Bulletin
This bulletin provides a procedure to replace the FPDCM if found to cause customers concerns of Crank No Start, Stalling, Loss of Power, Fuel Gauge Inoperative/Erratic, MIL Illuminated - DTC P023F and/or P129F Set.
🔔 Kostenloses Konto anlegen und Benachrichtigungen zu Chevrolet Express erhalten
Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
This bulletin provides a procedure to replace the FPDCM if found to cause customers concerns of Crank No Start, Stalling, Loss of Power, Fuel Gauge Inoperative/Erratic, MIL Illuminated - DTC P023F and/or P129F Set.
This Preliminary information communicates a vehicle may come to the dealer with a complaint of no start, stalling, rough idle, no acceleration, loss of power, erratic shifting, fuel gauge inoperative, MIL illuminated with various codes stored. Technicians are directed to replace the K111FPDCM if any of these conditions can be validated and code P023F or P129F is found.
This bulletin provides a procedure to replace the FPDCM if found to cause customers concerns of Crank No Start, Stalling, Loss of Power, Fuel Gauge Inoperative/Erratic, MIL Illuminated - DTC P023F and/or P129F Set.
This bulletin provides a procedure to replace the FPDCM if found to cause customers concerns of Crank No Start, Stalling, Loss of Power, Fuel Gauge Inoperative/Erratic, MIL Illuminated - DTC P023F and/or P129F Set.
Diese Servicemitteilung informiert über ein neues Kraftstoffeinspritz-Reinigungsset zur Entkohlung der Einlassventile, das zur Behebung von unrundem Leerlauf, Kurbeln ohne Anspringen, verlängertem Kurbeln oder Zündaussetzern sowie von aufleuchtender MIL mit DTCs eingesetzt wird. Außerdem wird erläutert, wie Kraftstoffe der Top Tier-Qualität verwendet werden sollten, um die Kohlenstoffablagerungen zu verringern.
This Preliminary information communicates that when removing the fuel line jumper hose care should be taken to be sure the line is reinstalled correctly to avoid a no/low fuel pressure situation.
This Preliminary information communicates a vehicle may come to the dealer with a complaint of no start, stalling, rough idle, no acceleration, loss of power, erratic shifting, fuel gauge inoperative, MIL illuminated with various codes stored. Technicians are directed to replace the K111FPDCM if any of these conditions can be validated and code P023F or P129F is found.
This Preliminary information communicates a vehicle may come to the dealer with a complaint of no start, stalling, rough idle, no acceleration, loss of power, erratic shifting, fuel gauge inoperative, MIL illuminated with various codes stored. Technicians are directed to replace the K111FPDCM if any of these conditions can be validated.
This Preliminary information communicates a vehicle may come to the dealer with a complaint of no start, stalling, rough idle, no acceleration, loss of power, erratic shifting, fuel gauge inoperative, MIL illuminated with various codes stored. Technicians are directed to replace the K111FPDCM if any of these conditions can be validated.
This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
This Preliminary information communicates a vehicle may come to the dealer with a complaint of no start, stalling, rough idle, no acceleration, loss of power, erratic shifting, fuel gauge inoperative, MIL illuminated with various codes stored. Technicians are directed to replace the K111FPDCM if any of these conditions can be validated.
This PI bulletin advises the technician on the proper way to install the pistons in an engine.
This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
Emission Recall. On certain vehicles, The Vehicle Emissions Control Information (VECI) label may not contain the correct OBD (On-Board Diagnostic) system identifier. Since a new label can be easily installed, and to reduce customer inconvenience, the label will be sent directly to customers of record along with the installation instructions. Customers may install the label or, if they desire, they may take the label to their dealer for installation at no charge.
Emission Recall. On certain vehicles, The Vehicle Emissions Control Information (VECI) label may not contain the correct OBD (On-Board Diagnostic) system identifier. Since a new label can be easily installed, and to reduce customer inconvenience, the label will be sent directly to customers of record along with the installation instructions. Customers may install the label or, if they desire, they may take the label to their dealer for installation at no charge.
This service bulletin provides diagnostic information for the technician regarding a customer concern of engine overheating, cooling system contaminated with engine oil.
This service bulletin provides diagnostic information for the technician regarding a customer concern of engine overheating, cooling system contaminated with engine oil.
This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
This informational bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
This Preliminary information communicatesA vehicle may have a concern of engine noise and/or a misfire. This may be caused by a broken rocker arm. A broken rocker arms that could result in the valve dropping to the cylinder, causing a catastrophic failure and the engine requires replacement due to cylinder head and block damage. If a broken rocker arm is found check to see if the valve dropped into the cylinder if so the engine will need to be replaced. On occasions the valve will not drop, reinstall any valve keepers and replace all the intake rocker arms.
17356 - Emission Recall. Vehicles may experience an inoperative fuel pump leading to a no start or stall without warning. The fuel pump is to be replaced with a new design fuel pump.
This preliminary information communication advises the technician that engineering is working on a new new engine calibration. The vehicle's engine may stall when coming to a stop.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).