In the engine fuel system, some pulsation dampers (fuel pressure pulsation attenuators) were manufactured with their diaphragms damaged during the production process. If they continue to be used in this condition, the fuel pressure pulsations that occur during vehicle operation may cause cracks to develop from the damage in the diaphragm, which could result in fuel leakage.
In the fuel pump impeller (resin impeller), improper molding conditions can result in low resin density, causing the impeller to swell and deform when exposed to fuel. As a result, the impeller may come into contact with the pump case, causing the fuel pump to malfunction and, in the worst case, potentially leading to engine stall while driving.
In the fuel pump impeller (resin impeller), improper molding conditions can lead to low resin density, causing the impeller to swell and deform when exposed to fuel. As a result, the impeller may come into contact with the pump case, causing the fuel pump to malfunction and, in the worst case, potentially leading to engine stalling while driving.
On turbocharged vehicles, the crankshaft position sensor in the engine has insufficient durability in its internal coil. If the vehicle is repeatedly driven at high speed immediately after the engine starts, excessive vibration may cause the coil to break. As a result, the engine may stop while driving, or it may become impossible to restart the engine.
During the manufacturing process of the engine crankshaft position sensor, improper coil winding work may cause the coil to break during use. As a result, the engine may stall while driving, or the engine may become unable to start.
In some engines, the holes for fixing the transmission to the cylinder block were positioned improperly, so the engine and transmission were assembled with their axes misaligned. If the vehicle continues to be used in this condition, the clutch disc of a manual transmission or the drive plate of an automatic transmission may be damaged, and in the worst case the vehicle may become unable to drive.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).