Free to read · free account to contributeSuccessor to Anticars (2000)
Sign inCreate account
NANHTSA · manufacturer bulletin10223854

Service bulletins

Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 Nm [21 ft. lbs.].

Concerns: Dodge Avenger sedan (Model years 2008) · Dodge Caravan IV (Model years 2007) · Dodge Challenger (Model years 2008) · Dodge Durango II (Model years 2007) · Dodge Magnum (2005–2008) (Model years 2007) · Dodge Neon II (Model years 2001) · Dodge Nitro (Model years 2007) · Dodge Ram II (Model years 1998) · Dodge Ram SRT-10 (Model years 2006) · Dodge Ram Van III (Model years 2001) · Dodge SRT-4 (Model years 2005) · Ram ProMaster III (Model years 2015–2016)

Official notice ↗

Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).