Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
"Engine Oil Cooler Leak Customers may comment on one or more of the following: Vehicle overheats. Coolant overflow recovery bottle contains milky fluid. Coolant found leaking under the vehicle. Engine oil cooler is leaking. This bulletin involves installing a coolant flow restrictor and possibly replacing the engine oil cooler."
COOLER Engine Oil Please be aware that the oil cooler seal is serviceable as a standalone part and should be considered for replacement as a remedy for fluid leak.
PUMP Water For 2016-2024MY 3.6L Pentastar Upgrade with suspected coolant leak. PRIOR TO PERFORMING ANY WATER PUMP REPLACEMENT, PROCEED WITH INSPECTION INSTRUCTIONS FROM THE LATEST VERSION OF STAR ONLINE PUBLICATION S2307000002. Please submit pictures of the leak area thru the DIDI process outlined in the STAR Online document. NOTE: Some coolant residue may be found at the water pump weep hole plug area which may be normal, but coolant should not be dripping from this location. If unsure about, use the Pressurized Coolant System Inspection process as found in the Dealer Connect Cooling Diagnosis and Testing Procedures.
PUMP Water For 2016-2024MY 3.6L Pentastar Upgrade with suspected coolant leak. PRIOR TO PERFORMING ANY WATER PUMP REPLACEMENT, PROCEED WITH INSPECTION INSTRUCTIONS FROM THE LATEST VERSION OF STAR ONLINE PUBLICATION S2307000002. Please submit pictures of the leak area thru the DIDI process outlined in the STAR Online document. NOTE: Some coolant residue may be found at the water pump weep hole plug area which may be normal, but coolant should not be dripping from this location. If unsure about, use the Pressurized Coolant System Inspection process as found in the Dealer Connect Cooling Diagnosis and Testing Procedures.
## Fehlender oberer Hitzeschild des Kraftstofftanks
Diese Serviceinformation betrifft die Montage des oberen Hitzeschilds auf der Oberseite des Kraftstofftanks. Kunden oder Techniker können feststellen, dass bei einem Fahrzeug mit dem Tow-'n'-Go-Paket der obere Hitzeschild des Kraftstofftanks fehlt.
## Fehlender oberer Hitzeschild des Kraftstofftanks
Diese Serviceinformation betrifft die Montage des oberen Hitzeschilds auf der Oberseite des Kraftstofftanks. Kunden oder Techniker können feststellen, dass bei einem Fahrzeug mit Tow-'n'-Go-Paket der obere Hitzeschild des Kraftstofftanks fehlt.
Kundenzufriedenheitsmitteilung T12 VECI-Etikett
Das Fahrzeugemissions-Kontrollinformations-Etikett (VECI-Etikett) bei etwa 120.000 der oben genannten Fahrzeuge enthält möglicherweise keine Emissionskontrollinformationen. Das VECI-Etikett wird häufig bei der Prüfung und Wartung im Betrieb (Inspection and Maintenance, I/M) verwendet, um die ordnungsgemäße Funktion emissionsrelevanter Bauteile zu überprüfen. Falsche Angaben auf dem VECI-Etikett könnten im Bundesstaat Kalifornien zur Verweigerung der Fahrzeugzulassung führen. Ein neues VECI-Etikett muss installiert werden.
Replace Vehicle Emission Certification Information Label This bulletin involves replacing the Vehicle Emission Certification Information (VECI) Label.Owner may be turned away from Inspection and Maintenance (IM) station or fail IM testing because of missing emission components on VECI label. The customer may notice that some info is missing on their VECI labels.is missing. If information is shown in this area, do not replace the label.All vehicles were built with the correct emission components installed and there is no impact on emission performance or drivability.
SEAL, Crankshaft Oil, Front Front crankshaft oil seal leak: For concern of front crankshaft seal leak please send an email to brenton.swank@fcagroup.com with VIN, Mileage, Photos and indicate where the leak is identified using dye such as: 1. Leak between the outer diameter of the seal to front cover? 2. Leak between the seal and damper 3. Leak through the damper bolt This will help in determining root cause and corrective action. For additional questions, please contact: Brenton Swank: Cell (248) 804-9386 or brenton.swank@fcagroup.com If no response in 15 minutes, proceed with repair.
Vehicle Emission Certification Information Label ersetzen
Dieses Bulletin betrifft den Austausch des Fahrzeug-Emissionszertifizierungs-Informationsschildes (VECI-Label).
Der Halter wird unter Umständen bei einer Prüfstelle für Inspektion und Wartung (IM-Prüfstelle) abgewiesen oder fällt bei der IM-Prüfung durch, da Emissionsbauteile auf dem VECI-Label fehlen. Der Kunde bemerkt möglicherweise, dass einige Angaben auf seinen VECI-Labels fehlen. Wenn in diesem Bereich Informationen angezeigt werden, ersetzen Sie das Label nicht.
Alle Fahrzeuge wurden mit den korrekt verbauten Emissionsbauteilen gefertigt, und es gibt keine Auswirkungen auf die Emissionsleistung oder das Fahrverhalten.
"pentastar oil filter adapter before replacing this part, please call any one of the following people. Engineering is seeking information regarding this part.~ dye must be used to determine where the leak is coming from before replacing. Also please check the recently updated service bulletin number 09-008-15. ~ first: Nick morand cell (248) 410-5078 - nick.Morand@fcagroup.Com second: Bob jackson cell (248) 944-0466 - bob.Jackson@fcagroup.Com third: Joe lovell cell (734 309-6467 - joe.Lovell@fcagroup.Com if a response is not received within 15 mins, then proceed with the necessary repair."
Various vehicles are experiencing loss of oil, and possibly an oil leakage pooling in engine valley and possibly need replacing oil filter housing. Model 2014. *pe
ENGINE ASSY - 3.6L AUTO TRANS
Vor dem Austausch des Motors wegen eines ungewöhnlichen Tickgeräuschs prüfen Sie bitte, ob die INTAKE-Hydrostößel (Hydraulic Lash Adjuster, HLA) nicht „kollabiert" sind. Wird ein kollabierter INTAKE-HLA gefunden, sind alle INTAKE-HLAs am betroffenen Zylinderkopf zu ersetzen. Das Geräusch kann bei niedrigen oder hohen Drehzahlen sowie bei niedrigen oder hohen Temperaturen auftreten. Es sind keine Diagnostic Trouble Codes (DTCs) vorhanden.
URSACHE: Der INTAKE-Hydrostößel weist möglicherweise einen Herstellungsfehler auf, durch den der Plunger klemmen kann, wodurch Ventiltriebgeräusche entstehen.
## Tankdüse schaltet vorzeitig ab
Der Kunde kann Folgendes feststellen: ? Tank nur schwer zu befüllen, Zapfpistole schaltet vorzeitig ab. Diese Serviceinformation umfasst die Prüfung und den Austausch des Tankeinfüllrohrs.
Motor: Tickgeräusch
Der Motor erzeugt ein ungewöhnliches Tickgeräusch. Eventuell sind Diagnose-Fehlercodes (DTC) gespeichert. Diese Mitteilung betrifft die Prüfung und gegebenenfalls den Austausch der Einlass-Hydrostößel (HLA).
HINWEIS: **BEI ALLEN FAHRZEUGEN AUF DER RSU-FAHRGESTELLNUMMERNLISTE MÜSSEN ALLE 12 EINLASS-HYDROSTÖSSEL ERSETZT WERDEN**.
**Fall 1)** Wenn der PSU-(Pentastar Upgrade Engine)-PCM aufgrund des Vorhandenseins des Fehlercodes P0300 geflasht werden soll, darf nur die rechte Einlassnockenwelle des PSU der Stufe AB oder älter, PN 05047913AA oder AB (alte Version), ersetzt werden. Ist der Motor mit der rechten Einlassnockenwelle des PSU der Stufe AC/AD, PN 05047913AC oder AD (neue Version), ausgestattet, darf die Nockenwelle NICHT ersetzt werden.
**Fall 2)** Wenn die Einlassnockenwelle oder der Einlass-Kipphebel übermäßigen Verschleiß am Hub-Profil aufweist (Kipphebel: Gleitstück, Nockenwelle: mittlerer Nocken), ersetzen Sie die Einlassnockenwelle (1) in diesem Zylinderkopf sowie alle Einlass-Kipphebel (6).
Engine Ticking Noise Engine makes an abnormal ticking noise. There may be Diagnostic Trouble Codes (DTC)s present. This bulletin involves inspecting and if needed, replacing the intake HLAs.
ENGINE ASSY - 3.6L AUTO TRANS Before replacing the engine due to an abnormal ticking noise, please check that the INTAKE Hydraulic Lash Adjusters are not "collapsed". If a collapsed INTAKE HLA is found, replace all INTAKE HLAs on the suspect cylinder head. The noise can occur at low or high RPMs, and at low or high temperatures. There are no Diagnostic Trouble Codes (DTC)s present. CAUSE: INTAKE Hydraulic Lash Adjuster may have a manufacturing issue that can cause the plunger to stick, generating valvetrain noise.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).