12 أبريل 19851985040سنوات الطراز 1985معروض باللغة الأصلية (الإنجليزية) · الترجمة قيد الانتظارعرض التفاصيل →

المصادر: NHTSA (الولايات المتحدة، ملك عام)، وزارة النقل الكندية (رخصة الحكومة المفتوحة – كندا)، DVSA (المملكة المتحدة، رخصة الحكومة المفتوحة 3.0)، RappelConso وSafety Gate الأوروبي (فرنسا، الرخصة المفتوحة 2.0)، ووزارة MLIT اليابانية (رخصة البيانات العامة 1.0)، ووزارة MOLIT الكورية (car.go.kr).