Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)
AnmeldenKonto erstellen
NANHTSA · Herstellerbulletin11037987

Technische Bulletins

Im Original (Englisch) angezeigt · Übersetzung ausstehend

Complaint Only vehicles with a variable transfer case are affected. This can be identified through control unit N45 or N15/7 in the quick test. When accelerating with light load, vibrations or jolting sensation may come from the drivetrain. It may be mistaken for a harsh shift. Cause Modified oil quality of the transfer case over time Remedy 1. Check initial quick test for faults in the following control units. N45 or N15/7 Allwheel drive (ARS) N127 'Drivetrain' (PTCU) control unit Y3/8 Transmission control for 9gear transmission (VGS) N3/10 Engine electronics for combustion engine If faults are present: Process them as per the guided test in Xentry. If no faults are present: 2. Check the transmission oil level If the oil level is correct: 3. Unplug the connector for the transfer cases control unit and reassess the vehicle on a subsequent test drive If the complaint no longer occurs with the control unit disconnected: 4. Perform an oil change of the transfer case according to WIS specifications Collect an oil sample of the original fluid 5. Complete all transfer case Techin processes located under VG Control Unit > Adaptations Resetting the oil service data Calibration of N15/7 5. Perform road test of vehicle to bring transmission to operating temperature (>60C ) 6. Operate vehicle in full circle with steering at full lock 5x to the left 5x to the right Return the vehicle to the client and request they drive the vehicle for at least 200 miles and return if the concern is not resolved. The extended drive will ensure the clutches are properly conditioned with the new oil and should resolve the concern. If this LI has already been applied to the vehicle, please submit a TIPS case to the Powertrain inbox with the following information: Initial quick test with fault freeze frame data Initial transmission EEPROM data VGS and Transfer Case Control Unit Log (N45 or N15/7) Special Acquisition Data .txt file (Transfer Case Control Unit > Special Procedures > Procedures for support queries to market support > Special Data Acquisition) Photo of the original oil condition What color was the fluid drained from the transfer case before the oil change? Was an oil sample collected, and can you provide a photo of the original fluid? What color and part number fluid was used during the oil change? How far was the vehicle driven after?

Betrifft: Mercedes-Benz C-Class W205 (Modelljahre 2018) · Mercedes-Benz E-Class W212 (Modelljahre 2015) · Mercedes-Benz E-Class V213 (Modelljahre 2018–2023) · Mercedes-Benz GLC II (Modelljahre 2023) · Mercedes-Benz GLE-Class M-Class/GLE (W166/C292) (Modelljahre 2015–2016) · Mercedes-Benz GLE-Class GLE (W167/C167) (Modelljahre 2023–2025) · Mercedes-Benz GT II (Modelljahre 2024–2025) · Mercedes-Benz S-Class W222 (Modelljahre 2016–2017) · Mercedes-Benz S-Class VII (W223) (Modelljahre 2021) · Mercedes-Benz SL-Class R231 (Modelljahre 2017) · Mercedes-Benz SLK-Class R172 (Modelljahre 2016–2017) · Mercedes-Benz X166 (Modelljahre 2017)

Offizielle Meldung ↗

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).