Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Mazda MX-30

2020– · 1 generationen · 1 dokumentierte Mängel · 4 Märkte
Generationen
Alle GenerationenMX-302020–19123

Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.

SchweregradAlleMittelGering
Modelljahr
BulletinMittelSonstigesNA

Bulletin

Some customers may complain that Mazda Connect does not start (blank screen) or that it takes a long time to restart/ reboot after starting the vehicle. This is caused by the initialization process with the CMU failing at startup due to a defective circuit board element. To eliminate this concern, the internal hardware (DRAM) of the CMU has been improved.

NHTSA · Herstellerbulletin10237206Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelSonstigesNA

Bulletin

Some customers may complain that Mazda Connect does not start (blank screen) or that it takes a long time to restart/ reboot after starting the vehicle. This is caused by the initialization process with the CMU failing at startup due to a defective circuit board element. To eliminate this concern, the internal hardware (DRAM) of the CMU has been improved.

NHTSA · Herstellerbulletin10233569Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinMittelSonstigesNA

Bulletin

Einige Kunden können sich beschweren, dass Mazda Connect nicht startet (schwarzer Bildschirm) oder dass es nach dem Starten des Fahrzeugs lange dauert, bis es neu startet bzw. neu hochfährt. Ursache ist, dass der Initialisierungsvorgang des CMU beim Start aufgrund eines defekten Leiterplattenbauteils fehlschlägt. Um dieses Problem zu beseitigen, wurde die interne Hardware (DRAM) des CMU verbessert.

NHTSA · Herstellerbulletin10226898Modelljahre 2022Automatisch übersetzt · Original: EnglischDetails ansehen →
BulletinMittelSonstigesNA

Bulletin

Some customers may complain that Mazda Connect does not start or that it takes a long time to restart after starting the vehicle. This is caused by the initialization process with the CMU failing at startup due to a defective circuit board element. To eliminate this concern, the internal hardware of the CMU has been improved.

NHTSA · Herstellerbulletin10218768Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

When encountering a vehicle with paint damage, refer to the "Mazda Paint Warranty Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).

NHTSA · Herstellerbulletin10252504Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.

NHTSA · Herstellerbulletin10251387Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated.

NHTSA · Herstellerbulletin10235700Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

In-Vehicle Network Malfunction error message. DTC U3000:04 (Telematics communication unit internal malfunction) stored. NOTE: The vehicle does not apply to 09-001/23 because CSP04 is not "OPEN".

NHTSA · Herstellerbulletin10235699Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

Some customers may report an odor or water in the HVAC system and upon inspection, the cabin air filter may be found to be wet.

NHTSA · Herstellerbulletin10233704Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

Mazda Connect Services - Frequently Asked Questions (FAQ)

NHTSA · Herstellerbulletin10233674Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

Due to the supply chain shortages for BDGF-66-5G0G, hardware has been confirmed compatible between BDGF-66-5G0B up to the G suffix. This can be used for repair with vehicles originally equipped with C to G level suffix parts.

NHTSA · Herstellerbulletin10230866Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.

NHTSA · Herstellerbulletin10228650Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

Some customers may complain that the HVAC system's touch panel switches settings on it's own. When you receive a customer complaint regarding this concern, explain the following characteristics of the touch panel to the customer. The MX-30 heater control unit uses a capacitive touch screen which may determine that a switch has been pressed because of the close proximity of a hand, even though it has not been touched directly. No repair is necessary unless you confirm abnormal operation different from the description. NOTE: The heater control units operation confirmation sound does not sound if there is another warning or confirmation sound of another system at the same time. Since the confirmation sound of the heater control unit is missing in this special case, some customers may feel that the heater control settings have switched by themselves.

NHTSA · Herstellerbulletin10226922Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.

NHTSA · Herstellerbulletin10225720Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

Mazda Connected Services Frequently Asked Questions (FAQs)

NHTSA · Herstellerbulletin10225730Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.

NHTSA · Herstellerbulletin10222553Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.

NHTSA · Herstellerbulletin10219229Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.

NHTSA · Herstellerbulletin10215015Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.

NHTSA · Herstellerbulletin10213125Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

Mazda Connected Services Frequently Asked Questions (FAQs)

NHTSA · Herstellerbulletin10213140Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated.

NHTSA · Herstellerbulletin10213148Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.

NHTSA · Herstellerbulletin10210844Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method B. Auxiliary Key Code Cut Method

NHTSA · Herstellerbulletin10210847Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

If both auxiliary keys are lost, the key cutting machines cannot cut new replacement keys using the vehicle key code.

NHTSA · Herstellerbulletin10210846Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
BulletinGeringSonstigesNA

Bulletin

Mazda Connected Services Frequently Asked Questions (FAQ).

NHTSA · Herstellerbulletin10210879Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ältere →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).