The grease applied to the contacts inside the ignition switch has an inappropriate composition. As a result, when the ignition switch is turned off slowly, the arc discharge time at the contacts increases. When the contact temperature rises, the grease hardens, and if this operation is repeated, cuprous oxide forms on the contacts, causing poor electrical continuity at the contact section. Therefore, vibration during driving may cause poor contact continuity, which may stop the engine and make it impossible to restart. In addition, the contacts may overheat locally and the solder on the back side of the contacts may melt. In the worst case, molten solder may fall onto the driver's feet and cause burns.
Risk: 最悪の場合、運転者の足に落ちて火傷をするおそれがある。
Remedy: 全車両、イグニッションスイッチを対策品と交換する。