Free to read · free account to contributeSuccessor to Anticars (2000)

Mazda RX-8

2003–2012 · 1 generations · 18 documented defects · 4 markets
Generations
All generationsRX-82003–2012185534
Model year
RecallCriticalInteriorJP

エアバッグ

助手席側エアバッグのインフレータ(ガス発生装置)において、ガス発生剤が湿気のある状態で長期間の温度変化にさらされると劣化することがある。このため、エアバッグ展開時にインフレータ容器が破損するおそれがある。

MLIT · JapanOct 31, 20191145940Model years 2002–2005Shown in the original Japanese · translation pendingView details →
RecallCriticalInteriorNADo not drive until repaired

Air bags:Frontal:Passenger side:Inflator module

Mazda North American Operations (Mazda) is recalling certain 2003-2008 Mazda6, 2004-2005 MPV, 2004 RX-8, and 2006-2007 Mazdaspeed6 vehicles. These vehicles had their passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.

NHTSA · United StatesOct 31, 201919V781000Model years 2004View details →
RecallCriticalInteriorNADo not drive until repaired

Air bags:Frontal:Passenger side:Inflator module

Mazda North American Operations (Mazda) is recalling certain 2010-2011 Mazda RX-8 vehicles that were previously recalled under recall 18V-716 but have not yet been repaired. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

NHTSA · United StatesJun 24, 201919V488000Model years 2010–2011View details →
RecallCriticalInteriorEU

The ammonium nitrate propellant used in the air bag inflator may degrade over time due to heat cycles and…

The ammonium nitrate propellant used in the air bag inflator may degrade over time due to heat cycles and exposure to moisture. In the event of the passenger frontal airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.

EU Safety GateJan 4, 2019A12/0022/19Model years 2003–2010View details →
RecallCriticalInteriorNA

Airbag

Note: This recall is superseded by recall 2019496. Please see <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2019496">recall 2019496</a> for more information. On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Additional Note: This is an expansion of recall 2018-038.

Transport CanadaOct 25, 20182018584Model years 2010–2011View details →
RecallCriticalInteriorNADo not drive until repaired

Air bags:Frontal:Passenger side:Inflator module

Mazda North America Operations (Mazda) is recalling certain 2005-2006 Mazda MPV vehicles sold, or ever registered, in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. On July 9, 2019 this recall was expanded to include certain 2005-2009 RX-8 vehicles that were previously recalled under 17V-011 but have not yet been repaired. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

NHTSA · United StatesJun 15, 201818V404000Model years 2005–2009View details →
RecallCriticalInteriorNADo not drive until repaired

Air bags:Frontal:Passenger side:Inflator module

Mazda North America Operations (Mazda) is recalling certain 2003-2008 Mazda6, 2006-2007 Mazdaspeed6 and 2004 MPV vehicles nationwide. Mazda is also recalling 2005-2006 MPV vehicles in Alabama, Arizona, Arkansas, California, Delaware, the District of Columbia, Florida, Georgia, Hawaii, Illinois, Indiana, Kansas, Kentucky, Louisiana, Maryland, Mississippi, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, South Carolina, Tennessee, Texas, Virginia, West Virginia, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands. On July 9, 2019 this recall was expanded to include certain 2004-2011 RX-8 vehicles that were previously recalled under 16V-354 but have not yet been repaired. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these passenger air bag inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

NHTSA · United StatesJun 15, 201818V402000Model years 2004–2011View details →
RecallCriticalInteriorNADo not drive until repaired

Air bags:Frontal:Passenger side:Inflator module

Mazda North America Operations (Mazda) is recalling certain 2009-2010 Mazda RX-8 vehicles that were previously recalled under recall 18V-017 but have not yet been repaired. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

NHTSA · United StatesJun 15, 201818V403000Model years 2009–2010View details →
RecallCriticalInteriorNA

Airbag

Note: This recall is superseded by recall 2019496. Please see <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2019496">recall 2019496</a> for more information. On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Additional Note: This recall supersedes recalls 2016-259 (Mazda Recall 9416E) and 2017-011 (Mazda Recall 0617A) for RX-8 models only. RX-8 model vehicles completed under those two recalls do not need to be completed under recall 2018-038 (Mazda Recall 2018A).

Transport CanadaJan 19, 20182018038Model years 2004–2009View details →
RecallCriticalInteriorNADo not drive until repaired

Air bags:Frontal:Driver side:Inflator module

Mazda North American Operations (Mazda) is recalling certain model year 2003-2008 Mazda6, 2004-2008 RX-8, and 2006-2007 Mazdaspeed6 vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion and other factors, including manufacturing variability that, over time, could cause the inflator to rupture.

NHTSA · United StatesJul 26, 201717V474000Model years 2004–2008View details →
RecallCriticalInteriorNA

Airbag

Note: The recall for the 2005-2008 RX-8 models has been superseded by recall <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018038">2018038 (Mazda Recall 2018A)</a>, and the recall for the 2005-2006 MPV models has been superseded by recall <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018578">2018578 (Mazda Recall 2618F)</a>. On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag inflator. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. Additional note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.

Transport CanadaJan 10, 20172017011Model years 2005–2008View details →
RecallCriticalInteriorJP

エアバッグ

助手席側エアバッグのインフレータ(ガス発生装置)において、ガス発生剤が湿気のある状態で長期間の温度変化にさらされると劣化することがある。このため、エアバッグ展開時にインフレータ容器が破損して構成部品が飛散し、乗員が負傷するおそれがある。

MLIT · JapanJun 30, 20161138400Model years 2003–2012Shown in the original Japanese · translation pendingView details →
RecallCriticalInteriorNA

Airbag

Note: The recall for the 2004 RX-8 model has been superseded by <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018038">recall 2018-038 (Mazda Recall 2018A)</a>, and the recall for the 2004 MPV model has been superseded by recall <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018578">2018578 (Mazda Recall 2618F)</a>. On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the airbag inflator. Additional note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.

Transport CanadaMay 26, 20162016259Model years 2004View details →
RecallCriticalInteriorUK

Driver's front airbag may fail to deploy correctly

Continued exposure to high levels of absolute humidity may cause the driver�s front airbag inflator housing to rupture and deploy abnormally in the event of a crash necessitating deployment of the driver�s front airbag. Should the inflator rupture it could result in metal fragments striking the driver or other vehicle occupants.

DVSA · United KingdomApr 29, 2016R/2016/084Model years 2003–2008View details →
RecallCriticalInteriorJP

エアバッグ

特定の運転者席側エアバッグのインフレータ(膨張装置)において、エアバッグ展開時にインフレータ内圧で容器が破損して構成部品が飛散し、乗員が負傷するおそれがある。

MLIT · JapanJun 4, 20151135850Model years 2002–2008Shown in the original Japanese · translation pendingView details →
RecallCriticalInteriorNA

Airbag

On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the airbag module. Note: This recall is superseded by recall 2018-036. Please see recall 2018-036 for more information. <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018036">Click here for more information</a>.

Transport CanadaJun 4, 20152015247Model years 2004–2008View details →
RecallCriticalInteriorNA

Airbag

Mazda Canada is conducting a voluntary Safety Improvement Campaign concerning the driver's airbag inflator on certain vehicles equipped with Takata airbags. Mazda will replace the driver's inflator on affected vehicles. This action is not being conducted under the requirements of the Motor Vehicle Safety Act. Note: This Safety Improvement Campaign is superseded by recall 2015-247 (Mazda Recall 8215F). Please see <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2015247">recall 2015247</a> for more information.

Transport CanadaDec 17, 20142014570Model years 2004–2008View details →
RecallCriticalInteriorJP

エアバッグ

助手席用エアバッグのインフレータ(膨張装置)において、ガス発生剤の成型工程が不適切又は成型後の吸湿防止措置が不適切なため、密度が不足したガス発生剤が組み込まれたものがある。そのため、エアバッグ展開時にインフレータ内圧が異常上昇し、インフレータ容器が破損して飛び散り、出火したり乗員が負傷するおそれがある。

MLIT · JapanJun 23, 20141133760Model years 2002–2003Shown in the original Japanese · translation pendingView details →
RecallCriticalInteriorNA

Airbag

Note: For Mazda6 models, this recall is superseded by recall 2018578 (Mazda Recall 2618F). Please see recall <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018578">2018578</a> for more information. For RX-8 models, this recall is superseded by recall 2019496 (Mazda Recall 2618F). Please see <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2019496">recall 2019496</a> for more information. On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the passenger airbag inflator. Note: This recall is an expansion of recall 2013112.

Transport CanadaJun 23, 20142014245Model years 2004View details →
RecallCriticalInteriorJP

エアバッグ

助手席用エアバッグのインフレータ(膨張装置)において、ガス発生剤の成型工程が不適切又は成型後の吸湿防止措置が不適切なため、密度が不足したガス発生剤が組み込まれたものがある。そのため、エアバッグ展開時にインフレータ内圧が異常上昇し、インフレータ容器が破損して飛び散り、出火するおそれがある。

MLIT · JapanApr 11, 20131131420Model years 2002–2003Shown in the original Japanese · translation pendingView details →
RecallCriticalInteriorNA

Airbag

On certain vehicles, the front passenger-side airbag was improperly wired and may not provide adequate protection in the event of a crash. Correction: Dealer will install a short wiring harness kit.

Transport CanadaFeb 19, 20042004067Model years 2004View details →
RecallModerateInteriorEU

The user's text is truncated: "Lorsque le coussin gonflable est activé, un défaut dans le générateur de gaz du coussin gonflable…" Translation: When the airbag is deployed, a fault in the airbag's gas generator...

When the airbag is deployed, a fault in the gas generator of the driver's airbag can cause uncontrolled inflation and the release of metal fragments, which may injure the occupants.

EU Safety Gate · RappelConso · FranceDec 16, 2022a12/00508/22Model years 2002–2011Auto-translated · original: FrenchView details →
Older →

Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).