Crack may occur witin a capacitor inside the camshaft position sensor
The Camshaft position sensor may overheat causing the engine management warning light to illuminate and in the worst case a localised thermal incident may occur
🔔 Kostenloses Konto anlegen und Benachrichtigungen zu Daewoo Lanos erhalten
The Camshaft position sensor may overheat causing the engine management warning light to illuminate and in the worst case a localised thermal incident may occur
On certain vehicles, the ECM wiring harness which is located in the passenger footwell area may chafe against a caulked body seam due to movement of the passenger's feet and result in a short circuit to ground. There is a possibility that engine driveablity may be affected and/or the engine may stall. Correction: Extra protection will be applied to the wiring harness and an additional tie strap will be installed to reroute the ECM harness away from the body seam.
Vehicle description: Passenger vehicles. A wiring harness, located beneath the carpet in the front passenger floor area, can become damaged by passenger traffic as the wire harness is rubbed against a body seam in the floor panel.
Vehicle description: Passenger vehicles. A wiring harness, located beneath the carpet in the front passenger floor area, can become damaged by passenger traffic as the wire harness is rubbed against a body seam in the floor panel.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).