Bulletin
Certain Model 3 vehicles might have too few HV battery positive contactor mounting nuts installed, which can allow movement that might affect the conductivity of the contactor terminals.
🔔 Kostenloses Konto anlegen und Benachrichtigungen zu Tesla 3 erhalten
Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
Certain Model 3 vehicles might have too few HV battery positive contactor mounting nuts installed, which can allow movement that might affect the conductivity of the contactor terminals.
Certain Model 3 vehicles might have too few HV battery positive contactor mounting nuts installed, which can allow movement that might affect the conductivity of the contactor terminals.
Certain Model 3 vehicles might have too few HV battery positive contactor mounting nuts installed, which can allow movement that might affect the conductivity of the contactor terminals.
Certain Model 3 vehicles might have too few HV battery positive contactor mounting nuts installed, which can allow movement that might affect the conductivity of the contactor terminals.
Certain Model 3 vehicles might have too few HV battery positive contactor mounting nuts installed. Too few mounting nuts allow movement that might affect the conductivity of the contactor terminals.
Certain Model 3 and Model Y vehicles were manufactured with High Voltage (HV) batteries containing cell modules that do not meet Teslas internal quality standards, potentially resulting in a reduction of range.
On some 2024+ Model 3 vehicles built at Fremont, a rattling noise may be noticed from the driver and/or front passenger instrument panel air vent while the face-level air vents are directed to straight ahead air flow.
On some 2024+ Model 3 built at Fremont, a rattling noise may be noticed from the driver and/or front passenger instrument panel air vent while the face-level air vents are directed to straight ahead air flow.
On certain Model 3 vehicles, the rear drive unit HV header bolts and the positive contactor bolt within the High Voltage (HV) battery ancillary bay were insufficiently torqued to internal specifications during manufacturing.
On certain Model 3 vehicles, the positive busbar nut under the power conversion system and additional bolts within the High Voltage (HV) battery ancillary bay were insufficiently torqued during manufacturing.
Certain Model 3 vehicles were configured with incorrect shunt resistance values that can affect charging capacity and range performance.
Certain Model 3 and Model Y vehicles may require HV battery replacement because the wire bonds within their HV batteries may not have been manufactured to internal specifications, which may result in a reduction of range.
On certain Model S, Model X, and Fremont-built Model 3 vehicles, the Printed Circuit Board (PCB) for the LH side repeater camera may lose electrical continuity over time, resulting in premature failure of the camera.
Certain Model 3 and Model Y vehicles were manufactured with high voltage (HV) batteries having cell separators that do not meet Tesla?s internal standards of quality, potentially resulting in a reduction of range.
On certain Model S, Model X, and Fremont-built Model 3 vehicles, the Printed Circuit Board (PCB) for the RH side repeater camera may lose electrical continuity over time, resulting in premature failure of the camera.
On certain Model S, Model X, and Fremont-built Model 3 vehicles, the Printed Circuit Board (PCB) for the LH and RH side repeater cameras may lose electrical continuity over time, resulting in premature failure of the cameras.
On certain Model S, Model X, and Fremont-built Model 3 vehicles, the Printed Circuit Board (PCB) for the LH side repeater camera may lose electrical continuity over time, resulting in premature failure of the camera.
Bestimmte Fahrzeuge der Modelle Model 3 und Model Y wurden mit Hochvolt-Batterien (HV) gefertigt, deren Zellseparatoren nicht den internen Qualitätsstandards von Tesla entsprechen, was möglicherweise zu einer Reduzierung der Reichweite führen kann.
On certain Model S, Model X, and Fremont-built Model 3 vehicles, the Printed Circuit Board (PCB) for the RH side repeater camera may lose electrical continuity over time, resulting in premature failure of the camera.
Certain Model 3 and Model Y vehicles may have a loosened fastener inside the HV battery assembly, which could cause the HV battery to power down.
Bei bestimmten Fahrzeugen des Model 3 wird das Bild der nach hinten gerichteten Kamera möglicherweise nicht auf dem Touchscreen angezeigt.
Bestimmte Fahrzeuge des Model 3 wurden mit falschen Hexadezimalwerten für den Shunt-Widerstand konfiguriert, was die Ladekapazität und die Reichweitenleistung beeinträchtigen kann.
On certain Model 3 vehicles, the LH side of the 12V battery bracket support might come loose due to improper welds during manufacture.
Certain Model 3, Model S, and Model X vehicles were equipped with 2nd generation Universal Mobile Connector (UMC) inline units having a proximity circuit resistor that is out of specification. This resistor within the affected UMC inline unit might prevent charging, might interrupt charging while in progress, and might affect the functionality of the UMC charge handle button when disconnecting the charge handle from the vehicle charge port.
The clamshell graft inside the HV battery was not fastened to Tesla?s internal specifications. This condition might result in a reduction of vehicle driving range.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).