Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
N192269770 - Service Update. Certain vehicles may have the driver side front seatbelt intermediate guide not properly installed into the B-Pillar. When this happens, the intermediate guide may become disengaged from the pillar. A loose intermediate guide may produce a metal to metal sound while allowing the seatbelt webbing to retract or while driving, as the intermediate guide contacts the seatbelt assembly webbing guide at the bottom of the B-Pillar. It is unlikely that the loose intermediate guide would affect the proper operation of the seatbelt assembly. Dealers are to inspect to ensure proper installation of the seatbelt guide loop.
This informational bulletin provides information regarding the Passenger Presence System (PPS) May Command Seat Belt Reminder Chime and Passenger Airbag Indicator On When Electronic Devices or Conductive Objects are Placed on Front Passenger Seat
This preliminary informational bulletin provides information on the driver airbag light is flashing in the cluster and/or the passenger airbag ON indicator does not illuminate when the passenger is present when the SDM setup has not been completed after reprogramming.
This informational bulletin provides information regarding the Passenger Presence System (PPS) May Command Seat Belt Reminder Chime and Passenger Airbag Indicator On When Electronic Devices or Conductive Objects are Placed on Front Passenger Seat
This Preliminary Information communication provides information to the technician about vehicles that before service update 12262 the memory seats were not linked to the key fobs. Technician should be advised that the updated calibration installed during Service Update Bulletin 12262 will eliminate the "RKE Memory positions" and will now link memory 1 and 2 to the fobs.
"12187c - customer satisfaction program (revised expiration date). Certain vehicles that were serviced with an incorrect calibration, may have a condition in which the automatic crash response system may not work as intended because of a software problem. The automatic crash response system is intended to enable these vehicles to notify onstar if they are involved in certain types of crashes. The software problem we found affects the vehicles ability to notify onstar in crashes that meet the severity parameters for automatic crash notification but do not trigger airbag deployment, such as certain rear end crashes. In crashes with an airbag deployment, the automatic crash response system works as designed. This condition does not affect the deployment of the airbags or the safety belt pretensioners, which reduce slack in the safety belt immediately after impact. The airbags and safety belt pretensioners will deploy as designed. A vehicle occupant will be able to contact an onstar emergency advisor by pushing the onstar emergency button. Dealers are to reprogram the sensing and diagnostic module (sdm)."
14891 - service update. This bulletin provides a service procedure to remove the a/c actuator, rotate the bypass door to the full-open position, and reinstall the actuator on certain vehicles. These vehicles may have been built with an incorrect a/c vent assembly. This condition will prevent adequate heating and cooling for passengers in the rear seats.
Passenger Presence System (PPS) May Command Seat Belt Reminder Chime Passenger Airbag Indicator On When Electronic Devices or Conductive Objects are Placed on Front Passenger Seat
Service Update for Inventory and Customer Vehicles Inspect Seat Memory Switch Retention, if Equipped, and Replace Outside Door Handles and Outside Door Handle Cables Expires with Base Warranty
32470 01 - Service Update (Service Procedure Revised) - The Rear (or mid-row seat ) HVAC control panel capacitive touch sense buttons are inoperative due to the chrome plating on the buttons being too thick, creating electrical resistance. Replace the Auxiliary Heater and Air Conditioning Control.
12290 - Service Update. The trim on the front corners of the seat cushion is loose and potentially bunching or wrinkling. Dealers are to tighten the driver and front passenger seat cushion trim.
12283 - Service Update. The seat memory switch button recesses into the door trim when pressed. Dealers are to inspect for the proper retention of the seat memory switch and, if necessary, secure the switch.
This Preliminary Information communication provides information to the technician about vehicles that in the radio settings some of the vehicle personalization selections within the Comfort and Convenience menu are missing at times. Technician will need to perform a scan for Diagnostic Trouble Codes. Technician will need to follow published Service Information diagnostics if there are Diagnostic Trouble Codes present. If the concern is and intermittent this Preliminary Information communication will be updated with a repair. When the personalization selections are not missing from the Comfort and Convenience menu but they are missing from other menus such as the Climate and Air Quality, Collision/Detection Systems, and Lighting menus, refer to bulletin 17-NA-086. Memory seat adjustments may not be available tech will need to perform a Memory Seat Module replacement/programming.
This Preliminary Information communication provides information to the technician about vehicles that in the radio settings some of the vehicle personalization selections within the Comfort and Convenience menu are missing at times. Technician will need to perform a scan for Diagnostic Trouble Codes. Technician will need to follow published Service Information diagnostics if there are Diagnostic Trouble Codes present. If the concern is and intermittent this Preliminary Information communication will be updated with a repair. When the personalization selections are not missing from the Comfort and Convenience menu but they are missing from other menus such as the Climate and Air Quality, Collision/Detection Systems, and Lighting menus, refer to bulletin 17-NA-086. Memory seat adjustments may not be available tech will need to perform a Memory Seat Module replacement/programming.
16048 -Service Update. Certain vehicles may have a condition in which the over-mold polymer material on the seat belt latch plate of the rear outboard seat belts may not allow the latch plate to be properly inserted into the buckle, or may require excessive force for the buckle to latch. The customer may be unable to buckle the seat belt. Dealers will inspect, and if necessary, replace one or both rear outboard seat belt assemblies.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).