Bulletin
PSR-Passenger Airbag Inflator Weld May Fracture Upon Airbag Deployment
🔔 Kostenloses Konto anlegen und Benachrichtigungen zu GMC Sierra (alle generationen) erhalten
Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
PSR-Passenger Airbag Inflator Weld May Fracture Upon Airbag Deployment
PSR-Passenger Airbag Inflator Weld May Fracture Upon Airbag Deployment
PSR-Passenger Airbag Inflator Weld May Fracture Upon Airbag Deployment
This technical bulletin provides a procedure to replace the lower seat frame to correct the condition of Pop Noise Heard During Seat Travel and/or Inadequate Seat Rearward Travel due to a supplier installation error.
This technical bulletin provides a procedure to replace the lower seat frame to correct the condition of Pop Noise Heard During Seat Travel and/or Inadequate Seat Rearward Travel due to a supplier installation error.
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the airbag lamp illuminated on the driver?s information center (DIC).
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the airbag lamp illuminated on the driver?s information center (DIC).
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the airbag lamp illuminated on the driver?s information center (DIC).
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the airbag lamp illuminated on the driver?s information center (DIC).
Customer Satisfaction Program - Certain vehicles that had the front passenger seat cushion frame previously replaced, may not have had the adjuster stops transferred and are missing on the replacement part. The front passenger seat may be in a position beyond the occupant design travel range.Dealers are to inspect the front passenger seat tracks for the presence of both adjuster stops and install missing adjuster stops if necessary.
This Preliminary Information communication provides information to the technician about vehicle that may have a front driver's or passenger's seat back may lean or be turned outward. Technician will need to remove the seat bottom trim cover and reinstall it completely and squarely to the cushion to correct the concern.
17018-Customer Satisfaction Program. Certain vehicles, equipped with power front passenger seat adjuster that was previously replaced, may have a condition in which the front passenger seat can be adjusted to a position beyond the occupant design travel range. Dealers will inspect front passenger seat tracks and, as necessary, install the seat stop(s).
This Preliminary Information communication provides information to the technician about vehicles that may have Service messages in the Driver Information Center, Malfunction Indicator Lamp on, Erratic fluctuating engine oil pressure gauge, engine crank no start, and engine may run rough or misfire. Technician may find Diagnostic Trouble Codes. Technician should use published Service Information diagnostics for the Diagnostic Trouble Codes that are set. If the diagnosis does not lead to a resolution check for chafing of the engine wiring harness that is routed near the Exhaust Gas Recirculation Valve. Technician should repair any damaged wiring and fully seat the wire retaining harness. Also the technician should bend the Exhaust Gas Recirculation Valve gasket over to prevent a re-occurrence.
This informational bulletin provides an upate for Cause information on Airbag Warning Lamp Illumination Condition.
This Preliminary Information communication advises the technician that some vehicles the haptic seat motors can be felt in the seat. Technician will access both haptic seat motors and rotate the motors flat, and then reinstall them back into the seat cushion. This will help improve the comfort of the seat cushion.
This informational bulletin provides information to advise dealers about seat belt buckles not operating and/or seat belt warning light illumination, as well as difficulty latching and unlatching the buckle or the buckle release button sticking.
This Preliminary Information communication provides information to the technician about vehicle that may have a front driver's or passenger's seat back may lean or be turned outward. Technician will need to remove the seat bottom trim cover and reinstall it completely and squarely to the cushion to correct the concern.
This Preliminary Information communication provides information to the technician about vehicles that have an excessive lateral driver or passenger seat movement and/or a clunk/click/pop type feeling or noise. Technician will need to install a front seat lateral retainer. Technician will need to remove plastic material from the top side of the guide end of the lateral retainer to enable installation.
This Preliminary Information communication provides information to the technician about vehicles that have front driver?s or passenger?s seat cover/cushion is loose. Technician will need to install U-clips to help secure the cover to the seat frame.
This Preliminary Information communication provides information to the technician about vehicles that may have Service messages in the Driver Information Center, Malfunction Indicator Lamp on, Erratic fluctuating engine oil pressure gauge, engine crank no start, and engine may run rough or misfire. Technician may find Diagnostic Trouble Codes. Technician should use published Service Information diagnostics for the Diagnostic Trouble Codes that are set. If the diagnosis does not lead to a resolution check for chafing of the engine wiring harness that is routed near the Exhaust Gas Recirculation Valve. Technician should repair any damaged wiring and fully seat the wire retaining harness. Also the technician should bend the Exhaust Gas Recirculation Valve gasket over to prevent a re-occurrence.
This Preliminary Information communication provides information to the technician about vehicles that after installing the GM Accessory Heated Seat Kit, one or more of the following issues may be present the heated seat back and/or bottom turns off after approximately 30 seconds and after turning on the heated seat switch, the indicators remain on, but the seat is not heating. Technician may find Diagnostic Trouble Codes B1935 Sym 0E, B2180 Sym 0E, B2425 Sym 0D, and/or B2430 Sym 0D. Technician will need to inspect the accessory heated seat wiring harness and make sure the heater element connectors are installed correctly.
14166a - customer satisfaction (revised net item allowance). Certain vehicles have driver and passenger seat side impact airbag (siab) wiring harness connectors that may have high resistance. The vehicle sensing and diagnostic module (sdm) interprets the high resistance as a fault. A fault will illuminate the airbag readiness light and turn on a service air bag driver information center (dic) message. The fault and the warning indicators may be intermittent. Depending on the level of resistance, the siabs may not deploy in a crash. Remove the driver and passenger siab wiring harness connectors and install electrical jumper wires in their place.
14166 - customer satisfaction. Certain vehicles have driver and passenger seat side impact airbag (siab) wiring harness connectors that may have high resistance. The vehicle sensing and diagnostic module (sdm) interprets the high resistance as a fault. A fault will illuminate the airbag readiness light and turn on a service air bag driver information center (dic) message. The fault and the warning indicators may be intermittent. Depending on the level of resistance, the siabs may not deploy in a crash.
This informational bulletin provides information on locating and reconnecting airbag connectors that are not fully seated to correct a customer concern of an airbag warning lamp illuminated, or one, or more, airbag dtc(s) set.
Passenger Airbag Partial Deployment
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).