Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Hyundai Excel

1985–1994 · 2 generationen · 28 dokumentierte Mängel · 3 Märkte
Generationen
Modelljahr
MarktAlleNA
Excel I · 1985–1990Excel II · 1989–1994
RückrufKritischMotorNA

Kraftstoffsystem, Benzin

Die Fahrzeuge haben die Anforderungen des seitlichen Hindernis-Aufprallversuchs (lateral moving barrier impact test) gemäß FMVSS 301, „Fuel System Integrity“, nicht erfüllt. Der Kraftstoffaustritt aus dem Tank überschritt die maximal zulässige Menge an Verschüttung.

NHTSA · USA23. Nov. 199393V192000Modelljahre 1990–1994Automatisch übersetzt · Original: EnglischDetails ansehen →
Excel I · 1985–1990
RückrufKritischMotorNA

Engine

Note: All 1988-89 excel vehicles sold in canada. The reed valve subassembly contained within the air control valve could fail due to corrosion allowing the hot exhaust gases to flow backward into the plastic secondary air filter case when the vehicle is being driven. These hot gases may melt the secondary air filter case and could result in an engine compartment fire. Correction: Reed valve subassembly will be replaced.

Transport Canada30. Dez. 19911991176Modelljahre 1988–1989Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Excel I · 1985–1990
RückrufKritischMotorNA

Fuel System

The fuel return tube clip may have been incorrectly installed allowing the fuel return hose to contact either the distributor high tension cable or the e.G.R. Valve. This could, over time, result in wear and eventual leakage at the fuel hose. The fuel leakage could result in an underhood fire. V.I.N. Range s.O.P. To kmhla31j1gu040086

Transport Canada18. Apr. 19861986044Modelljahre 1986Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Excel I · 1985–1990
RückrufMittelMotorNA

Engine and engine cooling:Exhaust system

Deterioration of the reed valve subassembly may lead to a malfunction within the secondary air supply portion of the emission control system. The screws which attach the reeds to the reed valve subassembly may rust, and if the rusting becomes severe, the screw heads will erode and allow the reeds to separate from the reed valve subassembly. Corrosion may also occur on the reed valve subassembly, deforming the reed seats and preventing the reeds from closing properly. Separation of the reeds from the reed valve subassembly or improper closing of the reeds allow hot exhaust gases to flow backward into the plastic secondary air filter case when the vehicle is being driven. These hot exhaust gases may melt the secondary plastic air filter case.

NHTSA · USA31. Dez. 199191V225000Modelljahre 1986–1989Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).