Free to read · free account to contributeSuccessor to Anticars (2000)

LexusLexus IS

1998– · 4 generations · 35 documented defects · 4 markets
Generations

Service bulletins (TSBs) are repair instructions manufacturers send to their dealers about known problems. They are not safety recalls, but they often confirm a defect.

SeverityAllMinor
Model year
IS III · 2013–
BulletinMinorEngineNA

Bulletin

DL: On December 20, 2022, a settlement of claims for certain low pressure fuel pumps was approved by the federal court. The settlement includes Lexus?s agreement to provide a Customer Support Program for certain 2013-2020 model year (MY) vehicles originally equipped with low pressure fuel pumps repaired under Safety Recall 20LA01 or Special Service Campaign 21LC01. The purpose of this Customer Support Program letter is to help clarify how to administer this coverage in accordance with the settlement.

NHTSA · manufacturer bulletin10235219Model years 2017View details →
IS III · 2013–
BulletinMinorEngineNA

Bulletin

TSB: Some 2013 ? 2020 model year Lexus vehicles may exhibit a hard start and/or MIL ON condition with one or more of the following Diagnostic Trouble Codes (DTCs): ?DTC P0171 and/or P0174 (System Too Lean Bank 1/Bank 2) ?DTC P0087 Fuel Rail / System Pressure ? Too Low Techstream data list analysis may reveal positive fuel trims including a no pressure condition verified by a manual fuel pressure gauge. Follow the Repair Procedure in this bulletin to address these conditions.

NHTSA · manufacturer bulletin10235215Model years 2017View details →
IS I · 1998–2005
BulletinMinorEngineNA

Bulletin

This is to advise of various price adjustments affecting Genuine Lexus Motor Oil and Long-Life Coolant, effective March 1, 2023. These products are ordered through the Lexus Complete Maintenance Care (LCMC) website.

NHTSA · manufacturer bulletin10234301View details →
IS III · 2013–
BulletinMinorEngineNA

Bulletin

DP: The subject vehicles may have been equipped with an engine containing an incorrectly manufactured Crankcase Case Vent. If the engine is equipped with an incorrectly manufactured Crankcase Case Vent, the vehicle may release crankcase emissions.

NHTSA · manufacturer bulletin10224163Model years 2022View details →
IS II · 2005–2013
BulletinMinorEngineNA

Bulletin

Adhesive & Sealant Cross Reference Information/ Engine Hybrid System

NHTSA · manufacturer bulletin10205360Model years 2013View details →
IS II · 2005–2013
BulletinMinorEngineNA

Bulletin

Adhesive & Sealant Cross Reference Information/ Engine Hybrid System

NHTSA · manufacturer bulletin10205361Model years 2013View details →
IS II · 2005–2013
BulletinMinorEngineNA

Bulletin

Engine Misfire Duplication Procedure - MIL on DTC p030 and /or Intermittently Runs Rough

NHTSA · manufacturer bulletin10205364Model years 2010View details →
IS II · 2005–2013
BulletinMinorEngineNA

Bulletin

Engine Misfire Duplication Procedure - MIL on DTC p030 and /or Intermittently Runs Rough

NHTSA · manufacturer bulletin10205387Model years 2010View details →
IS II · 2005–2013
BulletinMinorEngineNA

Bulletin

TT: Some IS250 and GS300 vehicles may exhibit one or more of the following conditions: ? MIL ?ON? DTC P0300, P0301, P0302, P0303, P0304, P0305, and/or P0306. ? Intermittently runs rough after coming to a stop with the engine at operating temperature. ? Intermittently runs rough with engine misfires present after a cold soak startup. NOTE: The recommendations in this document apply to an intermittent misfire concern. If a vehicle exhibits a steady misfire, the root cause is not related to the referenced service bulletins and the repair manual should be referenced for diagnosis.

NHTSA · manufacturer bulletin10152274Model years 2010View details →
IS III · 2013–
BulletinMinorEngineNA

Bulletin

TT: TMS has discovered the current engine active test ?Control the Injection Mode? is not operating as desired when controlling the direct injectors manually on 2GR-FKS or 8AR-FTS engines. When direct injection is started and then stopped using the active test, current ECU logic does not turn off the direct injectors and can cause DTCs P017200, P017500 and P0160300. In order to avoid this condition, technicians should raise engine RPM when changing from Direct Injection active test to Port Injection active test. Use the recommended procedure below to avoid this concern while testing injection mode of 2GR-FKS or 8AR-FTS equipped vehicles. NOTE: If the active test is used multiple times without using this procedure to raise engine RPM, it may be necessary to reset learning values for fuel trim and Air to Fuel ratio before returning vehicle to customer.

NHTSA · manufacturer bulletin10152276Model years 2016View details →
IS II · 2005–2013
BulletinMinorEngineNA

Bulletin

Some IS250 and GS300 vehicles may exhibit one or more of the following conditions: MIL "ON" DTC P0300, P0301, P0302, P0303, P0304, P0305, and or P0306. Intermittently runs rough after coming to a stop with the engine at operating temperature. intermittently runs rough with engine misfires present after a cold soak startup.

NHTSA · manufacturer bulletin10132274Model years 2010View details →
IS II · 2005–2013
BulletinMinorEngineNA

Bulletin

Some IS250 and GS300 vehicles may exhibit one or more of the following conditions: MIL ?ON? DTC P0300, P0301, P0302, P0303, P0304, P0305, and/or P0306 Intermittently runs rough after coming to a stop with the engine at operating temperature Intermittently runs rough with engine misfires present after a cold soak startup

NHTSA · manufacturer bulletin10132188Model years 2010View details →
IS II · 2005–2013
BulletinMinorEngineNA

Bulletin

Tech Tip: Some IS250 and GS300 vehicles may exhibit one or more of the following conditions: MIL "ON" DTC P0300, P0301, P0302, P0303, P0304, P0305, and/or P0306. Intermittently runs rough after coming to a stop with the engine at operating temperature. Intermittently runs rough with engine misfires present after a cold soak startup. NOTE: The recommendations in this document apply to an intermittent misfire concern. If a vehicle exhibits a steady misfire, the root cause is not related to the referenced service bulletins and the repair manual should be referenced for diagnosis.

NHTSA · manufacturer bulletin10109510Model years 2010View details →
IS III · 2013–
BulletinMinorEngineNA

Bulletin

"tt: Tms has discovered the current engine active test control the injection mode is not operating as desired when controlling the direct injectors manually on 2gr-fks or 8ar-fts engines. When direct injection is started and then stopped using the active test, current ecu logic does not turn off the direct injectors and can cause dtcs p017200, p017500 and p0160300. In order to avoid this condition, technicians should raise engine rpm when changing from direct injection active test to port injection active test. Use the recommended procedure below to avoid this concern while testing injection mode of 2gr-fks or 8ar-fts equipped vehicles. Note: If the active test is used multiple times without using this procedure to raise engine rpm, it may be necessary to reset learning values for fuel trim and air to fuel ratio before returning vehicle to customer."

NHTSA · manufacturer bulletin10093695Model years 2016View details →
IS II · 2005–2013
BulletinMinorEngineNA

Bulletin

"tt: Some is250 and gs300 vehicles may exhibit one or more of the following conditions: Mil on dtc p0300, p0301, p0302, p0303, p0304, p0305, and/or p0306. Intermittently runs rough after coming to a stop with the engine at operating temperature. Intermittently runs rough with engine misfires present after a cold soak startup. Note: The recommendations in this document apply to an intermittent misfire concern. If a vehicle exhibits a steady misfire, the root cause is not related to the referenced service bulletins and the repair manual should be referenced for diagnosis."

NHTSA · manufacturer bulletin10093692Model years 2010View details →
IS II · 2005–2013
BulletinMinorEngineNA

Bulletin

Lexus is250-gs300: Vehicles may experience engine running rough when coming to a stop along with engine misfires after cold startup. *lj

NHTSA · manufacturer bulletin10057005Model years 2010View details →
IS II · 2005–2013
BulletinMinorEngineNA

Bulletin

Lexus: Some vehicles may exhibit a mil on condition with one or more of the following diagnostic trouble codes (dtcs): P0300, p0301, p0302, p0303, p0304, p0305, and p0306-random misfire detected; cylinder 1-6 misfire detected. This condition is not not dependent on engine temperature or initial engine run time. *pe

NHTSA · manufacturer bulletin10033784Model years 2006View details →
IS II · 2005–2013
BulletinMinorEngineNA

Bulletin

Ilsac gf-4 engine oil standard. '06 lexus. *tt excluding hybrid vehicles. *tt recommendation. *tt

NHTSA · manufacturer bulletin10019327Model years 2006View details →
IS I · 1998–2005
BulletinMinorEngineNA

Bulletin

Repair manual correction for the engine. 00245-rm105-4u1. *tt

NHTSA · manufacturer bulletin10015652Model years 2004View details →
IS I · 1998–2005
BulletinMinorEngineNA

Bulletin

Improvement to ignition cylinder performance. *tt

NHTSA · manufacturer bulletin10002015Model years 2001View details →
IS I · 1998–2005
BulletinMinorEngineNA

Bulletin

Throttle response and downshift quality improvements. *tt

NHTSA · manufacturer bulletin10000417Model years 2001View details →

Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).