Free to read · free account to contributeSuccessor to Anticars (2000)

Nissan Pathfinder

1985– · 7 generations · 67 documented defects · 6 markets
Generations
Model year
Pathfinder III · 2004–2014
RecallCriticalEngineNA

Fuel System

On certain vehicles, the molded fuel tanks are slightly thinner than specification in the area under the fuel sender unit. This may allow the tank floor to deform causing the fuel sender float to interfere with other features inside the tank. This could cause the instrument panel fuel gauge to show a fuel level of approximately one quarter tank when the fuel tank is empty. An inaccurate fuel gauge can lead to engine stalling while driving, which may increase the risk of a crash causing property damage, personal injury or death. Correction: Letters will be sent to owners in two stages. The first letter will advise owners of fuel gauge inaccuracy and recommend maintaining a fuel level above the one half position. The second letter will follow, requesting owners bring their vehicles to a dealer for replacement of the fuel sender unit.

Transport CanadaMar 3, 20102010061Model years 2006–2008View details →
Pathfinder Infiniti QX4 · 1996–2002
RecallCriticalEngineNA

Fuel system, gasoline:Storage:Tank assembly:Filler pipe and cap

On certain vehicles originally sold in or currently registered in the states of connecticut, delaware, iowa, illinois, indiana, kentucky, massachusetts, maine, maryland, michigan, minnesota, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, tennessee, vermont, virginia, west virginia , wisconsin and the district of columbia, during the coating process of the fuel filler tube assembly, an insufficient amount of coating may have been applied at the lower mounting bracket. This could result in an opening in the coating which can allow water to enter and make contact with the bare metal of the tube.

NHTSA · United StatesSep 18, 200707V435000Model years 1997–2001View details →
Pathfinder Infiniti QX4 · 1996–2002
RecallCriticalEngineNA

Fuel System

On certain vehicles, inadequate coating of the fuel filler tube assembly could allow water to penetrate past the coating and cause surface rust. In areas which use heavy concentrations of road salt in the winter, corrosion may occur to a degree which results in perforation of the tube. In this case, fuel leakage may occur when filling the tank or shortly thereafter. Fuel leakage, in the presence of an ignition source, could result in a fire. Correction: Dealers will replace the fuel filler tube assembly.

Transport CanadaSep 13, 20072007300Model years 1997–2001View details →
Pathfinder III · 2004–2014Pathfinder IV · 2012–2020
RecallModerateEngineNA

Engine and engine cooling

Nissan is recalling certain model year 2011 infiniti fx, model year 2012 infiniti m, model year 2011-2012 nissan frontier, model year 2011-2012 nissan xterra, model year 2011-2012 nissan pathfinder, and model year 2012 nissan nv vehicles. Some of the bolts that connect the engine oil cooler and the engine oil filter to the engine in these vehicles may have been manufactured to below specification strength. As a result, the bolt may break at the oil filter attachment point and can cause an engine oil leak.

NHTSA · United StatesDec 19, 201111V592000Model years 2011–2012View details →
Pathfinder II · 1995–2004Pathfinder III · 2004–2014
RecallModerateEngineUK

Engine may stall & fail to restart

It has been identified that it is possible that the contacts in engine control module (ECM) and ignition relay situationed in the Intelligent Power Distribution Module (IPDM) may become contaminated with silicon oxide due to the evaporating of the silicon from within the units. In extreme cases this could result in the stalling of the engine and the failure to restart the engine.

DVSA · United KingdomNov 29, 2010R/2010/185Model years 2004–2006View details →
Pathfinder III · 2004–2014
RecallModerateEngineNA

Fuel system, gasoline:Storage:Auxillary tank

Nissan is recalling certain model year 2006 and model year 2008 frontier, xterra and pathfinder vehicles. The molded fuel tank shells can deform, causing the fuel sender float arm to contact an embossment molded into the tank shell causing the instrument panel fuel gauge to show that the vehicle has approximately one quarter tank when the fuel tank is empty.

NHTSA · United StatesMar 3, 201010V075000Model years 2006–2008View details →
Pathfinder III · 2004–2014
RecallMinorEngineNA

Engine

On certain vehicles, the engine oil cooler stud (onto which the oil filter is mounted) could fail. This could cause an engine oil leak, which could illuminate the instrument panel's engine oil warning lamp. Abnormal noise and rough engine performance may also be noticed and, in the worst case, the engine could fail and stop suddenly while the vehicle is in motion. Engine failure would result in lost vehicle propulsion which, in conjunction with traffic and road conditions, and the driver's reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the engine oil cooler connector stud.

Transport CanadaDec 20, 20112011436Model years 2011View details →
Pathfinder II · 1995–2004Pathfinder III · 2004–2014
RecallMinorEngineNA

Engine

On certain vehicles the Intelligent Power Distribution Module (IPDM) assembly contains an Engine Control Module (ECM) relay that has a diode for electrical current noise reduction. The ECM relay may allow silicon vapor to form and over time the silicon evaporates from the diode molding which causes silicon oxide to develop on the ECM relay contact due to arcing. In certain instances, this oxidation could cause engine performance issues (hesitation, rough engine idle, slow start/no-start condition), and engine stalling at low engine speeds which may result in a crash. Correction: Dealers will replace the Engine Control Module (ECM) relay.

Transport CanadaOct 28, 20102010373Model years 2004–2006View details →
Pathfinder III · 2004–2014
RecallMinorEngineNA

Engine and engine cooling

Nissan is recalling certain model year 2004-2006 armada, titan, infiniti qx56 and model year 2005-2006 frontier, pathfinder and xterra vehicles. The intelligent power distribution module (ipdm) assembly contains an engine control module (ecm) relay that has a diode for electrical current noise reduction. The ecm relay may allow silicon vapor to form and, over time, the silicon evaporates from the diode molding which causes silicon oxide to develop on the ecm relay contact due to arcing.

NHTSA · United StatesOct 28, 201010V517000Model years 2005–2006View details →

Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).