Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)
AnmeldenKonto erstellen
NANHTSA · Herstellerbulletin11008712

Technische Bulletins

Im Original (Englisch) angezeigt · Übersetzung ausstehend

Complaint Check engine light on. One of the below fault codes is current in the engine control module (N3/10). P04DB29, P04DB31, P04DB79 Cause Open circuit or high resistance to crankcase vent line contact Remedy 1. Check the electrical connector for the relevant vent line contact switch noted below. Refer to attached photos of connection locations. 2. Ensure the bolted connection is secure and bolt can be torqued (9Nm). 3. Check continuity from vent line connection to ME control unit. Repair wire if damage is found. The circuit from ME provides 5V and is pulled to 0V when the ground connection is intact. M260 P04DB31- S88/15 P04DB79- S88/16 M264 P04DB31- S88/15 P04DB79- S88/16 P04DB29- S88/17 M270/M274 P04DB79- S88/5 Note: This repair is not warrantable if the connection was left loose during previous repair/maintenance.

Betrifft: Mercedes-Benz A-Class III (Modelljahre 2018) · Mercedes-Benz C-Class W205 (Modelljahre 2018–2020) · Mercedes-Benz CLA-Class I (Modelljahre 2019) · Mercedes-Benz E-Class V213 (Modelljahre 2021) · Mercedes-Benz GLC I (Modelljahre 2019) · Mercedes-Benz GLE-Class GLE (W167/C167) (Modelljahre 2020) · Mercedes-Benz SLK-Class R172 (Modelljahre 2016–2017)

Offizielle Meldung ↗

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).