Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
15577 - customer satisfaction program (message only instructing dealers of process to order missing labels). Some vehicles have an incorrect electrical circuit label on the instrument panel left end cap cover that shows four incorrect fuse positions. This condition could lead to service confusion, and possible improper fuse installation. Fuses protect wiring circuits, and if a higher than required fuse is installed, the circuit wire may fault open or increased risk of fire may result.
15577 - customer satisfaction program. Vehicles have an incorrect electrical circuit label on the instrument panel left end cap cover that shows four incorrect fuse positions. This condition could lead to service confusion, and possible improper fuse installation. Fuses protect wiring circuits, and if a higher than required fuse is installed, the circuit wire may fault open or increased risk of fire may result. Dealers are to install a corrected label. Since a new label can be easily installed, and to reduce customer inconvenience, the label was sent directly to customers of record along with the installation instructions. Customers may install the label, or if they desire, they may bring the label to their dealer for installation at no charge.
Fixes to address reduced propulsion During the update process, your radio may stay on up to 5 minutes after you exit the vehicle. This is expected behavior when an update package is onboard the vehicle. Do not service your vehicle during installation.
We identified an issue within SPS that prevented the correct software to be loaded to these vehicles. As a result, we have re-opened these VINs. Please perform the ECM update again which will allow the remedy software to be installed. Then, submit a new claim with a new warranty claim code. If the claim has not been submitted yet, please perform the ECM update again prior to submitting the claim. Thank You.
This service bulletin provides a procedure to replace the FPDCM if found to cause customers concerns of Crank No Start, Stalling, Malfunction Indicator Lamp (MIL) Illuminated DTC P023F or P129F Set.
Great News! Your vehicle keeps getting better. This update contains a required software change to help improve the overall software update and diagnostics process. Be sure to install this update to be able to receive future software updates. Better Never Stops
This engineering information (EI) closure ends the need for gathering further information from technicians in regard to having Malfunction Indicator Lamp illuminated on Driver Information Center (DIC), vehicle may not start but does Crank and/or Randomly Stalling.
This service bulletin provides a procedure to replace the FPDCM if found to cause customers concerns of Crank No Start, Stalling, Malfunction Indicator Lamp (MIL) Illuminated DTC P023F or P129F Set.
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to having Malfunction Indicator Lamp illuminated on Driver Information Center (DIC), vehicle may not start but does Crank and/or Randomly Stalling.
This service bulletin provides repair information for Engine Wire Harness Chafing to correct customer concerns of IPC Gauges Sweep, IPC Warning Message, SES/Check Engine/MIL, No Start/ No Crank, Runs Rough, Stalls, Reduced Engine Power, Various DTCs.
This service bulletin provides service information for customer concerns of an in-tank fuel pump whining noise, engine hard to start and/or stalls and Malfunction Indicator Lamp (MIL) is illuminated that may be caused by gelling of fuel in cold temperatures.
This technical bulletin provides a procedure to test the intake manifold for any possible leaks that may cause the customers concern of a Malfunction Indicator Lamp (MIL) Illuminated - DTC P0172, P026D, P2459, and/or P2A00 Set.
This service bulletin provides repair information for Engine Wire Harness Chafing to correct customer concerns of IPC Gauges Sweep, IPC Warning Message, SES/Check Engine/MIL, No Start/ No Crank, Runs Rough, Stalls, Reduced Engine Power, Various DTCs.
This engineering information (EI) closure ends the need to gather further information from technicians in regard to having a No Crank, No Start, Check Engine Lamp illuminated on Driver Information Center (DIC), DTC P062B Set.
Customer Satisfaction Program - Certain vehicles may have a standard sill plate installed in the cargo area but were invoiced for a lighted sill plate. Dealers will provide the customer with a reimbursement check in the amount of $495.00 USD.
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regard to having a No Crank, No Start, Check Engine Lamp illuminated on Driver Information Center (DIC), DTC P062B Set.
This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that have a no crank or a start and then immediate stall, Service Engine Soon Malfunction Indicator lamp may not be on when the ignition is in the run position. Technician may find Diagnostic Trouble Codes P0513 and or P262B may also be set. Technician will pulled the driver sill plate and inspect the wiring for damaged or corroded circuits. Technician will repair any damaged or corroded circuits.
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards No Crank, No Start, Engine Runs Rough, Vehicle Stalls and/or Reduced Engine Power (REP), Service Engine Soon (SES) and/or Malfunction Indicator Lamp (MIL) Illuminated on Driver Information Center (DIC), Multiple DTCs Set.
Emission Recall. General Motors has decided to conduct a voluntary emissions recall involving certain vehicles equipped with a performance air intake system (LPO RVK or 5W7). The Engine Control Module (ECM) may not have been programmed with the calibrations appropriate for the performance air intake system installed on the engine in these vehicles. Dealers will reprogram the ECM.
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to one or more of the following condition Stalls, Crank with no star, Check Engine Lamp illuminated on the Driver Information Center (DIC).
Service Update. On certain vehicles the clamp may not be properly aligned and positioned on the hose, or the hose is rolled over on the pump port. The improper assembly can quickly develop into a significant leak early in the truck?s life. As the coolant level drops, a Low Coolant Warning or potential for engine overheat with DIC message is possible. Dealers are to inspect for both the vertical and horizontal hose at the auxiliary coolant pump, and repair as needed.
Service Update - Certain 2021 vehicles have a condition where, if an over the air (OTA) update was sent to an affected vehicle, the update would fail. Customers will see the update is available, but after accepting and attempting to install, they will receive an update failed message. Dealers will replace the radio.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).