Due to the poor design of the flange that secures the exhaust tube to the fuel tank, a stress-related crack could develop on the outer surface of the flange and expand over time, increasing the risk of fire.
EU Safety Gate · RappelConso · FranceApr 23, 2024a12/01862/22Model years 2011–2018Auto-translated · original: FrenchView details →
A crack in the fuel pulsation damper may lead to a fuel leak. Fuel leakage close to a source of ignition may increase the risk of the vehicle catching fire.
EU Safety GateOct 26, 2018A12/1622/18Model years 2005–2012View details →
On certain vehicles equipped with a 3.5L V6 engine, the fuel pulsation dampers located in the fuel delivery pipe could develop a leak over time. A fuel leak in the presence of an ignition source could increase the risk of fire causing injury and/or damage to property. Correction: Dealers will replace the fuel delivery pipe with an updated part.
Transport CanadaJun 26, 20182018346Model years 2007–2011View details →
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2007-2011 Lexus GS350 and GS450h, 2006-2013 Lexus IS350 and 2010-2014 Lexus IS350C vehicles, equipped with 3.5L V6 2GR-FSE gasoline engines. The diaphragms in the fuel pulsation dampers may harden over time and develop cracks, possibly causing a fuel leak.
NHTSA · United StatesJun 26, 201818V432000Model years 2007–2011View details →
On certain vehicles, the fuel delivery pipes in the engine compartment may have been produced with particles from the anti-corrosion plating on the gasket seating surface where the fuel pressure sensor is installed. This could affect the sealing properties of the gasket seated between the pressure sensor and the pipe, potentially resulting in a fuel leak. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or property damage. Correction: Dealers will replace the gasket and repair the gasket seating surface.
Transport CanadaOct 16, 20142014458Model years 2006–2010View details →
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2007-2010 Lexus LS vehicles manufactured May 9, 2006, to July 20, 2010, 2006-2011 Lexus GS vehicles manufactured January 6, 2005, to September 10, 2010, and 2006-2011 Lexus IS vehicles manufactured August 30, 2005, to September 10, 2010. Due to anti-corrosion plating remnants, fuel may leak from where the fuel pressure sensor is attached to the fuel delivery pipe.
NHTSA · United StatesOct 15, 201414V647000Model years 2006–2011View details →
Het materiaal van de ommanteling van de brandstofpompbedrading in de brandstoftank is niet voldoende flexibel. Hierdoor beweegt de elektrische aansluiting op de brandstofpomp teveel.
rdwDec 18, 2013MGP100246Model years 2005Shown in the original Dutch · translation pendingView details →
Toyota is recalling certain model year 2006-2009 lexus is and model year 2006-2007 lexus gs vehicles. Due to insufficient tightening of the fuel pressure sensor connected to an engine fuel delivery pipe with nickel phosphorus plating, there is a possibility that, over time, the pressure sensor could loosen. If loosening occurs, fuel could leak past a gasket used in the connection between the sensor and the pipe and through the threaded portion of the sensor.
NHTSA · United StatesJan 26, 201111V029000Model years 2006–2007View details →
On certain vehicles, the material composition of the engine valve springs may include micro-foreign objects, which may compromise the strength of the valve spring, causing the spring to degrade and break. If a valve springs breaks, abnormal noise and rough engine performance will be noticed and, in the worst case, the engine could fail and stop suddenly while the vehicle is in motion. A sudden engine failure would result in lost propulsion which, in conjunction with traffic, road conditions, and driver's reactions, could increase the risk of a crash causing property damage, personal injury or death. Correction: Dealers will install new valve springs.
Transport CanadaJul 5, 20102010221Model years 2007–2008View details →
On certain vehicles, the use of selected ethanol fuels may cause the aluminium fuel rails to corrode. This could result in plugged fuel injector(s), causing a rough engine idle and/or the illumination of the engine warning lamp. Corrosion may also cause a pinhole to develop on the fuel rail, which could result in fuel leakage. Fuel leakage, in the presence of an ignition source, could result in a vehicle fire. Correction: Dealers will replace the fuel rails.
Transport CanadaJan 19, 20092009015Model years 2006–2007View details →
Toyota is recalling 214,570 my 2006-2008 lexus is, my 2006-2007 gs and my 2007-2008 ls passenger vehicles equipped with aluminum fuel delivery pipes (fuel rails). Ethanol fuels with a low moisture content will corrode the internal surface of the fuel rails. As this condition progresses, the engine malfunction indicator light may illuminate.
NHTSA · United StatesJan 16, 200909V020000Model years 2006–2007View details →
On certain GS 300, GS 300 AWD, IS 250, IS 250 AWD and IS 350 vehicles, incorrect fabrication process may cause the fuel lines to crack, possibly resulting in a leak. Fuel leakage, in the presence of an ignition source, could result in a vehicle fire causing injury or death. Correction: Dealers will replace the fuel lines.
Transport CanadaNov 28, 20072007377Model years 2006View details →
On certain vehicles, high stress areas may have been created in two specific fuel pipes located in the engine compartment. Combined with other factors such as the presence of corrosive agents in fuel, a crack may form over time leading to fuel leakage from the fuel line(s).
NHTSA · United StatesNov 28, 200707V545000Model years 2006View details →
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2015-2022 Lexus RC, 2016-2020 GS, and 2022 IS vehicles. The low-pressure fuel pump inside the fuel tank may fail.
NHTSA · United StatesApr 8, 202626V222000Model years 2016–2020View details →
In the low-pressure fuel pump's impeller (resin impeller), improper molding conditions can lower the resin density, causing it to swell and deform when exposed to fuel. As a result, the impeller may contact the pump case, causing the fuel pump to malfunction and, in the worst case, potentially leading to an engine stall while driving.
Due to a manufacturing defect, surface cracking may occur on the impeller of the low-pressure fuel pump. Consequently, the impeller may deform, causing the fuel pump to become inoperative and the engine to stall, increasing the risk of an accident.
EU Safety GateNov 16, 2022A12/00414/20Model years 2019View details →
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).