Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Chrysler Sebring

1994–2010 · 3 generationen · 34 dokumentierte Mängel · 4 Märkte
Generationen
Modelljahr
Sebring III · 2006–2010
Sebring II · 2000–2006
Sebring II · 2000–2006
RückrufKritischMotorNA

Fuel system, gasoline:Delivery:Fuel pump

On certain passenger vehicles, the fuel return line hose fitting on the electric fuel pump may be restricted, causing excessive fuel pressure to build up in the fuel injection system. Excessive fuel pressure may result in a leak in the fuel return hose.

NHTSA · USA4. Nov. 200303V443000Modelljahre 2003–2004Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sebring III · 2006–2010
RückrufMittelMotorNA

Fuel system, other:Storage:Fuel gauge system

Chrysler is recalling 91 my 2009 sebring and dodge avenger equipped with 2.4l engine passenger vehicles. A compatibility issue between the instrument cluster software and fuel pump module can result in the fuel gauge overstating the actual fuel tank level. As a result, the vehicle may run out of fuel when the gauge indicates that there is still fuel remaining in the tank.

NHTSA · USA4. Feb. 200909V047000Modelljahre 2009Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sebring III · 2006–2010
RückrufMittelMotorUK

Engine may stall

It has been identified that an unused tyre pressure monitoring system electrical connector may become corroded and short circuit. This can lead to a variety of conditions including dead battery inoperative cruise control and engine non- start or stall

DVSA · Vereinigtes Königreich17. Juli 2008R/2008/064Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sebring I (FJ/JX) · 1994–2000
RückrufMittelMotorNA

Vehicle speed control

On certain passenger vehicles equipped with 2.5l v6 engines, the throttle control cable can fray causing the throttle to bind or stick.

NHTSA · USA8. Juli 200202V186000Modelljahre 1996–1997Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sebring II · 2000–2006
RückrufMittelMotorNA

Engine

On certain vehicles, the harness for the crankshaft position sensor could come in contact with a new protective shield causing a grounded circuit. Prolonged wiring harness contact with the heat shield will cause the wiring insulation to wear and eventually to ground out. This could cause the engine to die out, increasing the risk of a crash. Correction: Crank position sensor wiring harness will be rerouted.

Transport Canada6. März 20012001048Modelljahre 2001Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sebring II · 2000–2006
Sebring II · 2000–2006
RückrufMittelMotorNA

Engine and engine cooling:Engine

Vehicle description: Passenger vehicles. The harness for the crankshaft position sensor could come in contact with a new protective shield causing a grounded circuit.

NHTSA · USA2. Okt. 200000V299002Modelljahre 2001Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sebring I (FJ/JX) · 1994–2000
RückrufMittelMotorNA

Emissions

These vehicles may not comply with c.M.V.S.S. 1103 - exhaust emissions. The aspirator system may fail, resulting in increased levels of nitrous oxide emissions. Correction: The aspirator system will be removed, the fuel pressure regulator will be replaced, if required, with one having the latest design and the power control module (pcm) will be reprogrammed.

Transport Canada25. Mai 19981998106Modelljahre 1995Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sebring I (FJ/JX) · 1994–2000
RückrufMittelMotorNA

Vehicle speed control

Vehicle description: Passenger vehicles. The dash panel pad can shift interferring with the throttle cable control.

NHTSA · USA3. März 199898V045002Modelljahre 1998Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sebring I (FJ/JX) · 1994–2000
RückrufMittelMotorNA

Emissions

Certain vehicles do not comply with CMVSS 1103 - exhaust emissions. The calibration of the Powertrain Control Module (PCM) may fail to adequately control CO emissions. Correction: PCM will be reflashed with a new calibration.

Transport Canada21. Jan. 19981998010Modelljahre 1996Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sebring I (FJ/JX) · 1994–2000
RückrufGeringMotorNA

Engine

The dash panel may sag and interfere with the accelerator pedal which could prevent the throttle from closing or result in a throttle sticking condition. Correction: The dash panel pad will be trimmed above the accelerator pedal.

Transport Canada5. Mai 19981998090Modelljahre 1998Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Sebring I (FJ/JX) · 1994–2000
RückrufGeringMotorNA

Emissions

Certain sebring convertible vehicles do not comply with CMVSS. 1101 - emission device. The vehicle emission control information (veci) label has an error in the hose routing schematic. Correction: Correct labels and installation instructions will be mailed to owners.

Transport Canada11. Dez. 19971997220Modelljahre 1998Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).