Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
Bestimmte Fahrzeuge GV70 Electrified (JK1A EV) und G80 Electrified (RG3 EV) können beim Einschalten des Bereitschaftsmodus („Ready“) eine fehlerhafte Warnleuchte mit den Fehlercodes (Diagnostic Trouble Codes, DTC) U151A8C und/oder U151B8C anzeigen. Dieses Service-Bulletin beschreibt das Verfahren zur Aktualisierung der Software des Fahrzeugsteuergeräts (Vehicle Control Unit, VCU), um diesen Zustand zu beheben.
Certain GV70 (JK1) vehicles may experience an intermittent A/C inoperative condition when the engine is started after the air conditioner has been operated with the ignition switch in the ON position. During engine cranking, a temporary low-voltage condition may cause the blower motor protection logic to activate, resulting in the A/C system turning OFF and remaining inoperative until the vehicle is restarted. This bulletin provides the procedure to update the ATCU (Air Temperature Control Unit) software to revise blower motor protection logic and prevent this condition from occurring.
Certain GV70 Electrified (JK1A EV) vehicles may exhibit a Data Connectivity Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. This bulletin provides instructions to perform a software update for the DCU module.
Certain GV70 (JK1A) vehicles may exhibit a Data Connectivity Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. This bulletin provides instructions to perform a software update for the DCU module.
Certain 2026MY GV70 (JK1A) and 2026MY GV70 Electrified (JK1A) vehicles may exhibit a Data Communication Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. Technical Service Bulletins (TSBs) 26-01-017G-1 26-01-018G-1 provide instructions to perform a software update for the DCU module. Over-the-Air (OTA): This update can also be conducted via OTA. Guests cancomplete on their own if they have an active subscription to Genesis Connected Services. A visit to retailers is not required if the update is conducted via OTA.
Certain GV70 Electrified (JK1A EV) vehicles may exhibit a Data Communication Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. Technical Service Bulletin (TSB) 26-01-018G provides instructions to perform the software update for the DCU module.
Certain GV70 Electrified (JK1A EV) vehicles may exhibit a Data Communication Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. This bulletin provides instructions to perform a software update for the DCU module.
Certain GV70 (JK1A) vehicles may exhibit a Data Communication Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. Technical Service Bulletin (TSB) 26-01-017G provides instructions to perform the software update for the DCU module.
Certain GV70 (JK1A) vehicles may exhibit a Data Communication Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. This bulletin provides instructions to perform a software update for the DCU module.
Certain GV70 (JK1) vehicles may exhibit a Data Communication Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. This bulletin provides instructions to perform a software update for the DCU module.
Certain GV70 (JK1) vehicles may exhibit a Data Communication Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year.
Certain GV70 (JK1) vehicles may exhibit a Data Communication Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. This bulletin provides instructions to perform a software update for the DCU module.
Certain 2025MY GV70 (JK1A) vehicles may experience an illuminated check engine light for DTC P059A from a faulty connection due to improper soldering within the sensor components. This bulletin outlines the procedure to replace the active air flap (AAF) on-board diagnostic (OBD) sensors to resolve this issue.
Certain GV70 (JK1A) and GV70 Electrified (JK1A EV) vehicles may exhibit a display screen flickering or intermittently going blank. This may be due to the shield width of the coaxial cable being too wide, causing a loose connection. Follow the procedures in this bulletin to adjust the width of the shield using a supplied shield adjustment jig.
This bulletin provides information related to the ECM(Engine Control Module) software update for 3.5L GDI engine equipped vehicles that experience check engine light, no drivability issue, and with either of the following DTC found stored in the ECM: P2096 - Post Catalyst Fuel Trim - System Too Lean (Bank 1). P2098 - Post Catalyst Fuel Trim - System Too Lean (Bank 2).
This bulletin provides the procedure for updating the software of the Vehicle Charge Management System (VCMS) to improve charging. It may address an intermittent stops charging condition or the following EV Light On DTC condition: DTC P1ABD00 Battery Charger Coupler Temperature Too High
This bulletin provides information related to the ADAS Parking system software upgrade for certain 2023MY GV70(JK1) vehicles. The RSPA (Remote Smart Parking Assist) parallel parking function may not work properly. When the RSPA button is pressed inside the vehicle, the parallel park target position may not be identified. As a result, the RSPA system may cancel without any prompts. This service procedure provides the steps to perform a software update to the logic for the RSPA parallel parking function.
This bulletin provides information related to the ADAS Parking system software upgrade for certain 2023MY GV70(JK1) vehicles. The RSPA (Remote Smart Parking Assist) parallel parking function may not work properly. When the RSPA button is pressed inside the vehicle, the parallel park target position may not be identified. As a result, the RSPA system may cancel without any prompts. This service procedure provides the steps to perform a software update to the logic for the RSPA parallel parking function.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).