Bulletin
This bulletin provides information when the fuel tank cap seal is leaking; DTC P044200, P045600 and/ or P00EF00 in stored in the ECM.
🔔 Kostenloses Konto anlegen und Benachrichtigungen zu Audi e-tron (alle generationen) erhalten
Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
This bulletin provides information when the fuel tank cap seal is leaking; DTC P044200, P045600 and/ or P00EF00 in stored in the ECM.
This bulletin provides information when the fuel tank cap seal is leaking; DTC P044200, P045600 and/ or P00EF00 in stored in the ECM.
G13 coolant was mistakenly filled into the affected vehicles instead of G12evo coolant during a workshop visit. In certain circumstances, this could result in a cooling system leak.
G13 coolant was mistakenly filled into the affected vehicles instead of G12evo coolant during a workshop visit. In certain circumstances, this could result in a cooling system leak.
This bulletin provides information when the ignition cannot be switched on, DTC "U043100" or "U014100" stored in gateway (DA0019).
This bulletin provides information when there is an engine start system warning, or power unit start system warning, B200047.
This bulletin provides information when there is an engine start system warning, or power unit start system warning, B200047.
This bulletin provides information when there is an Engine Start system warning or Power unit start system warning, B200047.
This bulletin provides information for when there is an Engine Start system warning, or Power Unit start system warning, B200047.
This bulletin contains instructions for when to add gasoline additives for cleaning the injectors.
A highly sporadic startup timing issue can cause a message "CNG inspection Due! CNG Mode not available. Please contact workshop". This is a normal condition which can be resolved by recycling the ignition and repairs are not needed.
A highly sporadic startup timing issue can cause a message "CNG inspection Due! CNG Mode not available. Please contact workshop". This is a normal condition which can be resolved by recycling the ignition and repairs are not needed.
This technical service bulletin reminds the reader to check for metal debris when replacing an engine.
This bulletin contains a OBD adapation that addresses an oil service in a vehicle that doesn't have oil.
Removed the Note reference at the beginning of the chart that referenced oil change and air filter change, as it doesn't have either.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).