Bulletin
This bulletin provides informaiton when there is a yellow battery warning lamp; DTC P0A1F00.
🔔 Kostenloses Konto anlegen und Benachrichtigungen zu Audi S4 (alle generationen) erhalten
Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
This bulletin provides informaiton when there is a yellow battery warning lamp; DTC P0A1F00.
This TSB provides information on a gateway softare update; yellow battery warning lamp + DTC P0A1F00.
This Pending Service Solution (PSS) reqests that technicians create a record in the PSS database in instances when the yellow battery warning lamp is illuminated; P0A1F00.
This Pending Service Solution (PSS) reqests that technicians create a record in the PSS database in instances when the yellow battery warning lamp is illuminated; P0A1F00.
This bulletin provides information when the exhaust warning light is illuminated; engine starter relay test plan DTC P000000.
This bulletin provides information for when there is an exhaust warning light; DTC P000000 engine starter relay test plan.
This bulletin contains repair information for a yellow SOS warning lamp and DTCs B105313 and B153313.
Software Installation Instructions.
Software Installation Instructions.
Red oil pressure warning light may be on.
Audi has determined that a faulty fuel injector may cause minor misfire conditions and, in turn, cause the Malfunction Indicator Lamp (MIL) on the instrument cluster to illuminate due to the presence of specific fault codes caused by this component. Please note that it is highly unlikely that the vehicle will experience an issue with multiple fuel injectors at the same time. The MIL is part of the on-board diagnostic system. Please refer to the owner's manual for additional information about the MIL. In some locales, an illuminated Malfunction Indicator Lamp could cause the vehicle to fail an IM emissions inspection, and the vehicle registration application could be denied. Be aware that other conditions (unrelated to the issue described in this bulletin) may cause the MIL in the vehicle to illuminate. Customers should be prepared to cover all diagnosis and repair costs for these other, unrelated conditions. This warranty extension covers only the diagnosis and replacement of a faulty fuel injector.
This communication is to inform you of upcoming Update 24Z6. On Audi vehicles with a 3.0L TFSI engine produced during a certain period, it is possible that the membrane on the vacuum actuator for the intake manifold flaps may tear. As a result, the intake manifold flaps do not function and the engine indicator light turns on. Install new manifold actuators.
DTC P164D00 (Oil pressure switch for reduced oil pressure malfunction) is stored in the engine control module, J623 (01). Red oil pressure warning light may be on. An oil filter that is too short is installed. The oil filter must be 155 mm.
Supersedes Technical Service Bulletin Group 01 number 13-78 dated March 20, 2013. DTC is stored in the engine control module. Red oil pressure warning light may be on. An oil filter that is too short is installed. The oil filter must be 155 (+/-1) mm long. If the oil filter is too short, the drain flap in the oil filter housing will not be completely closed and oil pressure will be lost.
Lightsensor warning light on intermittently. *tt
This TSB provides instructions for the combined baseline updates, and software version management.
This bulletin provides a software update for MMI, connectivity box for MIB3 vehicles (version MLB G1 ST3BP without GW without AED).
Updated work instructions: Clarified instructions if green emergency call LED is not illuminated before the software update Added reference to a TSB if there are issues with the emergency call system after the software update
Updated work instructions: Clarified instructions if green emergency call LED is not illuminated before the software update Added reference to a TSB if there are issues with the emergency call system after the software update
This bulletin provides information when vheicles with MIB3 (MLB) show an incorrect time in the instrument cluster / on MMI.
This bulletin provides ionformation before replacing the emergency call module J949.
This bulletin provides information when the message "Loading system. Please wait" is displayed after driving for an extended period.
This bulletin provides information if the radio plays when the vehicle is parked.
This Pending Service Solution (PSS) request that technicians create a record in the PSS database in instances where the incorrect time is show on the instrument cluster, or MMI display.
This TSB provides instructions for the combined baseline updates, and software version management.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).