Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

DodgeDodge Neon

1993–2005 · 3 generationen · 27 dokumentierte Mängel · 3 Märkte
Generationen
Modelljahr
MarktAlleNA
Neon II · 1999–2005
RückrufKritischElektrikNA

Electrical system:Starter assembly

Vehicle description: Passenger vehicles. Starter assemblies were built with suspect plastic terminal blocks which could develop stress cracks subsequent to their installation onto the body of the starter. Separation of the terminal block from the starter body could potentially allow the un-fused positive terminal to come into contact with an adjacent surface, providing a path to ground.

NHTSA · USA12. Dez. 200000V416000Modelljahre 2001Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Neon I · 1993–1999
RückrufMittelElektrikNA

Elektrik

Diese Fahrzeuge entsprechen nicht der c.M.V.S.S. 1103 – Abgasemissionen. Das Festkörper-Lüfterrelais könnte aufgrund einer wärmebedingten elektrischen Überlastung ausfallen, wodurch der/die Lüfter stehen bleiben und das Fahrzeug überhitzt. Sowohl die Emissionen als auch die Fahrbarkeit können beeinträchtigt werden, wenn das Fahrzeug überhitzt. Korrektur: Das Festkörperrelais wird ersetzt und im Lüfterverkabelungskreis wird ein Dioden-Überbrückungskabel installiert.

Transport Canada27. März 19981998053Modelljahre 1997–1998Automatisch übersetzt · Original: EnglischDetails ansehen →
Neon I · 1993–1999
RückrufMittelElektrikNA

Electrical

An engine wiring harness may short due to contact with the exhaust gas recirculation (egr) tube. Shorting of the harness may cause various electrical malfunctions, including engine die out. Correction: Wiring harness will be properly routed and any damaged wiring will be replaced.

Transport Canada12. Feb. 19961996029Modelljahre 1996Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Neon I · 1993–1999
RückrufMittelElektrikNA

Electrical

Vehicles may experience an engine die out due to moisture in the powertrain control module (pcm) caused by inadequate potting material sealing. Also, the rear brake lines may be out of position due to failure of the mounting bracket screws. Correction: Powertrain control module and rear brake line bracket screws will be replaced on affected vehicles.

Transport Canada21. Feb. 19941994038Modelljahre 1995Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).