Free to read · free account to contributeSuccessor to Anticars (2000)

Ford Bronco

1979– · 5 generations · 53 documented defects · 5 markets
Generations
Model year
MarketAllEUNAKR
Bronco VI · 2021–
Bronco VI · 2021–
RecallCriticalEngineNA

Engine and engine cooling:Engine:Hard parts internal/mechanical

Ford Motor Company (Ford) is recalling certain 2026 Explorer, Bronco, Bronco Sport, Mustang, and Ranger vehicles. The engine piston domes may have been manufactured incorrectly, which can result in piston dome failure and lead to a loss of drive power.

NHTSA · United StatesAug 25, 202626V548000Model years 2026View details →
Bronco VI · 2021–
RecallCriticalEngineNA

Engine

Ford Motor Company (Ford) is recalling certain 2021-2026 Bronco and Bronco Raptor vehicles. The engine compartment wiring harness may become damaged and short circuit.

NHTSA · United StatesJul 20, 202626V468000Model years 2021–2026View details →
Bronco VI · 2021–
Bronco VI · 2021–
Bronco VI · 2021–
Bronco VI · 2021–
RecallCriticalEngineNA

Fuel system, gasoline:Delivery:Fuel pump

Ford Motor Company (Ford) is recalling certain 2024 Bronco and Ranger vehicles. The bolts securing the high pressure fuel pump may not be tightened properly, which can result in a fuel leak.

NHTSA · United StatesSep 11, 202525V597000Model years 2024View details →
Bronco VI · 2021–
Bronco VI · 2021–
RecallCriticalEngineNA

Engine and engine cooling:Engine:Hard parts internal/mechanical

Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco, F-150, Edge, Explorer, Lincoln Nautilus, and Lincoln Aviator vehicles equipped with either a 2.7L or 3.0L Nano EcoBoost engine. The engine intake valves may break while driving, which can result in engine failure and a loss of drive power.

NHTSA · United StatesAug 23, 202424V635000Model years 2021–2022View details →
Bronco IV (1987) · 1986–1991
RecallCriticalEngineNA

Fuel System

Note: This recall supersedes recall 88164. Vehicles located in the yukon, nothwest territories, alberta, eastern british columbia, n.W. Ontario, manitoba and saskatchewan. A short, u-shaped nylon fuel tube (jumper tube) located on the left-hand frame rail connecting the fuel pump to the fuel filter could develop pin holes in the tubing wall. If this condition should occur, it would allow fuel to leak and a fire could result. Correction: A steel braided teflon fuel supply line and related components will be installed which will ground the fuel line and eliminate the potential for an electrostatic charge. The u-shaped nylon jumper tube will be eliminated by this replacement fuel system.

Transport CanadaJan 2, 19901990003Model years 1986–1989View details →
Bronco IV (1987) · 1986–1991
RecallCriticalEngineNA

Fuel System

A short, u-shaped nylon fuel tube (jumper tube) located on the left-hand frame rail connecting the fuel pump to the fuel filter could develop pin holes in the tubing wall. If this condition should occur, it would allow fuel to leak and a fire could result. Correction: Fuel tube will be replaced with one having a krayton sleeve.

Transport CanadaDec 2, 19881988164Model years 1986–1989View details →
Bronco III · 1979–1986Bronco IV (1987) · 1986–1991
RecallCriticalEngineNA

Fuel System

On vehicles with efi or cfi, the spring-lock fuel line coupling used to connect the fuel supply and return lines to the efi fuel rails or to the cfi throttle bodies as well as other fuel line connections near the dash panels on some vehicles, could disengage during vehicle use. Should this occur, loss of fuel will result, providing the potential for a vehicle fire. Correction: Coupling retainer clips will be installed on affected vehicles. Note: Escort vehicles are equipped with efi and cfi. Lynx vehicles are equipped with cfi only. Efi - electronic fuel injection cfi - central fuel injection

Transport CanadaSep 9, 19871987098Model years 1985–1987View details →
Bronco IV (1987) · 1986–1991
Bronco IV (1987) · 1986–1991
RecallCriticalEngineNA

Recall

Vehicles equipped with 2.9 litre e.F.I.,v6 engines, there is a possibility that a nylon fuel line on the fuel return side of the fuel pressure regulator assembly may crack and leak fuel. In the presence of an ignition source, the potential for fire would exist.

Transport CanadaOct 25, 19851985116Model years 1986View details →
Bronco IV (1987) · 1986–1991
Bronco III · 1979–1986
Bronco VI · 2021–
RecallModerateEngineNA

Fuel system, gasoline:Delivery:Fuel pump

Ford Motor Company (Ford) is recalling certain 2021-2023 Bronco, Explorer, Lincoln Aviator, F-250 SD, F-350 SD, F-450 SD, F-550 SD, 2021-2022 Lincoln Navigator, Mustang, F-150, and 2022 Expedition vehicles. The low-pressure fuel pump may fail, which can result in an engine stall while driving.

NHTSA · United StatesJul 7, 202525V455000Model years 2021–2023View details →
Bronco IV (1987) · 1986–1991
RecallModerateEngineNA

Emissions

These vehicles do not comply with c.M.V.S.S. 1103 - exhaust emissions. Nitrous oxide levels exceed the standard. Correction: Owners will be provided with revised starting instructions for the owner guide. Certain vehicles will have the engine emissions control systems modified and exhaust system catalysts replaced.

Transport CanadaFeb 2, 19941994016Model years 1988View details →
Bronco IV (1987) · 1986–1991
RecallModerateEngineNA

Engine

This recall supersedes recall 90-27 for vehicles in the maritimes. The throttle may stick in an open position due to linkage binding caused by corrosion. This would cause the engine to run at higher than idle speed when the throttle is released and could adversely affect driver control resulting in a possible crash. Correction: A stainless steel sleeve, which will be placed over the hub on the throttle body assembly, and a secondary throttle lever to fit the sleeve, along with other mounting parts, will be installed on affected vehicles.

Transport CanadaFeb 11, 19911991021Model years 1986–1988View details →
Bronco IV (1987) · 1986–1991
RecallModerateEngineNA

Engine

Ranger/bronco ii - 2.9 litre engines taurus/sable - 3.0 litre engines note: Vehicles located in newfoundland, nova scotia, new brunswick and prince edward island. The throttle may stick in an open position due to linkage binding caused by corrosion. This would cause the engine to run at higher than idle speed when the throttle is released and could adversely affect driver control resulting in a possible crash. Correction: On vehicles with 2.9 litre engines, dealers will clean, modify and lubricate the hub pin and lever bushings with a marine-type anti-seize grease. Additionally, on vehicles with 3.0 litre engines, the hub pin lever assembly will be replaced. Note: This recall has been superseded by recall no. 91021.

Transport CanadaFeb 9, 19901990027Model years 1986–1988View details →
Bronco III · 1979–1986
Bronco III · 1979–1986
RecallModerateEngineNA

Recall

Carburetor throttle shafts may be susceptible to dirt contamination and wear of the bearing coatings. This could cause the secondary throttle plates to remain partially open after the driver has released the accelerator pedal. This this were to occur, engine speed would not return to idle potentially affecting vehicle control and stopping distances.

Transport CanadaSep 28, 19841984117Model years 1984View details →
Bronco III · 1979–1986
Bronco III · 1979–1986
RecallModerateEngineNA

Recall

Vehicles equipped with 5.0 litre engines. Vehicles may not comply with cmvss 1103 - exhaust emissions.

Transport CanadaMay 7, 19811981058Model years 1980View details →

Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).