On affected vehicles it may be possible that one or more engine camshaft roller finger followers were not properly installed at the time of assembly. An improperly installed camshaft roller finger follower may result in engine failure resulting in a no-start condition or a loss of motive power.
DVSA · Vereinigtes Königreich31. Aug. 2026R/2026/289Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ford Motor Company (Ford) ruft bestimmte Fahrzeuge der Modelle 2026 Explorer, Bronco, Bronco Sport, Mustang und Ranger zurück. Die Kolbenböden der Motoren könnten fehlerhaft hergestellt worden sein, was zum Versagen des Kolbenbodens und in der Folge zu einem Verlust der Antriebsleistung führen kann.
Ford Motor Company (Ford) is recalling certain 2025-2026 Explorer, Ranger, and Bronco vehicles. The engine may fail, which can result in a loss of drive power.
NHTSA · USA27. Mai 202626V343000Modelljahre 2025–2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ford Motor Company (Ford) ruft bestimmte Fahrzeuge der Modelle 2025 Ranger, Lincoln Nautilus, Mustang, Maverick, Explorer, Escape, Lincoln Corsair, Bronco Sport und Bronco zurück. Das Ventil für die Abgasrückführung (AGR) kann ausfallen, was zu einem unerwarteten Verlust der Antriebsleistung führen kann.
Les écrous reliant les lignes à haute pression entre la pompe à carburant et les buses d’injection peuvent ne pas avoir été correctement serrés. au fil du temps, ils pourraient se détacher, conduisant à une fuite de carburant. par conséquent, les fuites de diesel pourraient entrer en contact avec le collecteur d’échappement, le turbocompresseur ou le catalyseur, augmentant ainsi le risque d’incendie.
Safety Gate · EU · RappelConso · Frankreich16. Sept. 2025a12/00187/24Modelljahre 2022–2023Im Original (Französisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ford Motor Company (Ford) is recalling certain 2024 Bronco and Ranger vehicles. The bolts securing the high pressure fuel pump may not be tightened properly, which can result in a fuel leak.
Ford Motor Company (Ford) is recalling certain 2024 Ranger vehicles. The fuel vapor line bracket may have insufficient clearance to the fuel vapor line, which can result in fuel vapor line damage that can lead to a fuel vapor leak.
The nuts connecting the high-pressure lines between the fuel pump and the injector nozzles may not have been correctly tightened. Over time, they could become detached, leading to a fuel leak. Consequently, leaking diesel could come into contact with the exhaust manifold, the turbocharger, or the catalyst, thereby increasing the risk of fire.
Ranger vehicles where the High Pressure (HP) Pipes connecting with the Fuel Pump may not have been correctly tightened to specifications.� Incorrectly tightened HP Pipe joints/nuts may loosen over time resulting in a fuel leak.
Ford Motor Company (Ford) is recalling certain 2022 Explorer and Ranger vehicles equipped with 2.3L engines. The fuel line may be loose due to improper tightening of the fuel line connection.
Ford is recalling certain model year 2010 ford ranger trucks manufactured from october 15, 2009, through may19, 2010. The engine fuel line in the area of the throttle body shield may not have a protective convolute (cover) properly installed. If the protective convolute on the fuel line is not assembled in the proper position, the edge of the shield may contact the fuel line. Over time this contact may chafe the fuel line, resulting in a fuel odor and a potential fuel leak.
An "o" ring on the fuel injector damper assembly may have been damaged during assembly. This could result in a fuel leak. Fuel leakage, in the presence of an ignition source, could potentially result in a fire. Correction: Fuel injector damper assembly will be inspected and replaced if necessary.
Transport Canada8. Sept. 19981998175Modelljahre 1999Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Vehicle description: Light duty pickup trucks with 3.0l engine. An 'o'-ring seal in the fuel injection pulse damper to fuel rail joint could be damaged allowing fuel leakage.
The flexible section of the chassis mounted fuel line which connects to the engine may come in contact with the exhaust manifold. This could result in damage to the fuel line and a possible fuel leak. Fuel leakage in the presence of an ignition source could result in a fire. Correction: A clip will be installed to hold the fuel line in the intended design position.
Transport Canada30. Okt. 19971997189Modelljahre 1998Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Vehicle description: Light duty pickup trucks equipped with 4.0l engines. The flexible section of the chassis mounted fuel line that connects to the engine was routed too close to the exhaust manifold. The line could contact the manifold.
The flexible portion of the front fuel hose on these vehicles may be susceptible to cracking. Cracked fuel lines could cause fuel leakage, and in the presence of an ignition source, a fire could result. Correction: Front fuel lines will be inspected and, if necessary, replaced.
Transport Canada8. Juni 19941994110Modelljahre 1994Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Bei Fahrzeugen mit EFI oder CFI kann sich die Federring-Schnellkupplung der Kraftstoffleitung, die die Kraftstoffzufuhr- und Rücklaufleitungen mit den EFI-Kraftstoffverteilern bzw. den CFI-Drosselklappengehäusen verbindet, sowie andere Kraftstoffleitungsanschlüsse nahe der Armaturenbrettverkleidung bei einigen Fahrzeugen während des Fahrzeugbetriebs lösen. Tritt dies auf, kommt es zu einem Kraftstoffverlust, wodurch die Gefahr eines Fahrzeugbrands besteht.
Korrektur: Bei betroffenen Fahrzeugen werden Haltklammern für die Kupplungen installiert.
Hinweis: Escort-Fahrzeuge sind mit EFI und CFI ausgestattet. Lynx-Fahrzeuge sind nur mit CFI ausgestattet.
EFI – Elektronische Kraftstoffeinspritzung
CFI – Zentrale Kraftstoffeinspritzung
Vehicles equipped with 2.9 litre e.F.I.,v6 engines, there is a possibility that a nylon fuel line on the fuel return side of the fuel pressure regulator assembly may crack and leak fuel. In the presence of an ignition source, the potential for fire would exist.
Transport Canada25. Okt. 19851985116Modelljahre 1986Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Nylon fuel lines on the fuel return side of the fuel pressure regulator assembly may crack. Consequence of defect: Fuel line could leak and, if an ignition source is present, create the potential for a fire.
The nylon fuel supply and return lines are improperly routed along the frame side rail and could contact the universal joint on the front driveshaft. Consequence of defect: Such contact could cause abrasion of the lines and low pressure fuel leakage creating the potential for a fire.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).