Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

BuickBuick Enclave

2007– · 4 generationen · 24 dokumentierte Mängel · 1 Märkte
Generationen

Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.

SchweregradAlleMittelGering
Modelljahr
MarktAlleNA
Enclave II (2018) · 2019–2025
BulletinMittelMotorNA

Bulletin

This bulletin provides a procedure to locate and repair a possible oil galley plug from between the engine and flexplate if found the cause of the customers concern of an oil leak from center of vehicle.

NHTSA · Herstellerbulletin11022866Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Enclave II (2018) · 2019–2025
BulletinMittelMotorNA

Bulletin

This bulletin provides a procedure to locate and repair a possible cooler galley plug if found the cause of the customers concern of an oil leak from front of vehicle.

NHTSA · Herstellerbulletin11022062Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Enclave II (2018) · 2019–2025
BulletinMittelMotorNA

Bulletin

This bulletin provides a procedure to locate and repair a possible rolled seal at the intake actuator magnet if found the cause of the customers concern of an oil leak at top of engine.

NHTSA · Herstellerbulletin11022033Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Enclave II (2018) · 2019–2025
BulletinMittelMotorNA

Bulletin

This bulletin provides a procedure to locate a leak at the oil drain plug, clean it, and reinstall it to correct the concern.

NHTSA · Herstellerbulletin11011130Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Enclave II (2018) · 2019–2025
BulletinMittelMotorNA

Bulletin

This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to vehicles being towed in due to loss of drive.

NHTSA · Herstellerbulletin10214509Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Enclave II (2018) · 2019–2025
BulletinMittelMotorNA

Bulletin

This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to vehicles being towed in due to loss of drive.

NHTSA · Herstellerbulletin10210864Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Enclave I · 2007–2017
BulletinMittelMotorNA

Bulletin

This technical bulletin provides a procedure to replace both fuel feed lines for a leak and/or noise coming from pulses in the fuel line.

NHTSA · Herstellerbulletin10172777Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Enclave II (2018) · 2019–2025
BulletinMittelMotorNA

Bulletin

This engineering informational bulletin is requesting information from the field on warranty parts for complete canister assemblies that apply to the DTC codes specified and has leak conditions. Engineering is determining a root cause and developing a Field Fix.

NHTSA · Herstellerbulletin10165134Modelljahre 2019Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Enclave I · 2007–2017
BulletinMittelMotorNA

Bulletin

This technical bulletin provides a procedure to replace both fuel feed lines for a leak and/or noise coming from pulses in the fuel line.

NHTSA · Herstellerbulletin10159620Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Enclave II (2018) · 2019–2025
BulletinMittelMotorNA

Bulletin

This technical bulletin provides a procedure to replace the rear diff assembly if the oil has leaked into the torque tube causing the rear diff to fail.

NHTSA · Herstellerbulletin10155105Modelljahre 2019Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Enclave I · 2007–2017
BulletinMittelMotorNA

Bulletin

This technical bulletin provides a procedure to replace the crankshaft bearings and rear oil seal to correct the customers concer of an oil leak.

NHTSA · Herstellerbulletin10138672Modelljahre 2013Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Enclave I · 2007–2017
BulletinMittelMotorNA

Bulletin

15532 - Service Update. This bulletin provides a service procedure to correct a potential oil leak on certain 2015 model year Buick Enclave, Chevrolet Traverse and GMC Acadia vehicles equipped with a HFV6 engine (RPO LLT). The potential leak is from the oil pan crank case at an engine mount hole location, which is not under engine oil system pressure. To correct this condition, dealers will remove the mounting bolt, clean the bolt and hole, apply thread sealant and reinstall the bolt.

NHTSA · Herstellerbulletin10123489Modelljahre 2015Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Enclave I · 2007–2017
BulletinMittelMotorNA

Bulletin

Gm: The engine may be leaking from the front cover or oil filter adapter. This is not a recall. *js

NHTSA · Herstellerbulletin10052475Modelljahre 2013Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Enclave III (2018) · 2024–
BulletinGeringMotorNA

Bulletin

A dealer is advised to perform no repairs if U3000 SYM 92 is found. Engineering is working on a resolution

NHTSA · Herstellerbulletin11037552Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Enclave III (2018) · 2024–
BulletinGeringMotorNA

Bulletin

Service Update. Certain vehicles listed above may have contamination inside the high-pressure fuel pump spill valve assembly. Dealers will replace the high pressure fuel pump.

NHTSA · Herstellerbulletin11030082Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Enclave III (2018) · 2024–
BulletinGeringMotorNA

Bulletin

Service Update. Certain vehicles listed above may have a condition in which a quality issue with the engine was identified. Dealers will replace the engine.

NHTSA · Herstellerbulletin11029018Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Enclave III (2018) · 2024–
BulletinGeringMotorNA

Bulletin

Service Update. Certain vehicles listed above may have a condition in which a quality issue with the engine was identified. Dealers will replace the engine.

NHTSA · Herstellerbulletin11028911Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Enclave II (2018) · 2019–2025
BulletinGeringMotorNA

Bulletin

This bulletin provides a procedure to verify a noise and replace the oil pump shaft assembly if the gears of the pump and balance shaft are found the issue of the customers concern.

NHTSA · Herstellerbulletin11024953Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Enclave II (2018) · 2019–2025
BulletinGeringMotorNA

Bulletin

This bulletin provides a procedure to replace the oil pump due to a loose drive pump gear not pressed on the pump shaft.

NHTSA · Herstellerbulletin11024495Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Enclave II (2018) · 2019–2025
BulletinGeringMotorNA

Bulletin

Special Coverage. Certain vehicles listed above may have a condition that could cause the mounting bracket on the front exhaust pipe to separate from the pipe. If this condition occurs, a hole may develop in the exhaust pipe at the bracket location, and a rattling or increased exhaust noise may be heard. This special coverage covers the condition described above for a period of 15 years or 150,000 miles (240,000 km), whichever occurs first, from the date the vehicle was originally placed in service, regardless of ownership. For vehicles covered by Vehicle Service Contracts, all eligible claims with repair orders on or after June 10, 2025, are covered by this special coverage and must be submitted using the labor operation codes provided with this bulletin. Claims with repair orders prior to June 10, 2025, must be submitted to the Service Contract provider. Vehicle owners or lessees who paid for repairs referenced in this Special Coverage (Customers) are eligible for reimbursement of their reasonable and customary expenses in accordance with the procedures specified below. The conditional right to reimbursement is provided by GM solely in the interest of customer satisfaction and is personal to Customers. Customers may not assign and GM does not consent to any assignment of any Customers right to submit reimbursement claims, or to receive reimbursement, or any other rights granted by this Special Coverage to any third party, including but not limited to service contract providers, and this Special Coverage is not intended to and does not confer any third party beneficiary, subrogation or contribution rights, or any other rights to reimbursement, against GM, whether in law, equity or otherwise, on any third parties. Dealers are to replace the front exhaust pipe as necessary. The repairs will be made at no charge to the customer.

NHTSA · Herstellerbulletin11019411Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Enclave II (2018) · 2019–2025
BulletinGeringMotorNA

Bulletin

This Preliminary information communicates to the technician to inspect the piston oil nozzles for damage if the vehicle exhibits P06DD anderratic oil pressure that is low at an idle. If any of the piston oil nozzles are damaged, replace all four piston oil nozzles.

NHTSA · Herstellerbulletin11014313Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Enclave II (2018) · 2019–2025
BulletinGeringMotorNA

Bulletin

This Preliminary information communicates a potential chirp noise coming from the engine compartment.

NHTSA · Herstellerbulletin11014310Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Enclave II (2018) · 2019–2025
BulletinGeringMotorNA

Bulletin

This engineering information (EI) closure ends the need for gathering further information from technicians in regard to a whine and/or chirp type noise heard coming from the engine compartment.

NHTSA · Herstellerbulletin11014145Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Enclave II (2018) · 2019–2025
BulletinGeringMotorNA

Bulletin

This bulletin provides a procedure to replace the oil pump due to a loose drive pump gear not pressed on the pump shaft.

NHTSA · Herstellerbulletin11012697Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Enclave II (2018) · 2019–2025
BulletinGeringMotorNA

Bulletin

This Preliminary information communicates when diagnosing P050D cold start misfire runs rough, if any fuel injectors need to be replaced, all the fuel injectors must be ordered and replaced at the same time due to fuel injector flow rates being matched.

NHTSA · Herstellerbulletin11011185Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ältere →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).