Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

BMW X7

2018– · 1 generationen · 10 dokumentierte Mängel · 5 Märkte
Generationen
Alle GenerationenX72018–10128303

Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.

SchweregradAlleMittelGering
Modelljahr
MarktAlleNA
BulletinMittelMotorNA

Bulletin

COOLANT LEAK FROM LOW TEMPERATURE COOLING CIRCUIT (N63R): Coolant leaking from the engine compartment. Traces of coolant leaking from the expansion tank of the low temperature cooling system. Coolant in the low temperature cooling circuit may also have an acrid smell and discoloration.

NHTSA · Herstellerbulletin10166228Modelljahre 2019Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelMotorNA

Bulletin

COOLANT LEAK FROM LOW TEMPERATURE COOLING CIRCUIT (N63R) This Service Information bulletin replaces SI B17 06 17 dated February 2019.

NHTSA · Herstellerbulletin10163034Modelljahre 2019Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringMotorNA

Bulletin

The return springs on the exhaust camshaft followers (switchable rocker arm) may break.

NHTSA · Herstellerbulletin11036377Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringMotorNA

Bulletin

Due to an assembly error the upper oil pan screws may not have been torqued correctly.

NHTSA · Herstellerbulletin11027758Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringMotorNA

Bulletin

RSU availability. The engine cranks but will not start.

NHTSA · Herstellerbulletin11025670Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringMotorNA

Bulletin

Oil Drain Plug Return

NHTSA · Herstellerbulletin11024228Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringMotorNA

Bulletin

Due to an assembly error the upper oil pan screws may not have been torqued correctly.

NHTSA · Herstellerbulletin11022863Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringMotorNA

Bulletin

Due to an assembly error, the oil pump screws may not have been torqued correctly.

NHTSA · Herstellerbulletin11021816Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringMotorNA

Bulletin

Due to an assembly error the upper oil pan screws may not have been torqued correctly.

NHTSA · Herstellerbulletin11021815Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringMotorNA

Bulletin

Due to an assembly error the upper oil pan screws may not have been torqued correctly.

NHTSA · Herstellerbulletin11021813Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringMotorNA

Bulletin

Delivery stop: Oil pan top screw connection

NHTSA · Herstellerbulletin11021167Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringMotorNA

Bulletin

A quality check revealed that the DME in these vehicles has a programming error. This results in a deviation of the fuel-air mixture in the internal combustion engine.

NHTSA · Herstellerbulletin11020933Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringMotorNA

Bulletin

For certain model vehicles with the S68T engine, the Condition Based Service (CBS) data may show sparkplug replacement is due at a considerably earlier interval than specified in the Service and WarrantyInformational Booklet.

NHTSA · Herstellerbulletin11014663Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringMotorNA

Bulletin

The return springs on the exhaust camshaft followers (switchable rocker arm) may break.

NHTSA · Herstellerbulletin11014420Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringMotorNA

Bulletin

Customer perceptions: Vehicles with optional equipment 01CR -Remote Engine Start. The Remote Engine Start selection is missing in the Pre-conditioning sub-menu The Remote Engine Start can be selected using the vehicle key. However, the Remote Engine Start isnot carried out. The Check Control message (number 2055) appears: Remote engine start not available Vehicles with optional equipment 07ME - M Drivers Package: The increased maximum speed is not reached Vehicles with optional equipment 01MB - M Drive Professional: The M MODE TRACK is no longer available Only the M MODES ROAD and SPORT are available Applies to all the customer perceptions: Chance of the error occurring: Very rare, sporadic Both faults listed below are entered in the DME fault memory: 021280 - DME: Certificates (type 1) not ready And 021283 - DME, Secure Feature Activation: Secure Token check still running or unchecked Secure Token present Motor vehicles affected: Vehicles with engine S68T Vehicles with drive unit XB1T

NHTSA · Herstellerbulletin11002677Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringMotorNA

Bulletin

The return springs on the exhaust camshaft followers (switchable rocker arm) may break.

NHTSA · Herstellerbulletin11000497Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringMotorNA

Bulletin

The engine cranks but will not start.

NHTSA · Herstellerbulletin10250362Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringMotorNA

Bulletin

The return springs on the exhaust camshaft followers may break.

NHTSA · Herstellerbulletin10249014Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringMotorNA

Bulletin

High levels of silicone inside the ignition coil can lead to premature failure.

NHTSA · Herstellerbulletin10249449Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringMotorNA

Bulletin

The return springs on the exhaust camshaft followers may break.

NHTSA · Herstellerbulletin10246222Modelljahre 2024Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringMotorNA

Bulletin

Delivery Stop on certain Model Year 2019 and 2020 BMW vehicles that were produced between July 20 2018 and November 2 2019. There is a possibility of contamination in the engine.

NHTSA · Herstellerbulletin10169456Modelljahre 2019Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringMotorNA

Bulletin

ENGINE VIBRATIONS OR NOISE This Service Information bulletin replaces SI B11 01 19 dated February 2019.

NHTSA · Herstellerbulletin10163027Modelljahre 2019Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringMotorNA

Bulletin

HIGH ENGINE SPEED IMMEDIATELY AFTER STARTING. In rare circumstances after the engine is started with the Start-Stop button the engine speed may immediately increase to a high constant RPM (approximately 3000 rpm).

NHTSA · Herstellerbulletin10163031Modelljahre 2019Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringMotorNA

Bulletin

CHECK ENGINE OIL LEVEL MESSAGE. "Check engine oil level" Check Control message (ID961) appears when starting the engine and again at the end of a trip.

NHTSA · Herstellerbulletin10159117Modelljahre 2019Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).