Bulletin
On certain Model 3 vehicles, coolant might leak from the rear drive unit inverter 55 degree fluid coupling. This could result in a low coolant alert in the vehicle.
🔔 Kostenloses Konto anlegen und Benachrichtigungen zu Tesla 3 (alle generationen) erhalten
Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
On certain Model 3 vehicles, coolant might leak from the rear drive unit inverter 55 degree fluid coupling. This could result in a low coolant alert in the vehicle.
On some Model 3 vehicles, water might leak inside the motors of both front window motor/regulator assemblies. This might cause the motors to fail and potentially make the front windows inoperable.
On some Model 3 vehicles, water might leak inside the motors of both front window motor/regulator assemblies. This might cause the motors to fail and potentially making the front windows inoperable.
On some Model 3 vehicles, one of the bolts that helps to secure the rear drive unit inverter coolant manifold to the inverter housing might not have been installed. Consequently, coolant might leak from the manifold.
On some Model 3 vehicles, a pre-production LH upper trough plug is installed. The pre-production plug is completely functional, however, it does not cosmetically match the grommet on the RH upper trough.
Certain Model 3 vehicles were manufactured with LH front damper assemblies that do not meet internal specifications, which may result in elevated NVH (Noise, Vibration, and Harshness) from the front of the vehicle.
Certain Model 3 vehicles were manufactured with RH front damper assemblies that do not meet internal specifications, which may result in elevated NVH (Noise, Vibration, and Harshness) from the front of the vehicle.
Some Model 3 vehicles were manufactured without labels on the driver sun visor.
Certain Model 3 vehicles were manufactured with incorrect information on the statutory plate near the base of the driver side B-pillar.
Certain Model 3 vehicles were manufactured with incorrect regulatory labeling near the base of the driver side B-pillar.
Some early Model 3 vehicles were built with a RH rear reflex lens that was susceptible to cosmetic issues such as visible weld spots or foggy blemishes.
On certain Model 3 vehicles, a screw that secures the 12V DCDC positive terminal within the power conversion system (PCS) might have become loose. A loose terminal might present alerts on the touchscreen, or cause the PCS to shut down.
Certain Model 3 vehicles might have increased resistance at ground terminals, and might not provide sufficient signal reference ground at specific connectors.
For certain Model 3 vehicles, the power conversion system needs replacement.
On some Model 3 vehicles, the 2nd row floor footwell might make a muffled thud or pop noise when a passenger steps on the affected areas.
Certain 2nd generation Universal Mobile Connectors (UMCs) supplied to Tesla vehicles were not screened and might not indicate their status or charge the vehicle.
On some Model 3 vehicles, customers might state that the vehicle ride is too harsh. The ride tuning of early spring and damper assemblies is subjectively more firm than the ride tuning of updated assemblies.
On some Model 3 vehicles, the solid-wire rear drive unit (RDU) ground strap might transfer motor vibration into the cabin. This might result in customer perception of high motor noise levels.
On certain Model 3 vehicles, the 5-way valve actuator internals might wear prematurely, causing the actuator to become unreliable over time.
Certain Model 3 vehicles might have increased resistance at ground terminals, and might not provide sufficient signal reference ground at specific connectors.
An improved version of the Model 3 rear drive unit is now available that meets Tesla's high standards for performance and durability.
Some Model 3 vehicles might have increased resistance at certain ground terminals.
On some Model 3 vehicles, the charge port does not engage with a Supercharger charge cable, preventing the vehicle from being fast charged. Additionally, when a vehicle is being charged using a Wall Connector, the charge port engages with the charge cable, but the vehicle might charge at a reduced amperage rate.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).