Fuel system, gasoline:Delivery:Hoses, lines/piping, and fittings
Vehicle description: Pickup trucks with a 131 inch wheelbase. Some of these vehicles may have been built with inadequate clearance between the fuel line and the cab underbody.
Vehicle description: Pickup trucks with a 131 inch wheelbase. Some of these vehicles may have been built with inadequate clearance between the fuel line and the cab underbody.
Two fuel tank support strap attaching studs were not adequately tightened, which could cause one or both of the strap(s) to separate, mislocating the fuel tanks or allow complete separation of the fuel tank from the vehicle.
An improperly routed transmission wiring harness may come in contact with the fuel hoses and cause fuel hose abrasion. This could result in fuel leakage with the potential for a vehicle fire. Correction: A tie strap will be installed to secure the transmission wiring away from the fuel hoses.
Steel braided fuel hose routing may allow contact between the hose and transmission wiring harness.
La junta de la tapa de válvulas del motor podría desplazarse y provocar una fuga de aceite del motor por dicha junta.
En los vehículos con motor EFI de 2.2 litros o 2.5 litros (no turbo), la junta de la tapa de válvulas puede presentar fugas de aceite, lo que genera el riesgo potencial de un incendio en el compartimento del motor. Corrección: la junta de la tapa de válvulas será reemplazada por una tapa revisada y se aplicará sellador RTV en lugar de la junta.
The fuel tank support strap attaching studs may not be adequately tightened. This could result in disengagement of the support strap joint which could in turn cause the fuel tank to drop down. Correction: Fuel tank support strap attaching studs will be tightened to specified torque.
Algunos vehículos no cumplen con la norma CMVSS 1105 sobre emisiones evaporativas. Depósito de evaporación defectuoso.
Speed control system cables may partially disengage and bind at the carburetor throttle lever attachment.
차동장치의 뒤쪽 피니언 너트가 피니언 너트 나사산에 접착 패치가 없는 상태로 제작되었을 수 있습니다. 이 접착 패치가 없을 경우 뒤쪽 액슬 피니언 너트가 느슨해지거나 뒤쪽 구동 샤프트가 차동장치에서 떨어져 나갈 수 있습니다. 피니언 너트가 느슨할 경우 차동장치로부터 떨어져 나간 구동 샤프트로 인해 엔진의 힘이 바퀴로 젂달되지 않을 수 있습니다. 어느 경우이든 경고 표시 없이 충돌을 유발할 수 있습니다
Note: Vehicles with 3.9 litre engine and automatic transmission. These vehicles do not comply with c.M.V.S.S. 1101 - emission device. Vehicles were built with an incorrect underhood emission information (veci) label. The labels incorrectly identify the vehicle as certified to california standards. Correction: Owners will be supplied with correct labels and installation instructions.
Fuentes: NHTSA (Estados Unidos, dominio público), Transport Canada (Licencia de Gobierno Abierto – Canadá), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso y Safety Gate de la UE (Francia, Licence Ouverte 2.0), MLIT (Japón, Licencia de Datos Públicos 1.0) y MOLIT (Corea del Sur, car.go.kr).