Bulletin
This service bulletin provides information on the restraint warning lamp being illuminated and the correction to this by replacing the passenger presence module.
🔔 Kostenloses Konto anlegen und Benachrichtigungen zu GMC Suburban (alle generationen) erhalten
Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
This service bulletin provides information on the restraint warning lamp being illuminated and the correction to this by replacing the passenger presence module.
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the airbag lamp illuminated on the driver?s information center (DIC).
Customer Satisfaction Program. In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
Customer Satisfaction Program (Revised Correction, Service Procedure and Warranty Information). In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
Customer Satisfaction Program (VINS re-opened, software updated). In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
Customer Satisfaction Program (Revised Service Procedure and Part Ordering Information). In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
Customer Satisfaction Program (Revised Service Procedure and Part Ordering Information). In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
Customer Satisfaction Program. In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
Customer Satisfaction Program (Revised Correction, Service Procedure and Warranty Information). In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle's driver information center will display a "Service Restraints System" message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
Customer Satisfaction Program. In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
Customer Satisfaction Program (Revised Correction, Service Procedure and Warranty Information). In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
Customer Satisfaction Program (Revised Service Procedure and Part Ordering Information). In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
This Preliminary information communicates an issue with the3rd Row Seat Headrestnot returning to the upright position after cycling the seat and to install a headrest repair kit.
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the airbag lamp illuminated on the driver?s information center (DIC).
Customer Satisfaction Program (Revised Correction, Service Procedure and Warranty Information). In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
Customer Satisfaction Program (Revised Service Procedure and Part Ordering Information). In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
Customer Satisfaction Program. In certain vehicles, driver movement can disrupt the electrical connection to the seat-mounted inboard airbag system. This airbag system is supplemental and not required equipment under applicable Federal Motor Vehicle Safety Standards. If this occurs, the vehicle?s driver information center will display a ?Service Restraints System? message to the driver before resistance at the connection will prevent the deployment of the airbag. Dealers are to verify the DTC B14DC is present and replace the affected driver inboard side seat wiring harness connector assembly as necessary.
This Preliminary information communicates an issue with the3rd Row Seat Headrestnot returning to the upright position after cycling the seat and to install a headrest repair kit.
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the airbag lamp illuminated on the driver?s information center (DIC).
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the airbag lamp illuminated on the driver?s information center (DIC).
This Preliminary information communicates an issue with the3rd Row Seat Headrestnot returning to the upright position after cycling the seat and to install a headrest repair kit.
This Preliminary information communicates an issue with the3rd Row Seat Headrestnot returning to the upright position after cycling the seat and to install a headrest repair kit.
This Preliminary Information communication provides information to the technician about vehicle that may have a front driver's or passenger's seat back may lean or be turned outward. Technician will need to remove the seat bottom trim cover and reinstall it completely and squarely to the cushion to correct the concern.
This informational bulletin provides an upate for Cause information on Airbag Warning Lamp Illumination Condition.
This Preliminary Information communication advises the technician that some vehicles the haptic seat motors can be felt in the seat. Technician will access both haptic seat motors and rotate the motors flat, and then reinstall them back into the seat cushion. This will help improve the comfort of the seat cushion.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).