Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)
AnmeldenKonto erstellen
NANHTSA · Herstellerbulletin11033334

Technische Bulletins

Im Original (Englisch) angezeigt · Übersetzung ausstehend

Park Assist Sensor 3 and 4 Harness Swap This bulletin provides information regarding the wire harness connectors for Park Assist Sensors #3 and #4. The harnesses for these sensors are visually identical and may have been interchanged during vehicleassembly. If diagnosis indicates a concern related to Park Assist Sensors #3 or #4, or associated wiring, visually inspect the harness connections to verify correct installation before proceeding with further repair Fig. 1. If the connectors are found to be swapped, release the harnesses from the retaining clips as necessary, disconnect, and reinstall each connector to the correct sensor location. Ensure harnesses are properly secured after repositioning.

Betrifft: Dodge Ram IV (2009) (Modelljahre 2026)

Offizielle Meldung ↗

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).