Motorrijtuigen en aanhangwagens - verbinding tussen motorvoertuig en aanhangwagen
De verlichting van de gekoppelde aanhangwagen functioneert niet bij ingeschakelde dagrijverlichting (DRL) door een softwarefout in de trekhaakmodule.
🔔 Create a free account to get email alerts about Mazda Mazda6 (all generations)
De verlichting van de gekoppelde aanhangwagen functioneert niet bij ingeschakelde dagrijverlichting (DRL) door een softwarefout in de trekhaakmodule.
Interne onderdelen van de lagedrukbrandstofpomp kunnen vervormen. Als gevolg kan de lagedrukbrandstofpomp defect raken.
The fuel pump seals are not properly installed and/or not protected against heat generated by the exhaust. As a result, they may start to leak or crack.
2燃料タンクにおいて、タンク上面にある樹脂製ポンプリングの締め付けトルクの設定が不適切なため、ポンプリングの強度が低下することがある。そのため、そのまま使用を続けるとポンプリングに亀裂が入り燃料が漏れ、最悪の場合、火災に至るおそれがある。
1燃料タンクにおいて、タンク上面にある樹脂製ポンプリング部の遮熱性が不足しているため、エンジンや排気管からの熱影響を受けてポンプリングが劣化することがある。そのため、そのまま使用を続けると劣化が進行して、ポンプリングに亀裂が入り燃料が漏れ、最悪の場合、火災に至るおそれがある。
Door een onjuiste aansturing van het hydraulische kleppentrein kan de inlaatklep, tijdens bepaalde bedrijfsomstandigheden, in contact komen met andere inwendige bewegende motoronderdelen.
Het regelcircuit van de brandstofinjectie kan met een te hoge elektrische stroom worden belast. Dit kan leiden tot kortsluiting in het regelcircuit en uitvallen van de brandstofinjectie.
2ディーゼルエンジンにおいて、整備作業時の燃料リターンホースの取扱いが不明確なため、当該ホースに係わる作業時に交換されなかった場合、ホース取付部のシール性低下やホース内部に亀裂が入ることがある。そのため、そのまま使用を続けると、ホース取付部や亀裂部から燃料が漏れるおそれがある。
Mazda North America Operations (Mazda) is recalling certain model year 2014 Mazda6 vehicles manufactured October 25, 2012, through May 9, 2013. In the affected vehicles, it is possible to fill the fuel tank beyond its rated capacity.
Mazda North America Operations (Mazda) is recalling certain model year 2010-2012 Mazda6 vehicles manufactured September 14, 2009, through May 2, 2011, and equipped with 2.5L engine. In the affected vehicles, spiders may weave a web in the evaporative canister vent hose, blocking it and causing the fuel tank to have an excessive amount of negative pressure.
Er kunnen barstjes ontstaan in één van de elektronische componenten van de gelijkstroomomvormer (DC-DC omvormer).
原動機において、部品組付け設備の設定が不適切なため、ピストンとコネクティングロッドを留めるピストンピンの抜け止めのためのピストンクリップが変形しているものがある。そのため、そのまま使用を続けると当該クリップが外れ、ピストンピンが抜けて異音がし、ピストン、コネクティングロッドが破損し、最悪の場合、エンジンが破損し、オイルが漏れて、火災に至るおそれがある。
Mazda is recalling certain model year 2009-2010 mazda6 vehicles manufactured from april 8, 2008, through february 8, 2010. A certain type of spider may weave a web in the evaporative canister vent line and this may cause a restriction in the line. If this occurs, the fuel tank pressure may become excessively negative when the emission control system works to purge the vapors from the canister.
Mazda is recalling 7,200 my 2007-2008 mazda6 vehicles with california emission specifications. The metal fuel tanks on the affected vehicles may have had the pvc protective coating on the outside of the fuel tank damaged during the assembly process which may result in reduced corrosion resistance.
1樹脂製燃料タンクに取り付けたインシュレータと排気管との隙間が不足しているため、 燃料タンクが膨張した際に、当該インシュレータと排気管が干渉するものがある。そのた め、そのまま使用を続けると、当該インシュレータが高温となり、最悪の場合、燃料タン クが融けて穴があき、燃料が漏れて火災に至るおそれがある。
On certain passenger vehicles, the fuel sender unit (fsu) may have been improperly installed in the fuel tank, producing an inadequate seal, and fuel may leak.
In gasoline-engine vehicles, the impeller (resin impeller) of the low-pressure fuel pump may be deformed by swelling from the fuel because the resin density is low due to improper molding conditions. As a result, the impeller may contact the pump case, causing the low-pressure fuel pump to malfunction and, in the worst case, possibly leading to engine stalling while driving.
A short circuit may occur in the injector control circuit, which could stall the engine and reduce brake assistance. These conditions could increase the risk of injury in the event of an accident.
The impeller in the low-pressure fuel pump may become deformed causing fuel pump failure.
Fuel may leak from fuel pump rings.
In gasoline-engine vehicles, the impeller (resin impeller) of the low-pressure fuel pump may have a lower resin density due to improper molding conditions, and may swell and deform when exposed to fuel. As a result, the impeller may contact the pump case, causing the low-pressure fuel pump to malfunction and, in the worst case, potentially leading to engine stalling while driving.
Mazda North American Operations (Mazda) is recalling certain 2018 Mazda3, Mazda6, 2019 CX-3, 2018-2019 MX-5, CX-5, CX-9, and 2019-2020 Mazda2 vehicles. The impeller inside the low-pressure fuel pump may crack and deform, potentially causing the fuel pump to fail.
Soot may accumulate around the intake shutter valve on the inlet side of the engine.
De luchtinlaatklep kan in gesloten stand blokkeren als gevolg van roetaccumulatie. Hierdoor kan de luchtinlaatklep niet goed functioneren.
エンジンの吸気側バルブスプリングにおいて、スプリング荷重の設定が不適切なため、吸気バルブの閉じ力が弱く、吸気バルブとバルブシート間に挟まる煤を押し潰すことができず、圧縮不良となることがある。そのため、エンジン回転が不安定になり、最悪の場合、エンジンが停止するおそれがある。
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).