Some 2019 Mustang, Continental, Fusion, MKZ, F150, Transit Connect, Ranger, Edge or Nautilus with SYNC 3 may have the following intermittent symptoms: a solid blue screen when moving forward at speeds above 10 mph, the rear view camera remains on the screen at speeds below 10 mph, or inoperative infotainment applications. To resolve this concern, check for a SYNC software update under the OASIS Tab SYNC selection. If an update is available, update the APIM software per WSM section 415-00. After the complete pop-up appears, remove the USB flash drive and install it into the IDS tool to update the Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes, which is critical for a successful installation. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual.
NANHTSA · Herstellerbulletin10156564
Technische Bulletins
Im Original (Englisch) angezeigt · Übersetzung ausstehend
Betrifft: Ford Edge II (2010) (Modelljahre 2019) · Ford F-Series thirteenth generation (Modelljahre 2019) · Ford Mondeo 4th generation (Modelljahre 2019) · Ford Mustang VI (Modelljahre 2019) · Lincoln Continental X (Modelljahre 2019) · Lincoln MKX II (Modelljahre 2019) · Lincoln MKZ II (2013) (Modelljahre 2019) · Ford Transit Connect II (2013) (Modelljahre 2019)
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).