Free to read · free account to contributeSuccessor to Anticars (2000)

Audi RS7

2013– · 1 generations · 2 documented defects · 2 markets
Generations
All generationsRS72013–245729

Service bulletins (TSBs) are repair instructions manufacturers send to their dealers about known problems. They are not safety recalls, but they often confirm a defect.

Model year
MarketAllNA
BulletinModerateEngineNA

Bulletin

This bulletin provides informaiton when there is a leak on the oil hole between the planetary and the transfer box.

NHTSA · manufacturer bulletin11034705Model years 2016View details →
BulletinModerateEngineNA

Bulletin

This TSB provides information when thee is an oil leak from, or near the oil filter housing.

NHTSA · manufacturer bulletin11021471Model years 2021View details →
BulletinModerateEngineNA

Bulletin

A small amount of dry or crusted coolant is seen on the coolant pump housing (Figure 1, Figure 2, and Figure 3). The coolant level warning is not on. A minor coolant leak is possible during the break-in phase of the coolant seal on the coolant pump. The dry coolant marks are normal.

NHTSA · manufacturer bulletin10216674Model years 2014View details →
BulletinModerateEngineNA

Bulletin

This bulletin contains repair instructions for when there is an oil leak from the rear of the vehicle and the sealing caps are missing from the pressure limiting valves.

NHTSA · manufacturer bulletin10210738Model years 2021View details →
BulletinModerateEngineNA

Bulletin

This bulletin describes the repair procedure to address an internal defect in the EVAP leak detection pump causing false leak detection.

NHTSA · manufacturer bulletin10210233Model years 2021View details →
BulletinModerateEngineNA

Bulletin

This bulletin describes the repair procedure to address an internal defect in the EVAP leak detection pump causing false leak detection.

NHTSA · manufacturer bulletin10206879Model years 2021View details →
BulletinModerateEngineNA

Bulletin

There is an internal defect in the EVAP leak detection pump causing false leak detection.

NHTSA · manufacturer bulletin10205901Model years 2021View details →
BulletinModerateEngineNA

Bulletin

This bulletin contains repair instructions for when there is an oil leak from the rear of the vehicle and the sealing caps are missing from the pressure limiting valves.

NHTSA · manufacturer bulletin10200702Model years 2020–2021View details →
BulletinModerateEngineNA

Bulletin

This bulletin contains instructions for using the UV additive to find engine oil leaks.

NHTSA · manufacturer bulletin10186945Model years 2020View details →
BulletinModerateEngineNA

Bulletin

A small amount of dry or crusted coolant is seen on the coolant pump housing. The coolant level warning is not on. A minor coolant leak is possible during the break-in phase of the coolant seal on the coolant pump. The dry coolant marks are normal.

NHTSA · manufacturer bulletin10124868Model years 2014View details →
BulletinModerateEngineNA

Bulletin

Supersedes Technical Service Bulletin Group 10 number 10-02 dated September 14, 2010. Prior to engine replacement, any debris lodged in transferred assemblies must be removed. If the vehicle's engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds, exhaust down-pipes, turbocharger, supercharger, and/or intercooler. If these pieces are not removed prior to the installation and operation of the replacement engine, the pieces may be drawn into the combustion chamber, which can cause a knocking noise and subsequent serious engine damage.

NHTSA · manufacturer bulletin10121324Model years 2014View details →
BulletinMinorEngineNA

Bulletin

This bulleti provides information when the fuel pressure is outside of tolerance, MIL is on, DTC P310B00.

NHTSA · manufacturer bulletin11026291Model years 2014View details →
BulletinMinorEngineNA

Bulletin

Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay.

NHTSA · manufacturer bulletin10228289Model years 2014View details →
BulletinMinorEngineNA

Bulletin

Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay.

NHTSA · manufacturer bulletin10224968Model years 2014View details →
BulletinMinorEngineNA

Bulletin

This bulletin advises to replace the EVAP LD Pump if DTC P044200 or DTC P045600 are present under specific circumstances.

NHTSA · manufacturer bulletin10220368Model years 2021View details →
BulletinMinorEngineNA

Bulletin

Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay.

NHTSA · manufacturer bulletin10221941Model years 2014View details →
BulletinMinorEngineNA

Bulletin

A check with the engine oil service dipstick T40178 is necessary, but the adjustment values for the dipstick are not available in the Elsa repair manual. Because of a system change, the adjustment values for the service dipstick T40178 were removed from the repair manual.

NHTSA · manufacturer bulletin10216652Model years 2014View details →
BulletinMinorEngineNA

Bulletin

Engine oils that meet Audi Oil Quality Standards.

NHTSA · manufacturer bulletin10216682Model years 2014View details →
BulletinMinorEngineNA

Bulletin

The crankcase breather is only connected to the bank 2 turbocharger inlet. Blow-by gases from the crankcase breather discolor the pipe (Figure 1). This is a normal condition.

NHTSA · manufacturer bulletin10216704Model years 2013View details →
BulletinMinorEngineNA

Bulletin

A highly sporadic startup timing issue can cause a message "CNG inspection Due! CNG Mode not available. Please contact workshop". This is a normal condition which can be resolved by recycling the ignition and repairs are not needed.

NHTSA · manufacturer bulletin10214760Model years 2022View details →
BulletinMinorEngineNA

Bulletin

This bulletin advises how to identify and repair instances where a vehicle may stops due to a lack of fuel while the fuel gauge shows 1/4 tank or more of fuel.

NHTSA · manufacturer bulletin10214456Model years 2021View details →
BulletinMinorEngineNA

Bulletin

Engine Intake & Exhaust Valve Springs

NHTSA · manufacturer bulletin10211918Model years 2022View details →
BulletinMinorEngineNA

Bulletin

Engine Intake & Exhaust Valve Springs

NHTSA · manufacturer bulletin10211917Model years 2022View details →
BulletinMinorEngineNA

Bulletin

A highly sporadic startup timing issue can cause a message "CNG inspection Due! CNG Mode not available. Please contact workshop". This is a normal condition which can be resolved by recycling the ignition and repairs are not needed.

NHTSA · manufacturer bulletin10212939Model years 2022View details →
BulletinMinorEngineNA

Bulletin

This bulletin contains repair instructions from the exhaust system at idle speed DTCs P047600, P048C00, P04A000, or P301B00 are stored in the ECM.

NHTSA · manufacturer bulletin10209104Model years 2021View details →
Older →

Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).