Bulletin
Malfunction indicator lamp (mil) illumination, diagnostic trouble code (dtc) p0442, p0455, or p0456 - leak detection pump (ldp), leak detected. This bulletin supersedes 25-001-02 dated feb 11, 2002. *tt
🔔 Kostenloses Konto anlegen und Benachrichtigungen zu Chrysler Sebring (alle generationen) erhalten
Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
Malfunction indicator lamp (mil) illumination, diagnostic trouble code (dtc) p0442, p0455, or p0456 - leak detection pump (ldp), leak detected. This bulletin supersedes 25-001-02 dated feb 11, 2002. *tt
Some vehicles may experience a no start condition in cold temperatures due to 5 volt regulator failure in the sbec pcm module. *jb
Approximately 8800 jr vehicles built prior to september 26, 2000 with the traveler option and not a smart key immobilizer module may experience an engine no start due to a traveler module software problem. *tt
Information on no start diagnostic cam/crank sensor $01 and $28. *nlm
Sicherheitsmodul sperrt nach Eingabe der PIN zum Entsperren des drahtlosen Steuermoduls (WCM)
Sicherheitsmodul-Sperre nach Eingabe der PIN zum Entsperren des Wireless Control Module (WCM)
Lünette – Instrumentenbrett
Bezel - instrument panel
Module - fuel pump/level unit
Switch - headlamp
Instrument panel - base panel
Radio - Multimedia
RES / RHA / REB Radios That Support Bluetooth and Hands-Free 1. For issues with Bluetooth, Hands-Free Calling, and/or Voice Commands; DO NOT replace the radio. Diagnose the Hands-Free Module system (also called the Telematics Module). The Hands Free Module (and associated components) are the systems responsible for these features. A power cycle may be required for the hands-free module for proper diagnosis. Please reference; 8T - Navigation/Telecommunication Diagnosis and Testing (DIAGNOSIS AND TESTING - HANDS FREE PHONE)
Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary. When testing batteries and charging systems, the correct battery tester and charger must be used. Dealers must follow service information for the proper procedures when testing the charging system and batteries. Also, the dealer must follow warranty policies and procedures for proper reimbursement for battery replacement. Refer to the appropriate regional warranty manual to obtain specific warranty reimbursement requirements. This may include specific data which must be recorded and/or specific documentation which may be required to be attached to the work order. In the event the warranty policies and procedures are not followed, warranty reimbursement could be declined or charged back.
Flash: UConnect and Voice Recognition Inoperative This bulletin involves replacing the Hands Free Module (HFM). The customer may describe the following conditions: A complete loss of UConnect operation. A complete loss of Voice Recognition functionality
Flash: UConnect and Voice Recognition Inoperative This bulletin involves replacing the Hands Free Module (HFM). The customer may describe the following conditions: A complete loss of UConnect operation. A complete loss of Voice Recognition functionality
RES / RHA / REB Radios That Supports Bluetooth and Hands-Free For issues with Bluetooth, Hands-Free Calling, and/or Voice Commands, DO NOT replace the radio. Diagnose the Hands-Free Module system (also called the Telematics Module). The Telematics Module (and associated components) are the systems responsible for these features. A power cycle may be required for the hands-free module for proper diagnosis.~ Please reference; 8T - Navigation/Telecommunication Diagnosis and Testing (DIAGNOSIS AND TESTING - HANDS FREE PHONE)
Dvd software update ren mygig radio for many radio functional issues and improvements. *nj
Rapid response transmittal/service action #08-023 - incorrect engine harness crank sensor connector terminals. *nj
Speed sensor wire harness modification. *nj
Hose clamp for air flow sensor out of position. Vehicels equipped with a 2.4l pzev engine. *nj
Oil indicator lamp momentary illumination or flicker at idle. *kb
Mil illumination/generator lamp illumination/ oil pressure lamp illumination/driveability improvements. *kb
Rough idle, malfunction indicator lamp illumination, diagnostic trouble code p0303. *ak
Driveability improvements or malfunction indicator lamp (mil) illumination with diagnostic trouble codes p2074. Flash. *tt
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).