Bulletin
On some Model 3 vehicles, the push rivets, nuts, and bolts that attach the underbody aero panels might have been improperly installed. Consequently, fasteners might be missing, and underbody panels might be damaged or missing.
🔔 Kostenloses Konto anlegen und Benachrichtigungen zu Tesla 3 (alle generationen) erhalten
Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
On some Model 3 vehicles, the push rivets, nuts, and bolts that attach the underbody aero panels might have been improperly installed. Consequently, fasteners might be missing, and underbody panels might be damaged or missing.
Certain Model 3 and Model Y vehicles may require replacement of the front body controller module due to a faulty component.
Certain Model 3 and Model Y vehicles may require replacement of the front body controller module due to a faulty component.
Certain Model 3 vehicles were equipped with a RH body controller module which might have a damaged component. Though the module is operational, should the component fail, the fresh air intake/recirculation setting of the vehicle?s climate control system is affected.
Some Model 3 vehicles were manufactured with triple camera windshield brackets that were not properly secured to the windshield. Autopilot is designed to deactivate if errors occur, but as a precaution, Autopilot features have been disabled on all suspect vehicles until this bulletin has been performed.
On some Model 3 vehicles, the body joint sealant on the outer rear quarter panels are missing or were not properly applied, causing water ingress to the trunk compartment.
Some Model 3 vehicles were built without butyl patches on the LH and RH front 1st row floor panels. Consequently, the sound of normal body flexing is heard and is not dampened.
Some Model 3 vehicles might have a slight bulge at either or both upper A-pillar trims. This is strictly a cosmetic issue, and does not affect the operation or safety of the A-pillar or windshield in any way.
On certain Model 3 vehicles, the hood latch might be out of alignment, causing a possible interference with the underhood storage unit.
An improved version of the Model 3 child safety switch in the underhood storage area now features a glow-in-the-dark button instead of a lighted button.
Some Model 3 vehicles might have a crack in the trunk lid paint, that might allow water entry.
Certain Model 3 vehicles have thermal harness covers that might allow splashed water to ingress into the front body controller module, potentially resulting in diminished connection.
Certain Model 3 vehicles have primary body seals that lack slip coat. Raising a window might require additional effort by the regulator motor, and might be falsely identified as a pinch condition.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).