Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Audi S6

1994–2025 · 5 generationen · 4 dokumentierte Mängel · 2 Märkte
Generationen

Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.

SchweregradAlleMittelGering
Modelljahr
S6 V · 2018–2025
BulletinMittelMotorNA

Bulletin

This bulletin provides information when the fuel tank cap seal is leaking; DTC P044200, P045600 and/ or P00EF00 in stored in the ECM.

NHTSA · Herstellerbulletin11034668Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S6 V · 2018–2025
BulletinMittelMotorNA

Bulletin

This bulletin provides information regarding UV leak additive for finding oil leaks.

NHTSA · Herstellerbulletin11028398Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S6 V · 2018–2025
BulletinMittelMotorNA

Bulletin

This bulletin provides information when the fuel tank cap seal is leaking; DTC P044200, P045600 and/ or P00EF00 in stored in the ECM.

NHTSA · Herstellerbulletin11025354Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S6 V · 2018–2025
BulletinMittelMotorNA

Bulletin

This bulleitn provides information regarding UV Leak additive for finding oil leaks.

NHTSA · Herstellerbulletin11022633Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S6 IV (C6) · 2012–2018
BulletinMittelMotorNA

Bulletin

The oil filter bypass valve on certain 2013 model year Audi 4.0L vehicles may not be present or may have been incorrectly installed during production.

NHTSA · Herstellerbulletin10120717Modelljahre 2013Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S6 IV (C6) · 2012–2018
BulletinMittelMotorNA

Bulletin

This document contains the notice about an upcoming Service action on the oil filter bypass valve. The oil filter bypass valve may not be present or may have been incorrectly installed during production.

NHTSA · Herstellerbulletin10119889Modelljahre 2013Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S6 V · 2018–2025
BulletinGeringMotorNA

Bulletin

This bulletin provides information when DTC B105A1A, B103E25 is stored in 0017; fuel tank level implausible.

NHTSA · Herstellerbulletin11035829Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S6 V · 2018–2025
BulletinGeringMotorNA

Bulletin

This bulletin provides information when DTC B105A1A, B103E25 is stored in 0017; fuel tank level implausible.

NHTSA · Herstellerbulletin11035828Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S6 V · 2018–2025
BulletinGeringMotorNA

Bulletin

This bulletin provides information when there is increased oil consumption; >0.5ltr/1000 km.

NHTSA · Herstellerbulletin11034657Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S6 V · 2018–2025
BulletinGeringMotorNA

Bulletin

This bulletin provides information when there is increased oil consumption; >0.5ltr/1000 km.

NHTSA · Herstellerbulletin11027356Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S6 IV (C6) · 2012–2018
BulletinGeringMotorNA

Bulletin

The fuel metering valve of the high-pressure fuel pump is controlled by a specific on/off ratio. If there is a low system voltage, the on/off ratio may not be enough to keep the fuel metering valve constant in all areas. In such a situation, the fuel metering valve is deactivated and the high-pressure fuel pump switches to full supply mode. Because the increased rail pressure does not match the respective driving situation, the DTC appears.

NHTSA · Herstellerbulletin10228391Modelljahre 2013Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S6 IV (C6) · 2012–2018
BulletinGeringMotorNA

Bulletin

The fuel metering valve of the high-pressure fuel pump is controlled by a specific on/off ratio. If there is a low system voltage, the on/off ratio may not be enough to keep the fuel metering valve constant in all areas. In such a situation, the fuel metering valve is deactivated and the high-pressure fuel pump switches to full supply mode. Because the increased rail pressure does not match the respective driving situation, the DTC appears.

NHTSA · Herstellerbulletin10225070Modelljahre 2013Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S6 IV (C6) · 2012–2018
BulletinGeringMotorNA

Bulletin

The fuel metering valve of the high-pressure fuel pump is controlled by a specific on/off ratio. If there is a low system voltage, the on/off ratio may not be enough to keep the fuel metering valve constant in all areas. In such a situation, the fuel metering valve is deactivated and the high-pressure fuel pump switches to full supply mode. Because the increased rail pressure does not match the respective driving situation, the DTC appears.

NHTSA · Herstellerbulletin10222043Modelljahre 2013Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S6 IV (C6) · 2012–2018
BulletinGeringMotorNA

Bulletin

There may be slow coolant loss from the connections of the coolant feed pipe and coolant return pipe. High temperatures cause the coolant to become encrusted on the connection flange of the turbocharger (Figure 1).

NHTSA · Herstellerbulletin10216668Modelljahre 2013Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S6 V · 2018–2025
BulletinGeringMotorNA

Bulletin

A highly sporadic startup timing issue can cause a message "CNG inspection Due! CNG Mode not available. Please contact workshop". This is a normal condition which can be resolved by recycling the ignition and repairs are not needed.

NHTSA · Herstellerbulletin10214760Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S6 V · 2018–2025
BulletinGeringMotorNA

Bulletin

A highly sporadic startup timing issue can cause a message "CNG inspection Due! CNG Mode not available. Please contact workshop". This is a normal condition which can be resolved by recycling the ignition and repairs are not needed.

NHTSA · Herstellerbulletin10212939Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S6 IV (C6) · 2012–2018
BulletinGeringMotorNA

Bulletin

Poor internal contact area on circuit board will lead to faults. Oil additives can cause the plastic circuit plates to delaminate, causing contact loss.

NHTSA · Herstellerbulletin10210635Modelljahre 2013Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S6 IV (C6) · 2012–2018
BulletinGeringMotorNA

Bulletin

Oil Capacity Table: Changed Oil Specs for all models

NHTSA · Herstellerbulletin10157225Modelljahre 2018Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S6 IV (C6) · 2012–2018
BulletinGeringMotorNA

Bulletin

Oil Capacity Table: Changed Oil Specs for all models

NHTSA · Herstellerbulletin10155701Modelljahre 2018Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S6 IV (C6) · 2012–2018
BulletinGeringMotorNA

Bulletin

Added Oil Capacity Chart at the end of the document.

NHTSA · Herstellerbulletin10153113Modelljahre 2018Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S6 IV (C6) · 2012–2018
BulletinGeringMotorNA

Bulletin

This bulletin contains repair information for a malfunctioning V50 coolant recirculation pump that prevents the passenger side from heating properly with DTC B10D004 or B11D501.

NHTSA · Herstellerbulletin10153062Modelljahre 2015Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S6 IV (C6) · 2012–2018
BulletinGeringMotorNA

Bulletin

Added Oil Capacity Chart at the end of the document.

NHTSA · Herstellerbulletin10153110Modelljahre 2017Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S6 IV (C6) · 2012–2018
BulletinGeringMotorNA

Bulletin

Major Maintenance Section: ADDED: "(except A3 e-tron)" at the end of "Cooling system - Check coolant level, add coolant if necessary, and check protection to spec -25C"

NHTSA · Herstellerbulletin10133435Modelljahre 2017Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S6 IV (C6) · 2012–2018
BulletinGeringMotorNA

Bulletin

Oil Capacity Table: For A3 B-Cycle 2.0 TFSI engine: Changed oil spec from 508/509** Castrol EDGE Professional 5W40 to 508/509** Castrol EDGE Professional 0W20 Long Life IV

NHTSA · Herstellerbulletin10133281Modelljahre 2018Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
S6 IV (C6) · 2012–2018
BulletinGeringMotorNA

Bulletin

Spark Plugs: replace at 55,000 miles (85,000 km) or 6 years, whichever occurs first. Thereafter, every 60,000 miles (90,000 km) or 6 years, whichever occurs first Added: 2.0L TFSI (Q3) For 35/75/115 Mile Spark Plug interval: Added Q3 to exclusion of Flex Fuel Engines.

NHTSA · Herstellerbulletin10130214Modelljahre 2015Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ältere →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).