Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Ram ProMaster

1981– · 3 generationen · 8 dokumentierte Mängel · 3 Märkte
Generationen

Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.

SchweregradAlleMittelGering
Modelljahr
MarktAlleNA
ProMaster III · 2006–
BulletinMittelMotorNA

Bulletin

Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.

NHTSA · Herstellerbulletin10230180Modelljahre 2015–2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
ProMaster III · 2006–
BulletinMittelMotorNA

Bulletin

Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.

NHTSA · Herstellerbulletin10221594Modelljahre 2015–2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
ProMaster III · 2006–
BulletinMittelMotorNA

Bulletin

Valve Cover Gasket It is advised to replace the full valve cover assembly if you are experiencing a valve cover leak Engineering has updated the skirt height of the valve cover to address oil leaks. Replace the valve cover (part # 04893800AI (right side) or 04893799AH (left side)includes valve cover gasket) to ensure proper repair. Please call FCA Redacted Content to facilitate fast track shipment of failed part.

NHTSA · Herstellerbulletin10221366Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
ProMaster III · 2006–
BulletinMittelMotorNA

Bulletin

Valve Cover Gasket If you are experiencing a right valve cover leak and plan on replacing only the gasket, the customer may later return for an oil leak. Engineering has updated the skirt height of the valve cover to address oil leaks. Replace the valve cover (part # 04893800AI includes valve cover gasket) to ensure proper repair. Please call FCA Redacted Content if further questions or help is needed with parts retention returns on valve cover assemblies

NHTSA · Herstellerbulletin10214518Modelljahre 2022Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
ProMaster III · 2006–
BulletinMittelMotorNA

Bulletin

Customer complaint may include engine oil leak/consumption.

NHTSA · Herstellerbulletin10190667Modelljahre 2015–2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
ProMaster III · 2006–
BulletinMittelMotorNA

Bulletin

RADIATOR, Engine Cooling For radiator leak concerns, please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair. Please email VIN, dealer code, mileage and picture of the leak to: FCA Redacted Content; FCA Redacted Content

NHTSA · Herstellerbulletin10175430Modelljahre 2019Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
ProMaster III · 2006–
BulletinMittelMotorNA

Bulletin

RADIATOR, Engine Cooling For radiator leak concerns, please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair. Please email VIN, dealer code, mileage and picture of the leak to: FCA Redacted Content; FCA Redacted Content

NHTSA · Herstellerbulletin10175018Modelljahre 2019Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
ProMaster III · 2006–
BulletinMittelMotorNA

Bulletin

RADIATOR, Engine Cooling For radiator leak concerns, please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair. Please email VIN, dealer code, mileage and picture of the leak to: FCA Redacted Content; FCA Redacted Content

NHTSA · Herstellerbulletin10174098Modelljahre 2019Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
ProMaster III · 2006–
BulletinMittelMotorNA

Bulletin

Customer Satisfaction Notification T12 VECI Label The Vehicle Emission Control Information (VECI) label on about 120,000 of the above vehicles may be missing emission control information. The VECI label is often used during in-use Inspection and Maintenance (I/M) testing to verify proper emissions related components. Incorrect VECI label information could result in denial of vehicle registration for the vehicle in the state of California. A new VECI label must be installed.

NHTSA · Herstellerbulletin10224875Modelljahre 2015Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
ProMaster III · 2006–
BulletinMittelMotorNA

Bulletin

Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 Nm [21 ft. lbs.].

NHTSA · Herstellerbulletin10223854Modelljahre 2015–2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
ProMaster III · 2006–
BulletinMittelMotorNA

Bulletin

Replace Vehicle Emission Certification Information Label This bulletin involves replacing the Vehicle Emission Certification Information (VECI) Label.Owner may be turned away from Inspection and Maintenance (IM) station or fail IM testing because of missing emission components on VECI label. The customer may notice that some info is missing on their VECI labels.is missing. If information is shown in this area, do not replace the label.All vehicles were built with the correct emission components installed and there is no impact on emission performance or drivability.

NHTSA · Herstellerbulletin10223853Modelljahre 2015Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
ProMaster III · 2006–
BulletinMittelMotorNA

Bulletin

Pentastar Oil Filter Adapter: Before replacing this part, please call any one of the following people. Engineering is seeking information regarding this part.~ Dye must be used to determine where the leak is coming from before replacing. Also please check the recently updated Service Bulletin Number 09-008-15. ~ First: Nick Morand Cell (248) 410-8078 - Nick.morand@fcagroup.com Second: Bob Jackson Cell (248) 944-0466 - bob.jackson@fcagroup.com Third: Joe Lovell Cell (734 309-6467 - joe.lovell@fcagroup.com If a response is not received within 15 mins, then proceed with the necessary repair.~

NHTSA · Herstellerbulletin10218248Modelljahre 2015Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
ProMaster III · 2006–
BulletinMittelMotorNA

Bulletin

RADIATOR, Engine Cooling For radiator leak concerns, please email a picture of the leak area to: javier.calderon@fcagroup.com

NHTSA · Herstellerbulletin10166543Modelljahre 2019Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
ProMaster III · 2006–
BulletinMittelMotorNA

Bulletin

ADAPTER, Engine Oil Filter (Pentastar V6) Engineering is seeking information regarding OFA leaks. Questions/info can be directed to: Bob Jackson (248) 944-0466 - bob.jackson@fcagroup.com Ron Dallison (248-292-9510) ron.dallison@fcagroup.com Joe Lovell (734) 309-6467 - joe.lovell@fcagroup.com If no response in 15 minutes, proceed with repair. All vehicles equipped with a 3.2L or 3.6L except for model year 2014 vehicles with leak concern: 1) Ensure the Oil Filter Adapter (OFA) Cap O-ring is seated in the proper groove in the cap and not damaged or cut. 2) If replacing the (OFA) due to a leak detected between (OFA) and block. Ensure the torque on the 5 bolts are torqued to 12nm. If not record the actual values, torque to 12nm and contact the FCA employees listed below. 3) Remove the (OFA) and replace the O-ring and gaskets only (Kit #68191356A$), NOT THE OFA. 4) If oil was drained, add oil dye to ensure the leak is repaired. For model year 2014 vehicles replace the Oil Filter Adaptor.

NHTSA · Herstellerbulletin10162477Modelljahre 2015–2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
ProMaster III · 2006–
BulletinMittelMotorNA

Bulletin

Pentastar Oil Filter Adapter: Before replacing this part, please call any one of the following people. Engineering is seeking information regarding this part.~ Dye must be used to determine where the leak is coming from before replacing. Also please check the recently updated Service Bulletin Number 09-008-15. ~ First: Nick Morand Cell (248) 410-8078 - Nick.morand@fcagroup.com Second: Bob Jackson Cell (248) 944-0466 - bob.jackson@fcagroup.com Third: Joe Lovell Cell (734 309-6467 - joe.lovell@fcagroup.com If a response is not received within 15 mins, then proceed with the necessary repair.~

NHTSA · Herstellerbulletin10139934Modelljahre 2015Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
ProMaster III · 2006–
BulletinMittelMotorNA

Bulletin

Pentastar Oil Filter Adapter All vehicles equipped with a 3.2L or 3.6L engine; If replacing the Oil Filter Adapter (OFA) due to a leak detected between OFA and block, an O-ring kit (68191356AA) is now available to repair OFA/Block Interface leaks. Using dye will assist in determining source of leak. Ensure OFA Cap Oring is seated in the proper groove in the cap and not damaged or cut. Engineering is seeking information regarding OFA leaks. Questions/info can be directed to: Bob Jackson Cell (248) 944-0466 - bob.jackson@fcagroup.com Ron Dallison Cell (248-292-9510) ron.dallison@fcagroup.com Joe Lovell Cell (734) 309-6467 - joe.lovell@fcagroup.com If a response is not received within 15 mins, then proceed with the necessary repair.

NHTSA · Herstellerbulletin10138863Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
ProMaster III · 2006–
BulletinMittelMotorNA

Bulletin

Replace Vehicle Emission Certification Information Label This bulletin involves replacing the Vehicle Emission Certification Information (VECI) Label.Owner may be turned away from Inspection and Maintenance (IM) station or fail IM testing because of missing emission components on VECI label. The customer may notice that some info is missing on their VECI labels.is missing. If information is shown in this area, do not replace the label.All vehicles were built with the correct emission components installed and there is no impact on emission performance or drivability.

NHTSA · Herstellerbulletin10121890Modelljahre 2015Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
ProMaster III · 2006–
BulletinMittelMotorNA

Bulletin

"pentastar oil filter adapter before replacing this part, please call any one of the following people. Engineering is seeking information regarding this part.~ dye must be used to determine where the leak is coming from before replacing. Also please check the recently updated service bulletin number 09-008-15. ~ first: Nick morand cell (248) 410-5078 - nick.Morand@fcagroup.Com second: Bob jackson cell (248) 944-0466 - bob.Jackson@fcagroup.Com third: Joe lovell cell (734 309-6467 - joe.Lovell@fcagroup.Com if a response is not received within 15 mins, then proceed with the necessary repair."

NHTSA · Herstellerbulletin10080203Modelljahre 2015Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
ProMaster III · 2006–
BulletinGeringMotorNA

Bulletin

PSU Oil Pump Assy

NHTSA · Herstellerbulletin10248966Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
ProMaster III · 2006–
BulletinGeringMotorNA

Bulletin

Water Quality When Mixed With Engine Coolant

NHTSA · Herstellerbulletin10239957Modelljahre 2023Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
ProMaster III · 2006–
BulletinGeringMotorNA

Bulletin

Emission Recall U90 Catalyst Efficiency

NHTSA · Herstellerbulletin10229778Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
ProMaster III · 2006–
BulletinGeringMotorNA

Bulletin

Wenn kein Mopar-Ölfilter verfügbar ist, verwenden Sie einen Filter, der die Spezifikation USCAR36 erfüllt oder übertrifft und mit teil- und vollsynthetischen Motorölen kompatibel ist.

NHTSA · Herstellerbulletin10227983Modelljahre 2015–2016Automatisch übersetzt · Original: EnglischDetails ansehen →
ProMaster III · 2006–
BulletinGeringMotorNA

Bulletin

Emission Recall U90 Catalyst Efficiency

NHTSA · Herstellerbulletin10227727Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
ProMaster III · 2006–
BulletinGeringMotorNA

Bulletin

Emissions Recall U90 Catalyst Efficiency

NHTSA · Herstellerbulletin10226018Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
ProMaster III · 2006–
BulletinGeringMotorNA

Bulletin

Engine Mount Bracket If replacing engine mounts and vehicle is equipped with pivot bracket 68157407AA or torque strut 68157408AA you must REPLACE WITH A NEW ISOLATOR 68157408AB OR NEWER AND BOLT 06511657AA. ALSO REPLACE THE TORQUE STRUT BRACKET WITH 68157407AB OR NEWER & 3 NEW BOLTS 06504013. Please note that the AA and AB levels are NOT interchangeable

NHTSA · Herstellerbulletin10222881Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ältere →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).